Top Non metallic Cable Clamp Reviews

COOLBROS Pen Pencil Holder with Phone Stand, Resin elephant Shaped Pen Container Cell Phone Stand Carving Brush Scissor Holder Desk Organizer Decoration for Office Desk Home Decorative (Retro Brown)

  • UNIVERSAL UNDER DESK DESIGN clamps on to desks up to 40mm thick and as narrow as 8mm for a near universal fit on most desks || Spring Clamp is easy to remove and reattach! Headphone Hook for birthday gifts.
  • ROTATING ADJUSTABLE HEADPHONE ARM swings underneath your desk for discreet & non-intrusive storage and swings back out for easy access..
  • BUILT IN CABLE LOOP holds your headset's cable in place to prevent it from dragging on the ground or getting caught between your desk chair's legs..
  • SOFT RUBBER PADS located on both clamp ends protect your desk or table from damage || Protects glass, woden & metal desks/tables from damage!.
  • Under Desk Mount for Convenient Storage. Springed C Clamp, Easy Installation..
Check Stock

Clamp Type Connector Cable Connector Clamp Cable Connector for Metallic Conduit Protect Cables Silver (4, 3/4 Inch)

  • Multi-quantity: there are 8 pieces cable connectors in the package, enough quantity to meet your replacement and using needs in daily work, better cooperate with you to finish work.
  • Durable material: wire connectors are made of zinc alloy material, not easy to rust, durable and practical, can be applied for a long time after heat treatment, and with the corrosion-resistant zinc die-cast structure.
  • Sturdy metal structure: cable connector kit has metal structure, which ensures mechanical protection of the raceway, protects your wires from damage, and prevents hazards of leakage, safe and sturdy.
  • Screw straps design: the 650XY2 clamp type connector has 2 pieces screw straps and flexible conduit FTGS.
  • It is the service entrance cable fittings but does not the metallic cable.
  • Cable size measures 14 awg, and the knockout is about 1/2 inches.
  • Size information: cable connector clamp is about 1/2 inches, before purchasing, pay attention to whether it meets your daily needs for work and cooperation, in order to prevent wrong purchase.
Check Stock

2 Pack 14 Ft Xtreme Control Cables Fits for Johnson, for BRP, CCX20514

  • Clamp Size(Each): 3.5 x 1.6 x 0.7cm/1.4"" x 0.6" x 0.28"(L*W*T).
Check Stock

SHELANDY Pet Dog Grooming Table arms Hair Dryer Holder Hands-Free Tool Holding Arms with Clamps

  • ① Gooseneck-style cable that can be positioned at any angle..
  • ② Stainless Steel flexible 34" cable equipped with full metal clamp..
  • ③ The clamp for table, Fits table 1cm-3cm in thickness..
  • ④ The fixture of the arm works with all size dryer..
  • ⑤ Not include the hand dryer. Only arm and clamp..
Check Stock

Neewer NW-800 Professional Studio Broadcasting Recording Condenser Microphone & NW-35 Adjustable Recording Microphone Suspension Scissor Arm Stand

  • This Kit Includes:(1)Condenser Microphone + (1)Adjustable Suspension Scissor Arm Stand + (1)Table Mounting Clamp + (1)Metal Shock Mount + (1)Ball-type Anti-wind Foam Cap + (1)3.5mm Male to XLR Female Cable. *PLEASE NOTE: Sound Card, 48V Phantom Power, 1/4" to XLR Cable & XLR to XLR Cable are needed to purchase additionally.*.
  • The professional condenser microphone adopts the completely new audio circuit. Capture rich, full-bodied sound from sources that are directly in front of the mic. The cardioid pick-up pattern minimizes background noise and isolates the main sound source..
  • The adjustable scissor arm stand is made out of all steel construction, sturdy and durable. Folding type, convenient to carry. Can be mounted on the announcers' table. The double-braced arms add strength. *Max load: Approx 35oz / 1KG*.
  • The table mounting clamp,a specially designed table mounting clamp for universal microphone suspension boom scissor arm stand..
  • The metal shock mount features an angle adjustment with locking knob and can effectively reduce handling noise. The ball-type anti-wind foam cap can protect microphone against wind interference and singers'spit..
Check Stock

