Top Parallel Leveling Ruler Reviews

Mr. Pen - T Square, T Ruler, 12 inch Metal Ruler, T Square Ruler, Drafting Tools, Architect Ruler, Set Square, Drafting Ruler, Tsquare, Truler, Architectural Triangle, Tee Ruler, L Square, Scale Ruler

  • 【MULTIFUNCTION 3D SADDLE SQUARE 】There are over 10 functions for this woodworking tool: three-dimensional marks, 45°angel and 90°angel limit stop, Dovetail Template, marking gauge for parallel lines, drill gauge, ruler for vertical line and parallel line, T-shaped Scribe, Protractor. 10 in 1 design, this multifunctional 3d carpenters square is more convenient for engineers and carpentar..
  • 【PREMIUM MATERIAL ANGLE RULER】The t square woodworking ruler are made of high-quality aluminum alloy. The real material is non-deformable, anti-drop, anti-corrosion. Compared with other universal angle ruler, 3d square woodworking tools is more durable and longlasting. Even using it for drilling positioning, it still works well and would not break. Also with the fine polishing surface, angle ruler woodworking is comfortable in your hand..
  • 【ACCURATE MEASUREMENT】Laser engraved marking makes the number embedded in aluminum material, so T square ruler will not wear out and never fade.With clear engraving metric scales, Aweohtle t square ruler is accurate and easy to read. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree angles.With 45°& 90°limit stop and 0-90° scale, aluminum angle ruler could allow you t....
Check Stock

MUSIBO Protractor Angle Finder, Woodworkers Edge Ruler, T Square, T Ruler, Straight Edge inch Ruler,Multi-Function Angle Measure Tool Woodworking Metal Ruler Kit with Wall Hanging Storage Rack(13in)

  • MULTI-FUNCTION: MUSIBO woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work. Each woodworking ruler is equipped with a wall-mounted storage rack, which make it easy to store. MUSIBO woodworking protractors & ruler is an indispensable tool for every woodworkers and mechanics.
  • HIGH PRECISION: The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 13in, and the smallest scale is accurate to 1/32in. There are 104 serrated notches and 13 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • SIMPLE OPERATION: You can make the cross surface of the disc next to the edge of the board, then turn the ruler to get the angle you want. Adjust the nut to get the best feel. Place the tip of the pencil in the saw tooth notch and then move the ruler along the edge of the board to get different parallel lines. In short, you can ....
Check Stock

MIECOO 19PCS Guitar Repair Tool Kit with 8 Inch Guitar Fret Leveling Beam 9 Understring Radius Gauge Fret Crowning File String Action Ruler Gauge Fretboard Guard Screwdriver and Sandpapers

  • 【GUITAR LUTHIER TOOL KIT INCLUDES】1 x Fret Leveling Sanding Beam (8 inch).
  • 【FRET CROWNING FILE & FRETBOARD GUARDS】made of stainless steel & durable. Fret crowning file is used to narrow fret crowning after leveling, and....
  • 【9 UNDERSTRING RADIUS GAUGE】made of stainless steel & durable. Set of 9 including 7.25", 9.5", 10", 12", 14", 15", 16", 17" and 20" radius gauge,....
  • 【FRET LEVELING SANDING BEAM】made of aluminum alloy material, strong, rust-proof and fine workmanship. There are four kinds of self-adhesive....
  • 【STRING ACTION RULER GAUGE】made of stainless steel & pocket-sized. Used to measure string height, bridge saddle height, pickup polepiece height,....
Check Stock

Precision Pocket Ruler 6 Inches Woodworking Scribing Ruler Professional T Track Ruler Carpenter Marking Measuring Tool Ruler Inch/Metric Indicators with Slide Stops Pocket Clip Scale Metal Ruler Kit

  • ...ich can meet a variety of measurement needs..
  • ▶【Multi-Function Ruler】Multi gauge measuring tool is absolutely versatile.With Marking Rule Set you can do different things! From measuring depth, width to drawing lines. This multifunctional ruler can draw horizontal lines, vertical lines, long lines, short lines, parallel lines, and right-angle lines to meet your various marking needs..
  • ▶【BUILT IN SLIDE STOPS】Our folding ruler is equipped with a detachable design of the card standard clasp. When you use it with the buckle, you can effectively fix the ruler, which is convenient for fixing and marking. When you remove the buckle, the scribing ruler immediately transforms into a high-hardness straight ruler for easy measurement..
  • ▶【Designed for Woodworking】: T-Type Ruler is moderate in size and easy to carry. The lightweight ergonomic structure conforms to the force fulcrum of the human body, which can reduce the pressure on the elbow or wrist of the user when measuring and marking. T square ruler can be used in workshops, home improvement, toolboxes, cabinet. Suitable for carpenter,designers,architects,engineers.
Check Stock

