Top Oil Filter Adaptor Fitting Reviews

Soda Blaster, Oil Water Separator, Digital Air Regulator

Achieve reliable and safe sandblasting operation with gravity-feed sandblaster gun. With an oil water separator and swivel connector, this bundle is is sure to complement any workspace..
The AS118 Soda Blaster gives you a clean finish that's fast and easy. This powerful blaster removes paint, rust, grease, and much more. Use it on cars, trucks, farm equipment and tools - or simply give your grill a good cleaning. Steel Nozzle Allows Precise Blasting- With a range of 90-150 PSI..
Filter oil, water and dirt from the air line with ZN312E-3 1/4" Water Separator air compressor filter, featuring color changing desiccant to notify you when it's time to change out the desiccant beads..
Quickly and Accurately Adjust air flow with the LE LEMATEC Air Pressure Regulator with an easy to read display for faster adjustments. The DAR01B gives you both and a replaceable battery so you never have to replace the regulator..
Installation: To connect the sandblaster, oil water separator and air regulator, use a male-to-male adaptor (not included and sold separately) from our Le Lematec LE-CU15K Air Fittings kit..

Check Stock

Class A Customs | T-1000-BPK| 10 Gallon Fresh Water Tank & Plumbing Kit RV Concession

...ng use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Class A Customs | T-2100-BPK| 21 Gallon Fresh Water Tank & Plumbing Kit RV Concession

...ng use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Class A Customs | T-4000-BPK| 40 Gallon Fresh Water Tank & Plumbing Kit RV Concession

...ng use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Class A Customs | T-3000-BPK| 30 Gallon Fresh Water Tank & Plumbing Kit RV Concession

...ng use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Class A Customs | Under Mount 20 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit UM-2000-BPK

...ng use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES - (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Class A Customs | Under Mount 30 Gallon RV Concession Fresh and Gray Water Holding Tank & Plumbing Kit | UM-3000-BPK

...ing use. DO NOT make a sealed connection with a garden hose directly to tank, this is a pressurized connection and will cause tank to explode causing damage. For filling tank it is recommended to use a fill dish or other gravity process..
BASIC PLUMBING KIT INCLUDES: (TWO) 0.5” Hose Barb to 0.5” Male Pipe Thread Adaptor (FOUR) 0.5” Hose Clamp (ONE) 1.25” Hose Barb to 1.5” Male Pipe Thread Adaptor (TWO) 1.5” Hose Clamps (ONE) 1.5” Male Pipe Thread PVC Male Adaptor (ONE) 5ft. Section of 0.5” ID Vent/Draw Hose (ONE) 5ft. Section of 1.25” ID (1.375” OD) Fill Hose.

Check Stock

Cen-Tec Systems 94225 Shop Vacuum 20 Ft Whip Hose and Power Tool Adapter Set for Dust Collection, Black

Features a 1. 25” X 20 foot commercial grade vacuum hose with 2. 5” connector for all major brands of home shop vacuums and a 360 degree swivel adaptor, accepting industry standard 1. 25” accessory tools. The highly flexible vacuum hose has a smooth interior to prevent clogs and get the most performance available from the vacuum.
Includes a 1. 0” X 10 foot crushproof whip hose which can be connected to the vacuum hose and then connected to power tools using the provided soft molded TPE tool adaptors. The 1. 0” diameter light weight whip hose allows for free movement of the power tool without kinking and allowing for dust collection from all major brands of power tools equipped for dust recovery during use. By simply threading off the swivel adaptor and threading on the hose end of the whip hose you have a power tool dust recovery solution for working up to 20 feet from the vacuum.
The soft 1” TPE adaptor is used for mating the hose with all major brands of power tools and power tool shrouds equipped for dust recovery during the use of the power tool.
The 1. 0” interior diameter adaptor press fits on the end of....

Check Stock

Astromania 1.25\ Multiple 5-Position Filter Wheel for Telescope

...r astrophotography pursuits. Included 5-Position 1.25" Filter Wheel lets you install all filters and then dial-in the 1.25" filter you want to use for a particular astrophotographic exposure. The filters can be changed very quickly at any time..
The robustly constructed filter wheel is supplied with a 1.25" eyepiece adaptor, 1.25" focuser nosepiece, T-2 camera adaptor and locking ring. The filter wheel can be attached to your focuser either by the supplied 1.25" nosepiece adaptor or via a T-thread. It is ideally suitable for visual observations with 1.25" eyepieces. and with the included T2 adapter it is also perfectly suitable for astrophotography with single lens reflex cameras and CCD cameras..
Keep in mind that use of the Multiple Filter Wheel requires 20mm of inward focus travel. This will not be a problem for most telescope designs, but could be a problem for Newtonian reflectors. The included T2 adapter comes with a locking ring, whereby high-precision distance regulation becomes possible.Its very sturdy aluminum housing makes it also suitable for heavy cameras..
Use: The Astromania Multiple Filter Wheel features a helpful number system that allows you to quickly place the filter of your choice into the light path. Simply note the reference ....

