Top Multimode Optical Switch Single Reviews

Primeda-tronic 8 Channel Analog Video Over Fiber Optic Converters with RS-485 Data,ST Fiber Connector, Single Mutlimode Fiber up to 0.93Miles (1.5Km), A Pair

  • This video over fiber optic is used to send 8 channels of analog video signals through one optical cable to remote display devices. Optical interface: ST..
  • Suitable fiber type: universal multimode fiber. Long transmission distance up to 1500m(0.93 miles) by a multimode fiber. With RS-485 data (reverse direction) for remote control PTZ..
  • Applicable for Analog cameras, Compatible for PAL, NTSC, SECAM Video format automatically . Note: Not support 1080P/960P/720P TVI/CVI/AHD HD Cameras and SDI camera..
  • LED indicators can dynamic feedback link connection state and fault detection to easily monitor network status..
  • Plug and Play, High Quality and Stable, Cost effective, Greatly save your engineering cabling cost..
Check Stock

FiberCablesDirect - 3M OM2 LC SC Fiber Patch Cable | 1Gb Duplex 50/125 LC to SC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1gb 10gb mmf upc sfp+ 1gbase mmd dplx pvc ofnr om2-lc-sc

  • Fiber Cable Description: OM2 LC to SC Fiber Patch Cable 3 Meter | 1Gig Duplex LC SC Multimode Fiber (MMF) Patch Cable, Corning 50/125um core/cladding, 1.25 ceramic ferrule LC connectors and 2.5mm ceramic ferrule SC connectors for reliable, high speed, low loss, data transmission. Orange, OFNR, 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0 mm, Outer Diameter, Zip-Cord Reinforced, LC to SC Terminated, Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-mil....
Check Stock

FiberCablesDirect - 1M OM1 LC LC Fiber Patch Cable | 1Gb Duplex 62.5/125 LC to LC Multimode Jumper 1 Meter (3.28ft) | Length Options: 0.5M - 300M | 1gb 10gb mmf lc-upc sfp 1gbase mmd dx pvc ofnr lc-lc

  • Fiber Cable Description: OM1 LC to LC Fiber Patch Cable 1 Meter | 1Gig Duplex LC LC Multimode Fiber (MMF) Patch Cable, Corning 62.5/125um core/cladding, 1.25mm ceramic ferrule LC connectors. Reliable, high speed, low loss, data transmission. Orange, OFNR, 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 1 Meter (3.28 feet), Duplex (2 fiber strands), 2.0mm Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -25 dB), Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron....
Check Stock

6 Pcs Fiber Optical Tool Accessory Fiber Sleeve Core Spare Ceramic Inserts and Mental Heads for Visual Fault Locator Fiber Cable Tester

  • It is suitable for connecting home butterfly cable.
  • Using V groove butt joint technology mature, applicable to the multimode optical fiber connection.
  • Free offixture design, operation time less than a minute.
  • For fiber optic butting optical fiber or optical fiber butt pigtail, this is to do joint,.
  • (butting optical fiber pigtail pigtail fiber core refers to head butt fiber and pigtail instead of the former said), for the cold connection thing called optical fiber cold sub..
Check Stock

CreativeKIT GLC-SX-MM,1.25G SFP 1000Base-SX, 850nm MMF, 550m DDM Transceiver for Cisco Meraki Ubiquiti and Other Open Switches

  • Overview--1.25 Gb/s 1000Base-SX Ethernet, 850-nm, Duplex LC connector, up to 550 meters. Temperature Range--0 to 70°C，Output Power: -8.2~-1dBm，Receiver Sensivity: -11.5dBm，Interface: LC.
  • Compatible Type: GLC-SX-MM ,GLC-SX-MMD/GLCSX-MM/SFP-GE-S, Meraki MA-SFP-1GB-SX, Ubiquiti UF-MM-1G, Mikrotik S-85DLC05D.
  • Stable Transmission -- This 1000BASE-SX SFP supports 550m stable link lengths over Dual LC OM3 multi-mode (MMF) fiber. Each SFP transceiver module is individually tested to be used on 1G switches, routers, servers, NICs, media converter and other transmission equipment that support SFP modules..
  • Wide Compatibility -- for Cisco, Meraki, Ubiquiti, Mikrotik, D-Link, Supermicro, TP-Link, Broadcom, Linksys and Other Open Switches..
  • You will get: 1 PCS 1.25G multimode optical module + 1 PCS OM3 3-meters multimode dual fiber optical fiber (The fiber is easy to break, please do not bend).
Check Stock