Amazon Basics 9-Inch Magnetic Torpedo Level and Ruler, 180/90/45-Degree Bubbles

  • High accuracy 9-inch spirit level for easy leveling.
  • Torpedo level with 3 separate vials for easy leveling: horizontal, vertical, and 45 degrees (1.0mm/m accuracy).
  • 3 easy-to-read vials made of durable supremely transparent acrylic glass with smooth inner contours and bright fluorescent liquid inside.
  • Integrated ruler provides measuring marks in both metric and imperial scale.
  • Magnetic edge for convenient, hands-free use — great when working with steel materials.
  • Lightweight yet durable ABS and aluminum frame.
  • hole for convenient hanging and carrying.
  • Ideal for decoration, home furnishings, and related work for aligning, such as measuring locations on a wall, space between hangers, leveling nails.
Check Stock

Scribing Ruler, Stainless Steel T Type Hole Ruler Scribing Gauge Woodworking Marking Measuring Tool for Positioning and Marking Works (300mm)

  • 【MATERIAL】 The marking ruler is made of high-quality stainless steel, which is not easy to rust, has fine workmanship, and has no burrs..
  • 【PRECISION】 The woodworking ruler has a minimum accuracy of 0.25mm for more precise operation. Suitable for positioning and marking..
  • 【CLEAR SCALE】 Scribing gauge uses magnetic stripe engraving, clear scale, convenient reading and longer service life..
  • 【DIFFERENT SIZES】 Many different sizes, you can choose according to your needs. Measuring range: 0-200mm, 0-300mm, 0-400mm (optional)..
  • 【APPLICATION】 Multifunctional marker ruler is mainly used to draw horizontal lines, vertical lines, long lines, short lines, parallel lines and right-angle lines, etc..
Check Stock

Stainless Steel t Square, Incra T Rule, Edge Ruler Woodworking, Compass and Protractor Set, Multi-Function Angle Measure Tool with Wall Hanging Storage Rack(18-INCH)

  • FUNCTION:woodworking protractors & ruler is a multifunctional device for length measurement and angle drawing. It can measure lengths and draw parallel lines at different angles and intervals easily, which will bring much convenience to your work.
  • PRECISION:The ruler tool can be adjusted from 0° to 70°, every 5° (plus 22-1/ 2°, 67-1/ 2°) has a steel ball to lock the angle firmly during the painting lines.
  • Any angle can be obtained by moving and rotating the ruler. The ruler has a total length of 18in, and the smallest scale is accurate to 1/32in. There are 144 serrated notches and 18 circular holes, The spacing of the serrations is 11/112in (approximately equal to 2.49 mm) and that of the round holes is 1in.
  • MATERIAL:The dial of this adjustable woodworkers edge rule is made of hard plastic, both the angle finder and ruler body are made of stainless steel, which is moisture-proof, rust-proof and corrosion-resistant. The laser scale is clear and precise, does not fade, and effectively extends its service life.
  • T-SHAPED DESIGN: this angle measure tool is designed with t-shape, a series of precision-machined index ....
Check Stock

Multifunctional Drawing Ruler,Plastic Measuring Template Rulers Multipurpose Draw Round Curve Horizontal Parallel Line Vertical Parallel Line for Drawing Engineering Drafting School Office Supplies

  • Wide Applications: Versatile measuring ruler, with a protractor to draw the desired figure, can also draw arcs curve, horizontal parallel line,....
  • More Details: Each centimeter has a circle hole for drawing circles and ellipses.
  • Clear scale, easy sliding, stable drawing, not easy to skew, clear....
  • Multiple Uses: Whether you are an artist, student, pattern maker or designer, this measuring rolling ruler is a good helper for your work or study.
  • Quality Material: Made of transparent plastic.
  • It's light-weighted, easy to carry. Transparent material allows you to draw without ignoring some....
  • Draw all figures with this Multifunctional Ruler! Fast, accurate, no auxiliary lines!.
Check Stock

