Top Orifice Nozzles Reviews

mistcooling Patio MISTING KIT (72 Feet - 20 Nozzles)

Features: 72FT System 15FT Mist Line- and 57 Ft Feed Line 20 Nozzle System Evenly Spaced Nozzles at 3FT to prevent wetness on the surface 19 Misting Tees 1 Misting End Elbow Comes Complete with clamps, no additional parts needed to use.
Completely Assembled - Can be easily attached to any surface - Directional Spray Misting - Simply fix to your garden hose and ready to use.
Tubing : ¼” OD Flexible PE Tubing - Max burst pressure is 300 psi at 75°F- UV Resistant Flexible Tubing.
Nozzles : Nickel-plated brass button series - With stainless-steel Orifice - Standard 10/24” thread in - 0.015” OD Orifice - Rust-resistant fixed impeller pin.
3/4" Garden Hose Inlet with screen filter washer. MC11285.

Check Stock

32 Pieces Brass Misting Nozzle 0.3 mm/ 0.012 Inch Orifice Replacement Head Low Pressure Atomizing Misting Nozzle and 10-24 Drill and Tap Bit for Outdoor Cooling System Patio Misting System

【PACKAGE】30PCS Brass Stainless Steel Misting Nozzles For Outdoor Cooling System..
【MATERIAL】The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water..
【TECHNICAL PARAMETERS】High Pressure Outdoor Anti-drip Fogging Spray Head, 0.012" (0.3mm) orifice diameter, 10-70kg working pressure, 60-110ml/min flow rate.It is recommended to increase the use of pumps to achieve a better spray effect..
【EASY TO INSTALL】 The brass misting nozzles are easy to install, which can be easily screw into any 3/16"( UNC 10/24) threaded mist nozzle opening..
【WIDE USAGE】The misting nozzles is widely applied to outdoor cooling system, agriculture irrigation system, green house, spray disinfection, epidemic prevention, deodorizing air purification, landscaping, small fountain, etc..

Check Stock

mistcooling Stainless Steel Fan Misting Ring

12 Inch Stainless Steel Mist Fan Ring with 4 Nozzles and 6 FT Supply Line with Garden Hose Adapter.
Adjustable spray direction. Fan mist kit does NOT include fan.
Ultrafine brass/stainless steel nozzles included - 0. 015" Orifice - 10/24 thread nozzles.
Ready to use - no other parts needed - simply attach to your Outdoor fan.

Check Stock

M MINGLE Foam Cannon Orifice Nozzle Tips and Foam Maker Universal 1.1 mm Thread Nozzle and Mesh Filter for Snow Foam Lance 3000 PSI

ATTENTION: Please screw in the orifice nozzle tighten enough, or it is hard to get thick foam..
Include 1 piece of foam maker (mesh filter) and 1 piece of orifice nozzle tips (foam generator nozzle). They assembly inside foam cannon for foam....
If foam cannon works not very well as before, maybe mesh filter wore down and foam cannon orifice tips blocked. You can replace them with new ones and....
FOAM MAKER: Size: Diameter 0.61 x Height 0.41 inch.
foam creator made of stainless steel, work durably in the foam sprayer.
ORIFICE NOZZLE TIPS: NPT male screw nozzles, about 0.28 inch, Orifice Size 1.1 mm. Made of brass, work durably in the foam lance. Max. Pressure: 3000....

Check Stock

Tool Daily Pressure Washer Nozzle Tips Multiple Degrees, 1/4 inch, 5-Pack (Orifice 3.0)

ATTENTION: Please see Image 2 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 3.0. The working pressure is up to 4000 PSI..
Different angle allows you to clean hard-to-reach areas quickly and easily.
Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
Don’t use a ladder to clean or sprinkle water for tree with these nozzles.
More Application: Can be attached to a Quick-Connect Wand for swifter application and more.

