Top Motor Shaft Reviews

HVAC Motor 1/100 HP 3000 RPM 120V 3.3

  • Price For: Each Body Dia.: 3.3" Motor Shaft Design: Flat Motor Service Factor: 1.00 Frame: 3.3 Motor Bearings: Sleeve Phase: 1 Max. Ambient Temp.: 40....
  • Duty: Continuous Mounting Pattern: 2-7/8 x 2-7/8 RPM Range: 1801-3000 Voltage: 120 Voltage Compatibility: 115, 120 Shaft Length: 3-1/2" Mounting Stud....
  • Length Less Shaft: 2-7/16" Shaft Dia.: 1/4" Country of Origin (subject to change): Mexico.
Check Stock

Flex Shaft 6mm Shank,Metal Flexible Shaft for Wood Carving Knife Chise Grinder Tool with Hex Wrench,100mm/3.93 Inch(Length)

  • FOREDOM FLEXSHAFT SET MOTOR MAINTENANCE KIT S-93 INNER SHAFT & S-77 OUTER SHEATH.
  • FOREDOM FLEX SHAFT MOTOR PARTS INNER SHAFT & OUTER SHEATH FOREDOM "Original" PARTS - SET OF REPLACEMENT PARTS These are original Foredom Flex Shaft replacement parts, used for the maintenance of your Flex Shaft Motor. Sale is for the set inner and outer replacement parts. The Outer Sheath measures 36-1/4" long, standard material outer sheath comes equipped on most of the standard models. FOREDOM Item Number: S-77 NOVELTOOLS # 0616-77 The Inner Shaft Cable the standard KEY TIP SHAFT, a 39" long inner shaft is used to replace broken or worn shafts. FOREDOM Part Number S-93 NOVELTOOLS # 0616-93 NOTE: Shaft should be greased when replacing part. Please see our store for 1oz Tube of Grease..
Check Stock

AMRA-37180 AFI 1000 Waterproof Wiper Motor w/ 2.5\ Shaft - 80 Degree

  • The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
  • This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
  • Specifications: 12V. .625" diameter shaft. 2.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
  • Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
  • Coast to park with adjustable right or left self parking. RF shielded circuitry.
Check Stock

AMRA-36180 * AFI 1000 Waterproof Wiper Motor w/ 1.5\ Shaft - 80 Degree

  • The AFI 1000 Waterproof Wiper Motor is a heavy-duty wiper motor capable of powering 18" deluxe arm and 18" deluxe combination at sweep sets of 80 degrees or less..
  • This motor features a fully sealed waterproof housing made of UV stabilized, high-temperature, high-impact thermoplastic..
  • Specifications: 12V. .625" diameter shaft. 1.5" Shaft length. Stall torque: 55 in-lbs. Stall current: 9.8-10.0 amps. No load current: 0.8-1.2 amps. 6.625" L x 3.375" W x 2" D.
  • Heavy-duty motor with anti-rotation drive shaft. Knurled drive shaft and solid brass arm drive nut.
  • Coast to park with adjustable right or left self parking. RF shielded circuitry.
Check Stock

RC Drive Shaft, 4Pcs CVD Front Rear Drive Shaft Metal Transmission Axle Compatible with Traxxas Slash 4X4 1/10 RC Car(Titanium)

  • 【Parameters】- Connect to motor shaft: 3.18mm/0.12".
  • 【High Quality Material】- Stainless steel, rc boat motor coupler is the high quality replacement part..
  • 【Feature】- This stainless steel flex coupler(with grub screw) is for round end cable,fit for 3.18mm/0.12" motor shaft and 4mm/0.16" flex shaft..
  • 【Application】- The flex shaft collet is compatible with DIY RC model, such as RC boat toy, RC submarine and so on..
Check Stock

COLIBROX AS-4FS 1/2 Motor Arbor to 1/2 Threaded Shaft Adapter

  • Converts electric motor to Grinder or Buffing machine.
  • Fits 1/2" Motor Shafts,Converts 1/2" motor shaft to 1/2" Threaded shaft,Wheel Widths Up To 1 1/16 in.
  • Lock on to motor shaft with 2 hex set screws,1/2"-20 Right Hand thread.
  • Holds Grinding wheels, Wire wheels or Buffing wheels with 1/2" hole.
Check Stock

