Top Offline Controller Reviews

SainSmart Genmtisu GRBL Controller Board for CNC Router Machine 3018-PROVer/ 3018-PROVer Mach3/ 3018-MX3

  • This controller board is compatible with Genmitsu CNC 3018-PROVer. If you have already had the Genmitsu CNC Router 3018-MX3/ 3018-PROVer Mach3, this controller board can help you turn Mach3 control to GRBL control..
  • Applicable Software: Grblcontrol (Candle), LaserGRBL, and other software that supports GRBL firmware, GRBL firmware version V1.1f..
  • USB interface communication, support 3-axis engraving, and laser module..
  • Input interface: X Y Z limit (HOME) interface, Z-axis tool return to zero, emergency stop switch interface, GRBL offline controller interface..
  • All control signals are isolated by optocoupler and have strong Anti-interference ability.
Check Stock

3 Axis 1.1f USB GRBL Control Board with Offline Working Remote Hand GRBL Controller LCD Screen for CNC Laser Engraving Milling Machine Wood Router

  • Name: GRBL 1.1F 3 Axis Control Board V3.4+Offline Controller.
  • Input voltage: 12-24VDC (recommend 24VDC).
  • Support stepper motor: 12V, maximum current of 2A or less is recommended within 1.5A and additional heat. (Any stepper motor 42, 57).
  • Support spindle:24V 2A Support Spindle PWM speed (0%-100%).
  • Offline Control support SD card and tf card at the same time, standard capacity 1G, (notebooks generally have SD card interface, copy files are very convenient).
Check Stock

Genmitsu 3 Axis GRBL 1.1h 32-Bit CNC Controller Board for CNC Router Machine 3018-PROVer V2

  • This controller board is compatible with Genmitsu CNC 3018-PROVer V2 CNC Machine..
  • Applicable Software: Grblcontrol (Candle), LaserGRBL, and other software that supports GRBL firmware, GRBL firmware version V1.1h..
  • USB interface communication, support 3-axis engraving, and laser module..
  • Functional Input Interface: Includes X, Y, Z limit switches, Z-Axis tool setting touch probe, emergency stop switch, GRBL offline controller, MPG, 3 pin laser and air assistance pump..
  • All control signals are isolated by optocoupler and have strong Anti-interference ability. The outer ABS case could protect the control board well..
Check Stock

MYSWEETY CNC 3018Pro-M Engraver Machine Kit, GRBL Control 3 Axis Mini DIY CNC Router Kit, Plastic Acrylic PCB PVC Wood Milling Engraving Machine, with Offline Controller and ER11 and 5mm Extension Rod

  • ⚒️【2-IN-1 CNC 3018 Pro-M】- CNC 3018pro-M DIY Mini CNC Machine features two 5mm acrylic baffles on each side of the machine so that you can safely monitor the engraving process. A great tool for entrance CNC. Able to curved text on daily materials easily. Great for those who are interested in CNC, helping you engrave the model efficiently..
  • ⚒️【Offline Controller】- The offline controller is 1G Capacity.You can control the CNC router without connecting to the computer. The CNC router can be placed wherever you want, such as garage and workshop..
  • ⚒️【New Control Board】- Integrated Driver Chip + Fixed Heat Sink + External Fan + Sturdy Casing to extend the life of the control board, Self-contained short circuit protection, Not easy to damage. 12 Months Warranty..
  • ⚒️【Versatile】- It can work on wood, bamboo, paper, leather, plastic, PCB, acrylic, metal surface paint, metal surface plating etc. It can not work on hard metal, iron, glass, 201/304 stainless steel, jewelry or silver, and other hard things.It is recommended to engrave 0.1-0.3mm each time..
  • ⚒️【Simple Assembly】- Assembly instructions are provided, but if you get stuck, contact us with any questions that arise. Thank you!.
Check Stock

Street Fighter Anniversary Collection

  • Analog Controller, Vibration Memory Card - 214 KB.
Check Stock

RATTMMOTOR CNC 1610 PRO CNC Wood Router Machine Kit, 3 Axis GRBL Control DIY Mini CNC Milling Engraver Engraving Machine with CNC Offline Controller for Plastic/Wood/Acrylic/PVC/PCB/Wood

  • ...blcontrol/Candle software after connecting the control board to a coumpter via USB port. The control board is equipped with a fan to force heat dissipation, also has more fuctions such as support spindle PWM speed, limit switch, tool setting, steering gear..
  • 【CNC Offline Controller】This machine can be controlled simply by the offline controller without connecting it to a computer. Support SD card and TF card at the same time, standard capacity 1G. After inserting the file into the SD card,the engraving file can be directly identified..
Check Stock

CNCTOPBAOS Upgrade CNC 3018 Pro 3 Axis DIY Mini CNC Router Kit with GRBL Remote Control Offline Controller PVC PCB Acrylic Plastic Wood Cutting Engraving Carving Milling Machine

  • ♞【Upgrade Version 3018 Pro with Offline Controller】Mini CNC machine small size, light weight, USB interface, GRBL control systems, great cnc router machine for beginers.
  • you can operate this machine without connect the computer.
  • offline controller included a SD card reader to write into the root directory G-code files or NC file.
  • Support manually adjust X, Y, Z axis location as engraving starting point,manually open or close spindle..
  • ♞【Main Feature】 Working area:30x18x4.5cm.
  • Type: USB Port Desktop cnc router/Spindle: 775 spindle motor (12-36V) 24V:10000rpm/ Stepper Motor: Nema17 stepper motor,1.3A, phase resistance 2.1 ohms, torque 0.25N.m.
  • ♞【Upgraded GRBL1.1 Control Board】Added the outer casing,emergency stop button port,tool setting (probe) port,X/Y/Z axis limit port and add the power button switch,and come with the fan port to force heat dissipation,with enhanced spindle drive,can support maximum 20000rpm spindle,and also can support 0.5W-20W module..
  • ♞【Main application】Can be engraved plastic, wood, acrylic, pvc, pcb, wood and the like material.soft metal like copp....
Check Stock