ZQYA Woodworking 350mm/13.7\ Adjustable Right Angle Ruler Alloy 45/90 Degree W/Bubble Level Gauge Metric and Imperial Measuring Tool Chamfer Gauges (Color : WZTR350)

  • Functions: 45-degree angle, 90-degree right-angle drawing line, parallel line, height gauge, sliding marking line, level meter.
Check Stock

Guitar Neck Notched Straight Edge Luthiers Tool with Guitar Fret File, Fret Rocker, Fingerboard Guards Protectors and Grinding Stones for Gibson 24.75' and Fender 25.5' Electric Guitars

  • ...turdy enough for your long-term use. Size: 16.5 x 1.45 x 0.13 inch. Dual scale design, works well with most guitar, specially suits for Gibson(24.75") and for Fender(25.5") electric guitars..
  • Fret File - Made of stainless steel and rubber handle. With same filing size on both 2 edges, narrow fret crowning file after leveling. Fit for most fret specification on the markets such as electric guitar, acoustic guitar ,bass, Ukulele etc..
  • Fret Rocker & Fingerboard - Made of stainless steel. The Fret rocker has 4 flat and straight edges, which can help your to detect any discrepancy existing in frets height.The fingerboard designed to protect your guitar or bass fretboard from scratching or damaging while filing and polishing.
  • Grinding Stones - Color: orange and green.
  • Professional tool for polishing saddle, nut and frets..
Check Stock

Aluminum Alloy Woodworking Square Size Measure Ruler, welltop 3D Mitre Angle Measuring Tool, Multifunctional 45/90 Degree Angle T Ruler Gauge, for Three Dimensional Items Measuring Timber, Pipes

  • 【Multifunctional 3D Mitre Angle Ruler】The angle ruler has more than 10 functions, 10-in-1, which are: square, protractor, dovetail template, circular hole, parallel line, vertical line, drilling positioning, T-shaped dovetail joint, 45° angle, 90° angle, ten common angles to meet your different needs..
  • 【Tough & Durable Material】The 3D mitre angle measuring tool is made of high quality aluminum alloy material, high hardness, high toughness, non-toxic, rust-proof, durable and non-deformable, high-precision measurement and long life span. Compared with other plastic rulers, which is more durable and has higher accuracy..
  • 【High Measurement Accuracy】Superb carftsmanship, square marking gauge, fine polishing surface, comfortable in your hand, and easy to use. 3D design, no need to flip the body when measuring, just slide to mark the left and right 45 degree or 90 degree angles. The measurement accuracy is 1mm. It can help you to improve working efficiency and save time with woodworking projects..
  • 【Clear Scale】The multi-functional angle ruler with clear engraving metric scales, is easy to read and elegant in ....
Check Stock

WeldingStop 6 in Machinist Ruler Scale 5R 10ths 1/100 1/32 1/64 Graduation Flexible Decimal Inch Steel Rule

  • This a 6 in machinist scale or 150mm length and 5R ruler rigid which is made by high quality Stainless Steel, it can be lightly flexible and thin.
  • 5R scale graduations have 10th and 100th on one side and quick-reading 32th and 64th machinist scale inch on the other side.
  • The sides of each machinist rule are ground parallel and each end is accurately ground square to allow reading from either end.
  • The ruler is 1/2'' or 12.5mm width, and 0.025'' or 0.6mm thickness. Both long edges are ground flat and straight.
  • All the scales are Laser Engraving, very clear and easy to read. This type of engraving can make the scale not easy to wear after long time using.
Check Stock

Woodworking T Square Ruler Aluminum Alloy Adjustable Angle Scriber Carpentry Scribing Tool Suitable for Woodworking Positioning and Marking 370mm

  • Sturdy and Durable: It is made of high-quality aluminum alloy material, and the surface is anodized, which is durable and has a long service life. It....
  • High Precision: The scale is clear and standard, the reading is clear, accurate and convenient, which makes the operation more precise, efficient,....
  • Specifications and Sizes: There are two styles of 170mm and 370mm scales to choose from, which can meet different needs.
  • Safety Protection: The overall design is humanized and angular, which can prevent safety problems caused by improper operation, protect your safety,....
  • Multi-purpose: This multifunctional ruler can mark horizontal lines, vertical lines, long lines, short lines, parallel lines, and right-angle lines.
Check Stock