J Bryant Gym Machine Accessories for 5mm Cable Ball Stopper Interface Port Components Fitness Equipment Wire Rope Port Joint Replacement Parts for Home Gym Machine Use

  • SIZE: The ball is 4cm diameter, with 1cm hole. The bowl-shape plate has a 38mm diameter, with 7mm hole. The metal eyelets terminal is used for cables with a diameter of 5mm and an internal steel wire diameter of about 3mm. The wire rope clamp is for a 5mm rope or cable..
  • DURABLE MATERIAL: The ball is made of high quality plastic, the bowl-shape plate is made of metal alloy. The eyelet terminal is made of metal alloy. The wire rope clamp and thimble are made of 304 stainless steel..
  • USE: Use a hydraulic crimper (plier) tool to link the cable with the metal eyelet terminal. The ball, bowl-shape plate and the terminal.
  • you can use as ball stopper set on cable machine. Put the wire rope thimble together with the clap and cable, it can use as clothesline or fence line, the thimble and clamps are wear-resistant..
  • You can choose the appropriate connector type according to the training equipment or sports environment, which is convenient and practical..
Check Stock

Lind Equipment RAC10 Retractable Heavy Duty Grounding Assembly, 10ft, 1/8\ Coiled Plated Steel Cable, Orange PVC Coated to 3/16\

  • Retractable grounding and bonding assembly for use in transferring flammable material.
  • Cast aluminum hand clamp and plated steel cable for conductivity.
  • Two hardened stainless steel points on the clamp for attachment to all metal surfaces and a 5/16" lug terminal for secure attachment to container or ground terminal.
  • 10' of coiled 1/8" cable with an orange PVC jacket for safety and visibility.
  • Clamp is FM approved for quality assurance.
Check Stock

Rockville PC Gaming Streaming Twitch Bundle RCM03 Microphone+Headphones+Boom Arm

  • Package Includes: (1) RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. (1) RockvilIe DMS40 40" Microphone Boom Arm Studio Podcast USB Mic Stand+Desk Clamp. (1) RockvilIe PRO-M50 Studio Headphones w/ Detachable Coil Cable, Case+Extra Ear Pad. RCM03 Condenser Microphone (made of aluminum!). 100% Copper 10 foot 3.5mm jack to XLR cable to connect mic to your computer or other device. 100% Copper 10 foot XLR to XLR cable to connect to any mixer with phantom power.
  • Metal shock mount. Metal Anti-wind foam cap. Owners Manual. Warranty card. Features: RockvilIe RCM03 Pro Studio Recording Condenser Microphone Mic+Metal Shock Mount. Aluminum high quality construction. Polar Pattern: Internally Polarized Condenser Cardioid Design. Large diaphragm for smooth, natural sound and low noise. Power Requirements: 48V DC phantom power or computer sound card (can connect to the phantom power channel of your mixer or can connect to your laptop or computer).
  • Uni-directional. Sensitivity: -27dB2dB(0dB=1V/Pa at1kHZ). Output impedance: 2000%(at 1kHz). Standard operating voltage: 3V. Operating voltage range: 1.5V-10V. Current consumption: less than 500uA. Voltage deduction characteristic: within 3dB at 2V. S/N ratio: More than 24dB. Frequency Resp....
Check Stock

Welder Machine Accessories 5 in 1 Stick Welding Electrode Holder 300A Assembly with 12ft Cable 10-25 Cowhide Gloves Mask Helmet Ground Clamp Hammer

