Top Operating Room Arm Positioners Reviews

Aven 26526 Sirrus Task LED Light with Swivel Head, 500 mm Flex Arm and Mounting Clamp

  • 500mm(19.5”) industrial grade flexible gooseneck coated arm.
  • Arm stays set in any position to provide direct light where needed.
  • Exceptionally long LED element life (minimum 20,000 hours).
Check Stock

Aven 26527 Sirrus Task LED Light, High Intensity Fixed Focus with 500 mm Flex Arm and Mounting Clamp

  • 500mm(19.5”) industrial grade flexible gooseneck coated arm.
  • Arm stays set in any position to provide direct light where needed.
  • Exceptionally long LED element life (minimum 20,000 hours).
Check Stock

Rockville PC Gaming Streaming Twitch Bundle RCM03 Microphone+Headphones+Boom Arm

  • ...e diaphragm for smooth, natural sound and low noise. Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer).
  • Uni-directional. Sensitivity: -27dB2dB(0dB=1V/Pa at1kHZ). Output impedance: 2000%(at 1kHz). Standard operating voltage: 3V. Operating voltage range: 1.5V-10V. Current consumption: less than 500uA. Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB. Frequency Response: 30Hz - 20 KHz. Fixed Crossover Filter cutoff frequency: 40Hz---16 KHz. Load impedance: Greater or = to 1000 Ohms. Equivalent Noise level: Less than 18dB A (IEC581-5).
  • Max. Input SPL: 126dB(THD.0% at 1kHZ). Electrical current: Greater than 4.8Ma. Microphone body net weight:320 Grams (0.7 Pounds). Microphone Max.diameter 44mm (1.73 inches). Microphone Length 217mm (8.54 inches). Microphone material: steel grille + Alluminum (handheld part). PCB Layout: Surface mount. Features: RockvilIe DMS40 40" Studio Desk Clamp Microphone Stand w/Boom Arm. Articulating microphone boom arm. Suitable for studios, broadcasting, podcasting, and more.
  • Arms: 20"+20" arm length for adjustment. C-shape desk clamp is made of aluminum alloy. Fits any desk less than 2 inch thi....
Check Stock

KST DS215MG Micro Digital Servo

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • It is tiny and lightweight with high output power..
  • Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9G micro servo motor for remote control helicopters, micro robot, robot arm and boats..
Check Stock

Songhe MG90S Mini Micro 9G Servo Metal Geared Micro Servo Motor for RC Helicopter Plane Boat Car 5pcs

  • For Stall Torque: 2.2kg/cm(6V),and amplifier type: Analog controller.
  • Operating Speed for working: 0.1sec/60 degree(4.8V)~0.08sec/60 degree(6.0V).
  • Operating Voltage : 4.8V~6.0V,The starting current of the motor should be over than 1A.
  • Use on: remote control helicopters, micro robot, robot arm and boats.
Check Stock

Ergodyne 11604 ProFlex 1100SF Back Support Brace, 8\ Spandex Belt, Patented Stays Provide Added Support, Large,Black

  • NON-CONDUCTIVE Patented non-conductive Sticky Fingers stays for long wear and secure fit.
  • EASY ADJUST Innovative Power Panel Positioners ensure the tension bands stay close by.
  • COMFORTABLE STRETCH 280D spandex body material.
  • SUSPENDERS Adjustable, detachable suspenders keep back brace in place.
  • SIZING Waist size ranges from 25in - 58in / 64cm - 147cm.
Check Stock

Seamuing Micro Servo Motor MG995 RC Servo 20kg Metal Gear Servo for RC Robot Arm Helicopter Airplane Remote Control 4PCS

  • Fits for RC Robot, Helicopter, Drone, Car, Boat.
  • Operating Speed (4.8V no load): 0.1sec/60 degrees.
  • Stall torque: 1.2kg / 1.4kg/cm(4.8V). operating voltage: 4.8V-6V.
  • Packaged Included:( 1 x SG90 Gear Micro Servo, 1 x roker arm, 1 x screw)*1pc/ 2 pcs/ 4pcs.
Check Stock

Office Chair Arm Pads Covers-Ergonomic Armrest for Desk and Chair Office Chair Armrest Covers, Office Chair Arm Pads for Elbows and Forearms, Office Chair Cushion for Gaming Accessories (Set of 2)

  • ...a cooling gel pad top. Soft and skin-friendly fabric, the chair armrest pads provide enough cushioning to relieve pressure between your arm and elbow, bring super comfort by keeping cool and absorbing heat.
  • 【Comfortable Dorm Essentials】 -- Our arc office chair arm covers follow the ergonomic design, perfect dorm room essentials to fit the curve of the arm, offer extra support and soft touch for your elbow, wrist and arm, reducing your stress and pain. This college dorm essentials with three-dimensional support, solve the problem of hard armrests, arm soreness and joint discomfort, relax your arm and body.
  • 【Breathable & Washable】 -- Our arm rest cushions also feature breathable mesh covers to dismiss heat, make sure not to sweat. Arm chair arm covers has Velcro and particles at the bottom firmed the arm pads on the chairs. The mesh cover is is equipped with an invisible zipper, detachable and easy to machine washing. Note: the memory foam is not to wash and exposed to the sun.
  • 【Suitable for Versatile Chairs】- The chair arm covers size is 9.8*3.93*2.75 inches, cover office chairs, gaming chairs, desk, chairs, and wheelchairs by adjusting the height. Fit in office accessories, gaming desk accessories, college essentials and computer chair cushi....
Check Stock