4 Axis 500KHz Offline Stand Alone CNC Controller Motion Controller System PLC Control G Code for CNC Router Engraving Milling Machine/Stepper/Servo Motor RMHV3.1

  • Controller name:4 axis CNC Offline Controller 4 Axis 500Khz G Code Breadout Board Engraving Machine Control System Card.
  • 4.3 inches TFT screen, resolution ratio: 480*272.
  • Support the USB flash disk to read the G code,and the size of G codefile has no requirement.
Check Stock

Smart Sprinkler Controller WiFi 6 Zones, INKBIRD IIC-600-WIFI Irrigation Controller, 6 Stations, Supports Rain Sensor, Seasonal Adjustment, Automatic/ Manual Watering

  • WiFi Remote: IIC-600-WIFI smart sprinkler controller has a built-in 2.4G WiFi module. You can set the watering schedule and monitor the watering process on INKBIRD app. APP compatibility--iOS 11.0+ and Android 5.0+. Note: If your router is a dual-band router, please independently enable the 2.4GHz WiFi band and name it differently from the 5GHz WiFi band..
  • Non-volatile Memory: Non-volatile memory is embedded in the sprinkler controller, which could indefinitely save all settings even after a long time of power off. Therefore, you could always count on it to implement watering on schedules..
  • 4 Cyclic Options & 6 Start Times: There are 4 options when determining how often the irrigation system controller will water-- days of the week (Mon, Tues, Wed, etc.), intervals (every “X” number of days), and odd days, or even days. You could separately program a watering schedule for each zone.Each zone can has 6 start times..
  • Home management & Notification:INKBIRD APP allows to add family members and share the sprinkler management. Whenever the sprinkler controller is offline or the watering complete, you will receive a notification on the phone to deal with it in time..
  • Rain Sensor & Seasonal Adjust: This irrigation controller supports rain sensor, making it c....
Check Stock

4 Axis 500KHz Linkage Offline Motion Controller System PLC Control G code+100 Pulse Handwheel MPG with Emergency Stop for CNC Router Engraving Milling Lathe Machine RMHV3.1

  • Controller name:4 axis CNC Offline Controller 4 Axis 500Khz G Code Breadout Board Engraving Machine Control System Card.
  • 4.3 inches TFT screen, resolution ratio: 480*272.
  • Support the USB flash disk to read the G code,and the size of G codefile has no....
Check Stock

4 Axis CNC Controller System DDCS V2.1 Offline Stand Alone PLC 500KHz USB Motion Controller Replace Mach3 G Code for CNC Router Engraving Milling Machine/Stepper/Servo Motor Drive Control

  • 4.3 inches TFT screen, resolution ratio: 480*272.
  • Controller name:4 axis CNC Offline Controller 4 Axis 500Khz G Code Breadout Board Engraving Machine Control System Card.
  • The main control equipment is 24V-32V/DC power input, the current capacity is required not to be lower than 0.5A.
  • Support the USB flash disk to read the G code,and the size of G codefile has no requirement.
Check Stock

Diablo Eternal Collection (Nintendo Switch)

  • 7 unique and powerful hero classes: Barbarian, Crusader, Demon Hunter, Monk, Necromancer, Witch Doctor, and Wizard.
  • Explore the full story of Diablo III across the High Heavens and Burning Hells through 5 thrilling Acts.
  • Open the world of Sanctuary to endless exploration with Adventure Mode, featuring loot-packed Bounties and Rifts.
  • Fully supported Seasonal Updates bring additional exclusive rewards, challenges, and player leaderboards every few months.
  • Includes Switch-exclusive bonus cosmetics, featuring a full intimidating armor transmog set befit for the King of All Evil, Ganondorf.Play with up to 4 friends online, offline via local coop, or on a single console couch-coop style.Supports all Switch controller configurations, including single and dual Joy-Con action.
Check Stock

Cenoz Upgrade CNC 3018 Pro GRBL Control DIY CNC Machine,3 Axis PCB PVC Milling Engraving Machine,Wood Router Engraver XYZ Working Area 300x180x45mm (3018-PRO with extension rod)

  • The latest control board : in order to meet most customers needs ,we upgrade the cnc milling machine , provide new version control board ,latest GRBL 3 axis control ,more power ,more precise , include Integrated Driver Chip + Fixed Heat Sink +External Fan +Sturdy ..
  • Quick assembly Version : All components of this 3018 pro cnc engraving machine no need to be positioned, which greatly reduces the time of assembly . It takes only about 20 minutes to complete assembly..
  • Intelligent software: GRBL three-axis control board can be use on Win xp/Win7/Win8/Linux system ,reduce more operational problems .can engrave on plastics, soft aluminum, woods, acrylics, PVC, and PCB..
  • Offline control way : Support offline controller , manually adjust X, Y, Z-axis without connecting to the computer and download files ,not only just a unique gift for your lover, familyfriends ,but also satisfy your desire to create handicrafts perfectly ..
  • Please download the manual via this link: https://shimom.s3.us-east-2.amazonaws.com/Cenoz/cenoz+3018pro.rar , any question welcome to contacting our professional team , we promise to solve your any issue in 24 hours ..
Check Stock