  • ✅Package Content: Electrode holder with 12ft cable/ cowhide welding gloves large / simple mask / 300 amp ground clamp/ slag hammer.
  • ✅HIGH-QUALITY ground clamp:Made from qualified materials,the earth clamp has excellent clamping power and superior electrical connections. SUITABLE FOR:Stick welding, submerged arc welding, gas metal arc welding and gas tungsten arc welding applications..
  • ✅Cowhide Gloves:Carefully selected high-quality split cowhide is exceptionally durable and puncture resistant, protecting hands from the hard environment in a wide variety of tasks.
  • ✅300A Electrode holder with cable:300 Amp Welding Electrode Holder Lead Assembly - Dinse 10-25 Connector - #2 AWG cable (12 ft).
  • ✅5 IN 1:Multi-purpose household and welding repair tool kit.
Check Stock

uxcell 5A Alligator Clip Double Wire Battery Test Booster Jumper Cable 1.5M Long 2pcs

  • Package Content: 2pcs x Battery Booster Cables.
  • Clamp Size(Each): 4.7 x 3 x 0.8cm/1.85" x 1.2" x 0.31"(L*W*T).
Check Stock

S5-SR Heat Cable Clips for Standing Seam Metal Roofs 10 Pack Must be Used with S5 Clamps-Sold Separately

  • SPECIFICATIONS: Package includes (10) S5-SR clips.
  • DOES NOT WORK ALONE: The S5-SR clip MUST BE used with the S5! standing seam metal roof clamps, which are sold separately.
  • HEAT CABLE: Use with the popular S5! clamp to attach heat cable and heat tape to standing seam metal roofs (S5! sold separately)..
  • EASY INSTALLATION: Installation takes minutes, just attach the S5-SR to the S5! Clamp using the bolt included with the S5!..
Check Stock

Muzata Upgraded Multi Angle Drill Guide Fit 25 30 35 40 45 90 Degree Cable Railing Kit Stair Visible Template Jig 4 Sizes Guide Track for Straight and Angle Hole Wood Post CT19 CT1

  • Various drill bit sizes – This cable railing drill template guide jig offers 4 different sizes of guide tracks(fit 3/16”,9/32”, 5/16”,13/32” drill bits), compatible with most cable railing kit hardware. The hole drilled by 5/16″ drill fit most of 1/8″ cable railings lag screws. The fixing metal sleeve of the desired size can be replaced by adjusting the Jack bolt. The reserved gap between drill bit and metal sleeve can prevent the wear of drill bits and sleeves when drilling.
  • Visible and Portable – The drill guide is made of transparent acrylic with excellent visibility so it is easy and accurate to position on the decking wood post. It is portable and easy to carry. Recommend working with F clamp or C clamp for steadier and safer drilling. Note: Clamps are not included, please search F or C clamp and choose a size larger than 8 inches.
  • Pre-Designed System -We pre-designed a WoodHidden cable railing system to help you construct a hidden wood system, which includes cable railing kit CR26, angled beveled washer CR60, 1/8” wire rope WR02, adhesive sleeve CR66, protector sleeve CR13, drill guide CT19, crimper and cutter CT01, socket wrench CT16. Please note that the package only contains contents as specified in bullet point ....
Check Stock

ARES 78005 – Precision Adjustment Hose Clamp Plier - 24-Inch Heavy Duty Cable Flexes for Use in Any Position - Works on 18mm-54mm Hose Clamps – Micro Adjustment Feature Maintains Tension on Hose Clamp

  • INCLUDES: The ARES Precision Adjustment Hose Clamp Plier allows you to remove plastic and/or metal self-tightening hose clamps with diameters of 11/16-inch to 2-1/2-inch (18mm to 54mm)..
  • DESIGN: The precision clamp on the end of the flexible cable allows for extended reach where other models cannot reach, and the heavy-duty 24-inch cable allows for use in any position. The pliers feature a locking mechanism that holds the clamp open to easily replace clamps, as well as a release lever with red PVC dipping for style and ease of use. The micro adjustment feature allows you to adjust the tension on the cable, ensuring the clamp has the proper force and range to fully clamp down..
  • APPLICATIONS: The long reach of these pliers allows you to work in confined and tight spaces at any angle, allowing you to get into those tight spaces and get the job done with ease. This plier also features a threaded micro adjustment feature, allowing for precision tension adjustment that provides an accurate lock on all clamp sizes within the diameter range..
  • RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools that make an i....
Check Stock