JWISLAND 6Pcs SG90 9g Micro Servos Motor Nylon Gear for RC Robot Helicopter Airplane Controls Car Boat

  • The plastic geared servos are consistent, relatively low noise and low current, and with less jitter issues, and last longer among the peers..
  • Operating speed: 0.1second/ 60degree ( 4.8V no load).
  • Lightweight and durable! Simple & inexpensive..
  • Application: Used for remote control helicopters, micro robot, robot arm and boats. Fit for ALL kinds of R/C Toys and also make electronics DIY compatible with Arduino, Raspberry Pi.
Check Stock

OWI Inc Hydraulic Arm Edge Kit DIY STEM STEAM Robot Arm

  • Step away from the grid - Hydraulic Robotic Arm - No Electricity or batteries needed.
  • Discover hydro-mechanical technology and have fun operating your own hydro-mechanical robotic arm.
  • Removal the gripper and activate the suction apparatus. Enables operators to "vacuum" and lift objects.
  • 6 Axes of movement: Gripper opens to 1.89 inches, Wrist rotation 180 degrees, Wrist mobility 98 degrees, Elbow range 44 degrees, Base rotation 270 degrees, and shoulder motion 45 degrees.
  • Detailed graphic illustrations equate to successful kit building. - OWI products are made in Taiwan and include assembly instructions only in English. Other items not matching these descriptions are illegal copies.
Check Stock

Kingfun 4pcs Orthopedic Bed Wedge Pillow Set, Post Surgery Memory Foam Wedge Pillows for Sleeping, Adjustable Leg, Back Support, Arm Pillow, Sitting Up Bed Rest Sleep Pillow with Travel Bag

  • ...llow can be used to support the head or as an arm pillow..
  • BAMBOO FABRIC & ANTI-SLIP DESIGN: Outer cover is made of breathable bamboo fabric. There are 2 - sided zippers of the liberator wedge pillow for easy removing and cleaning. The side of the bed wedges & body positioners is made of soft fleece material. The handle on the big back support pillows makes it easy to take in anywhere. Double anti-slip design of velcro strap and anti-slip points can reduce adjustments..
  • SOFT AND SUPPORTIVE MEMORY FOAM: All wedge pillows feature high density and better rebound memory foam, which can better fit your body curve and offer full support to your body so that reduces tossing and turning when you sleep. The memory foam wedge pillow wouldn't be flattened and keep its shape after long-term use..
  • PACKAGE CONTENTS AND SERVICES: With the purchase of the KINGFUN surgery wedge, you will receive 4 PCs pillows, a travel bag for storage, 2 vacuum bags for compressed and stored for space saving. We are offering a 100-night trial and 3 years warranty, if there are any problems during your use, feel free to contact us at any ti....
Check Stock

DaFuRui 10Pack SG90 Servo Micro Servo Motor, Mini 9G Servo Motor arduino Compatible for Arduino RC Robot Helicopter Airplane Boat Controls

  • ★Application Fields: Compatible with Remote Control Helicopters, Micro Robot, Robot Arm and Boats. Support All Kind of R/C Toys.
  • ★Interface Type: compatible with JR & Futaba interface.
  • ★Operating Speed: 0.12sec/60 degree(4.8V)~0.1sec/60 degree(6.0V).
  • ★Operating Voltage: 4.8V~6.0V,Amplifier Type: Analog Controller,Dead band width:5μs.
  • ★Package Content: 10 Pcs SG90 mini micro servo.
Check Stock

Ouwlam Arm Tool Lift Labor Saving Arm Jack, 2 Pcs Effort Elevator Hand Jack Lift Tool, Lever Arm Lifter, Load-Bearing 230Lb Labor-Saving Arm, Drywall Door Lifting Jack Tools, Silicone Gloves Hand Lift

  • 【Labor Saving Arm Jack -- Design】Designed According To Dynamic Mechanics, The Appearance Is Beautiful, Convenient And Practical, And The Saving Arm Jack. Hand Jack Allows A Lifting Capacity Of Up 120 Kg/330 Lbs, Operating Range : 5-115 (Mm). 2-17Cm Height Adjustment.
  • 【Labor Saving Arm Jack--Handheld Design】 Streamlined Handle Design, Handheld All Metal Handle, Strong And Durable, It Will Not Be Damaged Even When Working In A Low Temperature Environment. Improve Work Efficient And Control Accuracy,Save Time And Money..
  • 【Labor Saving Arm Jack---Good Helper For Carrying Heavy 330Lb】High Quality Hardened Stainless Steel, Durable And Rust-Proof. A Single Labor-Saving Arm Can Bear A Weight Of 330Lb. The Height Can Be Adjusted Freely To Prevent From Sliding.
  • 【Labor Saving Arm Jack--Strong Spring】 Strong Toughness Spring, It Can Help You Hold Up Objects To Prevent Falling. Lifting Plate Up To 2 Cm In Length, Maintain A Balanced State For A Long Time, Effectively Improve Productivity, And Make Work Easier. Widely Used Door Panel Lifting, Flooring, Board, Window, Cabinet, Hvac, Deck Installation,Wall Adjustment.
  • 【Labor Saving Arm Jack---Innovative Universal Tool】 The Warranty Period Is Up To 2 Years. If There Is A Quality Problem During Use, Pr....
Check Stock