Check Stock

GlowShift Gauge Package Compatible with Subaru Impreza WRX STI 2002-2007 - Tinted 7 Color 30 PSI Boost/Vacuum 100 PSI Oil Pressure & Oil Temperature Gauges - Black Triple Pillar Pod

GlowShift Gauge Package for 2002-2007 Subaru Impreza WRX STI with a Black Triple Pillar Gauge Pod, 3 Tinted 7 Color Series Gauges, Oil Filter Sandwich....
Includes 30 PSI Boost/Vacuum Gauge with 6’ Silicone Hose & T-Fitting - 100 PSI Oil Pressure Gauge with 1/8-27 NPT Sensor & 9' Sensor Harness - 300 F....
Black Triple Pillar Gauge Pod for 2002-2007 Subaru Impreza WRX STI Mounts 3 Gauges to the Vehicle's A-Pillar - Overlay Design Mounts Pod on Top of the....
Oil Filter Sandwich Adapter with 20mm 1.5 Thread Installs Both Oil Pressure & Oil Temperature Sensors to the Vehicle's Oil Filter - 3 Gauge....
GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

Check Stock

10 Foot Long Dust Collection Power Tool Hose Kit for Multiple Types/Brands of Power Tools and Work Shop Vacuums with Threaded Fittings

...th popular tools like the K4 and the K5 Pocket Hole Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage.
The large thread-on rubber fitting has a 1-1/2 inch I.D. with a 1-13/16 inch O.D. which works on many other power tools. The rigid plastic vacuum Plug-in Adaptor has a 2-1/4 inch taper up to 2-5/16 inch O.D. The adaptor is designed to plug into most standard workshop vacuum ports. The Plug-in Adaptor conveniently threads onto the power tool hose so it will never slip off!.
Included inside the box: 1 each ten foot long 1-3/16 inch O.D. small diameter flexible hose, 1 each small flexible rubber thread-on fitting, 1 each large flexible rubber thread-on fitting and 1 each Plug-in Adaptor shop vacuum that will allow you to connect the hose to most commercial or residential workshop vacuum ports..
IMPORTANT! CHECK YOUR POWER TOOL PORT DIMENSIONS: Before placing an order, please check the inner and outer (I.D. and O.D.) diameter of your workshop vacuum ports and power tool ports to make sure the hose and fittings will properly fit and work for your needs. THE I.D. AND O.D. ON THE RUBBER END FITTINGS AND HOSE ARE APPROXIMATE SIZES AND MAY SLIGHTLY VARY..

Check Stock

GlowShift Gauge Package Compatible with Subaru Impreza WRX STI 2002-2007 - Tinted 7 Color 30 PSI Boost/Vacuum 100 PSI Oil Pressure & 300 F Oil Temp Gauges - Clock Replacement Triple Dashboard Pod

GlowShift Gauge Package for 2002-2007 Subaru Impreza WRX with a Black Triple Dashboard Pod, 3 Tinted 7 Color Series Gauges, Oil Filter Sandwich....
Includes 30 PSI Boost/Vacuum Gauge with 6’ Silicone Hose & T-Fitting - 100 PSI Oil Pressure Gauge with 1/8-27 NPT Sensor & 9' Sensor Harness - 300 F....
Black Dashboard Gauge Pod Replaces the Factory Clock & Mounts in its Position- Manufactured from ABS Plastic - Includes Mounting Hardware &....
Oil Filter Sandwich Adapter with 20mm 1.5 Thread Installs Both Oil Pressure & Oil Temperature Sensors to the Vehicle's Oil Filter - Add-On Clock Power....
GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

Check Stock

10 Foot Long Dust Collection Power Tool Hose Kit with 6 Threaded Fittings/Attachments for Multiple Types/Brands of Power Tools and Work Shop Vacuums

...th popular tools like the K4 and the K5 Pocket Hole Jig. Using this hose with your tools will keep your shop cleaner and can be quickly coiled up for easy storage.
The large thread-on rubber fitting has a 1-1/2 inch I.D. with a 1-13/16 inch O.D. which works on many other power tools. The rigid plastic vacuum Plug-in Adaptor has a 2-1/4 inch taper up to 2-5/16 inch O.D. The adaptor is designed to plug into most standard workshop vacuum ports. The Plug-in Adaptor conveniently threads onto the power tool hose so it will never slip off!.
Included inside the box: 1 each ten foot long 1-3/16 inch O.D. small diameter flexible hose, 2 each small flexible rubber thread-on fitting, 2 each large flexible rubber thread-on fitting and 2 each Plug-in Adaptor shop vacuum that will allow you to connect the hose to most commercial or residential workshop vacuum ports..
IMPORTANT! CHECK YOUR POWER TOOL PORT DIMENSIONS: Before placing an order, please check the inner and outer (I.D. and O.D.) diameter of your workshop vacuum ports and power tool ports to make sure the hose and fittings will properly fit and work for your needs. THE I.D. AND O.D. ON THE RUBBER END FITTINGS AND HOSE ARE APPROXIMATE SIZES AND MAY SLIGHTLY VARY..

Check Stock