FiberCablesDirect - 3M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 10/40/100gb mmf sfp+ 100gbase dplx ofnr om4-lc-lc

  • Fiber Cable Description: OM4 LC LC Fiber Patch Cable 3M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord..
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR4) |....
Check Stock

FiberCablesDirect - 3M OM3 LC LC Fiber Patch Cable | 10Gb Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 1g 10g 40g lc-lc dplx mmf 10gbase sfp+ Aqua ofnr lommf

  • Fiber Cable Description: OM3 LC LC Fiber Patch Cable 3M | 10Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), 1/10/40Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord..
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM3 Ethernet Over Multimode Fiber: 1500 / 2000 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 300m | 40Gb Ethernet 40GBase-SR4 100m (330m QSFP+ eSR4) | 100G....
Check Stock

FiberCablesDirect - 2.5M OM4 LC LC Fiber Patch Cable | 100Gb Duplex 50/125 LC to LC Multimode Jumper 2.5 Meter (8.20ft) | Length Options: 0.5M-300M | 10/40/100gb mmf sfp+ 100gbase dplx ofnr om4-lc-lc

  • Fiber Cable Description: OM4 LC LC Fiber Patch Cable 2.5M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries..
  • Fiber Patch Cable Details: 2.5 Meter (8.20 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord..
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | 40Gb Ethernet 40GBase-SR4 150m (550m QSFP+ eSR....
Check Stock

FiberCablesDirect - 3M OM4 LC LC Fiber Patch Cable | Bend Insensitive Plenum 100Gb Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M-300M | 10/40/100g mmf lc-lc om4-lc-lc

  • Fiber Cable Description: OM4 LC LC Bend Insensitive Plenum Fiber Patch Cable 3M | 100Gig, Corning, Laser Optimized Multimode Fiber (LOMMF), 50/125 optical fiber core/cladding. Aqua, 2.0mm outer diameter, zip-cord reinforced, jumper. Used in educational, corporate, military/defense, government, healthcare, finance and commercial industries..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), 1/10/40/100Gb Multimode, Zip-Cord Reinforced, Bend Insensitive, Plenum, Duplex (2 Fiber Strands), 1.25mm ceramic ferrule, LC-UPC to LC-UPC, Fiber Patch Cable/Jumper Cord..
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM4 Ethernet Over Multimode Fiber: 3500 / 4700 MHz-km Modal Bandwidth 850nm / 1300nm | Fast Ethernet 100Basw-FX 2000m | 1Gb (1000Mb) Ethernet 1000Base-SX 550m (Requires mode-conditioning patch cord) | 10Gb Ethernet 10GBase-SR 400m | ....
Check Stock

FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves for SUMITOMO with 36000 Cleaves and Coating Diameter: 250μm - 900μm 12 Position Blade Cold Connection Tools Fiber Equipment Used in FTTH

  • FC-6S Optical Fiber Cleaver Stripping Cutter Tool Cleaves Used in FTTH, Applicable fibers: Single-Mode or Multimode Silica optical fiber.★ Cold Connection Tool Equipment Bare fiber diameter:125um,Coating diameter:250-900um.
  • Cleaving angle: 0.5-0.8 degrees with single fiber..
  • Replicable Blade: Contained 16 Position Rotatable blades, Blade life: Provides approximately 48000 times (100*16*3) cleaves.★ Durability & Compact body: High hardness aluminum alloy materials, Lightweight and rugged design for longer life and increased durability..
  • Scientific Design: The fiber cleaver Built-In Fiber Holder can hold 250μm and 900μm fiber with a readable scale for accurate cleave lengths from 5 to 20mm and also has a built-in trash can for easy disposal..
  • High Precise Cleaving: Provides a cleave with a cutting angle of less than 0.5°for optimal fiber preparation for fusion splicing, Coating Diameter: 250um ~ 900um buffer fiber. Large & small adjustable knife, easy to operate. Non-slip bottom,easy to use..
  • Wide Application: Ideal for field splicing applications, splicing trucks, laboratories, fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice..
Check Stock