Check Stock

Tool Daily Pressure Washer Nozzle Tips Multiple Degrees, 1/4 inch, 5-Pack (Orifice 3.5)

ATTENTION: Please see Image 2 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 3.5. The working pressure is up to 4000 PSI..
Different angle allows you to clean hard-to-reach areas quickly and easily.
Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
Don’t use a ladder to clean or sprinkle water for tree with these nozzles..
More Application: Can be attached to a Quick-Connect Wand for swifter application and more.

Check Stock

Tool Daily Pressure Washer Spray Nozzle Tips Multiple Degrees, 1/4 inch 5-Pack (2.5 GPM)

ATTENTION: Please see Image 6 and find the orifice you need based on working pressure and flow rate (GPM). The orifice of these nozzles are 2.5. Different angle allows you to clean hard-to-reach areas quickly and easily.
Nozzle Tips set includes: 1 Red Stainless Steel Nozzle Tip (0 Degree), 1 Yellow Stainless Steel Nozzle Tip (15 Degree), 1 Green Stainless Steel Nozzle Tip (25 Degree), 1 White Stainless Steel Nozzle Tip (40 Degree), 1 Brass soap nozzle tip (65 Degree). Choose different angles nozzle according to the actual need.
Don't use a ladder to clean or sprinkle water for tree with these nozzles.
More Application: Can be attached to a Quick-Connect Wand for swifter application and more.

Check Stock

High Pressure 3/16\ Threaded Outdoor Anti-drip Fogging Spray Head Misting System Nozzle, Orifice 0.3mm 10-Pack

High Quality Material: The misting nozzles are made of brass with stainless steel orifice, anti-rust, durable, leak-proof, the mister nozzle is best choice for outdoor use with cold water.
Wide Usage: Widely apply for garden, patio, lawn misting system, outdoor cooling, greenhouse, humidification, spraying disinfectant, epidemic prevention, deodorant air purification, small fountain, outdoor cooling system, agriculture irrigation system, etc..
Dimension: Thread size is UNC 10-24, Orifice diameter is 0.4mm.
Easy to Install: The brass misting nozzles are easy to install, which can be easily screw into any 10/24 UNC threaded mist nozzle opening.
Leak-proof, self-sealing o-ring included with each brass nozzle.

Check Stock

MUTURQ 25 Degree Surface Cleaner Tips with 2.5 Orifice 1/4 Male NPT 4000 PSI Threaded Spray Nozzles Stainless Steel 2 Pcs

【25 Degree, 2.5 Orifice, 2.5 GPM】Include 2 pieces of pressure washer surface cleaner nozzles, universal replacement screw type nozzle for water....
【Max Pressure 4000 PSI】Made of 304 stainless steel, more durable resistant and good quality for using a long time..
【Product Details】1/4'' Male NPT, Orifice Size is 2.5, Spray angle is 25 degree, 2.5 gpm. The outsize diameter of thread is 0.55 inch. Length of....
【Please Note】If nozzles are blocked with sand or other debris, you can remove the nozzle, clean with needle and rinse with fresh water..
【Full Service】If you have any usage problems in after sale, you can contact us by email at any time, and we will offer solutions or replacement....

Check Stock

Tool Daily Pressure Washer Sandblasting Kit Wet Sandblaster Attachment 5000 PSI 1/4 Inch Quick Disconnect Orifice 3.0

Orifice 3.0. Minimum Flow Rate: 2.5 GPM. Minimum Pressure: 2700 PSI. Please check image 4 to choose the size of orifice. If you need orifice 2.5,....
The pressure washer sandblasting attachments have a goggle, 10’ hose, 16’’ pressure washer wand (water input), 17’’ sand wand (sand input)....
Replacment Nozzles are available. Product "Tool Daily Pressure Washer Sandblasting Nozzle, Replacement Wet Sandblaster Attachment, 5000 PSI, 2-Pack".....
Application: pressure washer sandblaster kit works for abrasive cleaning. Great for removing rust, graffiti, paint, baked on grease..
Pressure washer sand blasting attachments use dry silica sand, baking soda or washed and dried river sand..