RAILBLAZA Trolling Motor Mount Support Stabilizer with Starport Hard Mount Base

  • Can be offset inboard or outboard of your boat to suit the alignment of your Trolling motor shaft..
  • Height adjustable to suit different shaft heights depending on your motor mounting position.
  • Flexible strap holds the trolling motor shaft captive to avoid vibration on road or on water..
  • Can be removed to create a clear deck when Trolling motor is in use.
  • Can be order with or without mounting base.
Check Stock

Sntieecr 6 Set 131 PCS DC Motors Kit Mini Electric Motor 1.5-3V 15000RPM with 66 PCS Plastic Gears Shaft Propeller Bulbs Buzzer Sounder Science Experiment Set for Kid DIY STEM Engineering Project

  • SCIENCE MOTOR KIT: Comes with 6 x DC Motor, 6 x Battery Holder Case, 6 x Rocker Switch, 6 x Motor Mounting Bracket, 12 x Electronic Wires(3.92"), 1 x....
  • COLORFUL SHAFT PROPELLERS: 12 Pieces 2 style different colors shaft propellers, 6 pieces 4 Vanes shaft propellers, 6 pieces 3 Vanes shaft propellers....
  • Mounting Hole Distance(center to center): 15mm/ 0.59".
  • Shaft Size: 10 x 2.0mm/ 0.39" x 0.08"(L x D).
  • WIDE APPLICATIONS: This complete electric motor kit good for kids experiment and explore basic electrical simple circuits. It can also be used in....
  • WARNING: Suitable for 8+ years. Be careful of scald caused by short circuit. Do not mix old and new batteries. Do not mix alkaline, standard....
Check Stock

Broan Heater Replacement Vent Fan Motor # 97010254, .9 amps, 3200 RPM, 120 volts

  • Exact replacement motor for: 15353, 04J2063, J238-075-7151, P15353, SX17549.
Check Stock

CHANCS TYC-50 Synchronous Motor 12V AC 5-6RPM CW/CCW 4W Gear Motor Fan Motor

  • This is a TYC-50 AC 12V 5-6RPM synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
  • 【Specification:】 Product Name : Synchronous Motor; Model : TYC-50; Shaft Diameter: 7mm ; Shaft Length: 16mm; Direction :....
  • 【Application:】 Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners,....
  • 【About custom:】Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you....
  • 【Attention:】 The applicable voltage of this motor is AC 12V, using DC power supply, the motor does not work.
Check Stock

NEW 5HP COMPRESSOR DUTY ELECTRIC MOTOR, 56HZ FRAME, 3450 RPM, 7/8\ SHAFT DIAMETER, NEMA RATED MOTOR

  • BRAND NEW TRUE 5HP COMPRESSOR DUTY MOTOR, 56HZ FRAME, 3450RPM, 7/8" SHAFT DIAMETER.
  • 22 FULL LOAD AMP AT 230V, THIS MOTOR NOT SUITED FOR INCOMING VOLTAGE LESS THAN 208V.
  • CCW (COUNTER CLOCKWISE) SHAFT ROTATION WHEN VIEWED FROM THE SHAFT END. SHAFT ROTATION IN NOT REVERSIBLE.
  • 2.25" SHAFT LENGTH, KEYED SHAFT, 60HZ, 1.0 SERVICE FACTOR.
  • WIRING INFO SHOWN ON NAMEPLATE, PROFESSIONAL INSTALLATION REQUIRED.
Check Stock

Lomanco Power Vent Motor Replacement F0510B2944

  • 5" Diameter Motor - Shaft: 1/2" Diameter x 1.75" with Flat on Shaft.
Check Stock

CHANCS TYD-50 Synchronous AC Motor 110V 5-6RPM CW/CCW Small Electric Gear Motor Flush Shaft 11mm Wfor Electric Fireplace

  • This is a TYD-50 AC 110V 5-6RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear....
  • 【Specification:】 Product Name : Synchronous Motor; Model : TYD-50; Shaft Diameter: 7mm ; Shaft Length: 11mm; Shaft Hole Screw Thread: M4....
  • 【Application:】 Suitable for Barbecue Rotisserie , Party BBQ. Widely used in hand-made, school project, electric fan shake heads, heaters,....
  • 【Package Content:】1 x Synchronous Motor.
  • 【Attention:】 1.The applicable voltage of this motor is AC 110V-130V, too high voltage will burn the motor. 2.The motor speed is not an accurate....
Check Stock