FiberCablesDirect - 3M OM2 LC LC Fiber Patch Cable | 1Gb Duplex 50/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M - 300M | 1gb 10gb mmf lcupc sfp 1gbase mmd dx PVC ofnr lc-lc

  • Fiber Cable Description: OM2 LC to LC Fiber Patch Cable 3 Meter | 1Gig Duplex LC LC Multimode Fiber (MMF) Patch Cable, Corning 50/125um core/cladding, 1.25 ceramic ferrule LC connectors for reliable, high speed, low loss, data transmission. Orange, OFNR, 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0 mm, Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated, Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 50µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM2 Ethernet Over Multimode Fiber: 500/500 MHz-km @850/1300 nm (OM2 – Laser-rated for GbE LANs) | 1Gb Ethernet Distance is 550 Meters at 850/1300 nm ....
Check Stock

FiberCablesDirect - 3M OM1 LC LC Fiber Patch Cable | 1Gb Duplex 62.5/125 LC to LC Multimode Jumper 3 Meter (9.84ft) | Length Options: 0.5M - 300M | 1gb 10gb lc-lc mmf lc-upc sfp 1gbase mmd dx pvc ofnr

  • Fiber Cable Description: OM1 LC to LC Fiber Patch Cable 3 Meter | 1Gig Duplex LC LC Multimode Fiber (MMF) Patch Cable, Corning 62.5/125um core/cladding, 1.25mm ceramic ferrule LC connectors. Reliable, high speed, low loss, data transmission. Orange, OFNR, 2.0mm outer diameter, zip-cord reinforced, PVC jacket. | Education, Corporate, Military/Defense, Government, Healthcare, Finance and General Commercial, Computer Networking Applications..
  • Fiber Patch Cable Details: 3 Meter (9.84 feet), Duplex (2 fiber strands), 2.0mm Outer Diameter, Zip-Cord Reinforced, LC to LC Terminated (Max Connector Loss: 0.50 dB, Typical Connector Loss: 0.30 dB, Typical Return Loss -25 dB), Multimode Fiber (MMF) Optical Patch Cable / Jumper Cord..
  • Core / Cladding: Corning 62.5µm (micron) diameter fiber core / 125µm diameter cladding (1 micron is 1 one-millionth/1 meter). The fiber optic core is surrounded by a transparent, low refraction, cladding material. Light is contained within the fiber core (total internal reflection) causing the fiber within the patch cord assembly to act as a wave-guide. Light travels through the fiber bouncing off the boundary between core & cladding..
  • Optical Modality Details for OM1 Ethernet Over Multimode Fiber: 1Gb Ethernet Distance of 300....
Check Stock

10 Gigabit Fiber to 10G Copper UTP Ethernet Media Converter - Open SFP+ 10Gb Slot - 10G Base-T to 10G Base-R - Cat7 UTP 1m Cable in Set - 10 Gbps Gbit Fiber Optic Converter

  • 10G Base-R (Open SFP+ 10G slot) to 10G Base-T UTP Copper RJ-45 port Fiber Media Converter.
  • Convert & Extend Copper Distance of Your High Speed 10gbps network connect far beyond – your SFP+ fiber transceiver distance is the only limit now.
  • Supports any SFP+ 10G transceiver of your choice, be it Single or Multimode, or even WDM single optical fiber type – it’s pure Open SFP+ slot.
  • Important!: 10G base-T RJ-45 UTP port will autoadapt (autosense) to 1000Base-T, 2.5G Base-T, 5G Base-T and 10G Base-T connection at user side, but....
  • You Get Free 1m (3.28 ft.) UTP Cat7 (10G Network Ready) UTP RJ-45 patchcord in set with every 10G Media Converter!.
Check Stock