Check Stock

RIDGE WASHER 1.1 mm Foam Cannon Orifice Nozzle, Universal Thread Tips for Snow Foam Lance, 2-Pack

Universal orifice nozzle to generate thick foam inside foam cannon, 2-pack.
Orifice size 1.1 mm, Male NPT screw fitting, about 1/4 inch. Working Pressure is up to 3000 PSI..
If foam cannon works not very well as before, maybe orifice tip damaged or blocked. You can replace with new one and it will recover..
Include 2 pieces of high replacement foam generator nozzles for snow foam lance. Made of brass, work durably in the foam cannon..
If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..

Check Stock

Hourleey Sewer Jetter Kit for Pressure Washer 50FT, Drain Cleaner Hose 1/4 Inch NPT, Orifice 4.0 Button Nose and Rotating Sewer Jetting Nozzle Spanner Tape Pearl Corsage Pin, 4000 PSI

Sewer Jetter Kit Package Incldue: 1 × 50ft sewer jet hose with 1/4" NPT male connector, 1 × Orifice 4.0 button nose sewer jet nozzle, 1 × Orifice 4.5 button nose sewer jet nozzle, 1 × Orifice 5.5 button nose sewer jet nozzle, 1 × M22 female thread to 1/4" female thread coupler, 1 x 1/4" quick connector, 1 x rotating nozzle, 1x waterproof tape, 1 box x pearl corsage pin, 2 x spanners..
High Quality Pressure Washer Hose Kit: Small-diameter, flexible sewer jetter hose with a connector that allows hoses and nozzles to pass through sewer lines. PE pipe, PVC coating, Dual-layer terylene reinforcement, very durable, can resist weather, oil, ozone and abrasion..
4PCS Efficient Sewer Jetter Nozzles: Hourleey update sewer jetter hose equip with 4.0, 4.5, 5.5, 3 different orifice sewer jet nozzle. There are 1 spray jet in the front and 3 rear 33° spray jets, it can efficient clean the blockage flush debris and the corner. And the rotating jet nozzle can 360 degree clean the flush around the drain and sewer lines..
Easy to Use with Quick Connect Plug: The 1/4 inch quick connect is easy to connect with most high pressure washer accessories. Suitable for many electric / gas-powered pressure washers up to 4,000 PSI. Hourleey sewer jetter hose can be connected to....

Check Stock

mistcooling Outdoor Misting System Kit-125ft-30Nozzles Cooling Kit-125, 125 Ft-30 Nozzle

...or large patios, play areas and livestock areas. For Stables, and Livestock areas. Not to be used with Misting Pump..
Tubing: 3/8” OD Flexible PE Tubing, Max burst pressure is 300psi at 75°F, UV Resistant Flexible Tubing, Easy to Cut , Easy to bend. Nozzles: Nickel-plated brass button series, with stainless-steel Orifice, Standard 10/24” thread in, 0.015” OD Orifice, Rust-resistant fixed impeller pin.
Fittings: 3/8” OD, Compression Fittings, Beige Color to blend with most patios and backyards, Compression Type Fittings, Leak Proof, Fittings Included – Misting Tees, Misting End Elbow , Coupler, Compression Elbow for Corners , and 3/8 Compression Tees to split the mist line. Garden Hose Adapter:3/8” OD, Fits most Garden Faucets, With Filter, Washer to protect your nozzles..
¾ Inch “Y” Connector – Hose Splitter : Dual shut-off valve controls water flow , Extra large , plastic handles for easy grip and turn , Easy-on swivel connector prevents hose kinks by allowing hose to turn , 2 Way Y Hose Splitter : The garden hose splitter has 2 Way connectors and 2 valves. After using the water splitter, it easily converts 1 spigot into 2 high flow water sources. It can make your garden life easier..

Check Stock