Top Motor Driver With Uart Reviews

ft232rl USB uart TTL 3.3v Cable with 3.5mm Stereo Jack Serial Cable TTL 3.3v to USB Cable Compatible for ftdi ttl-232r-3.3v-aj

  • USB to UART cable with +TTL level UART signals with FTDI chipset.
  • Standard Pinout: Tip-TX, Ring-RX, Sleeve-GND.
  • 3.5mm 3P audio jack male ，2 core and spiral, 24 AWG diam=5mm.
  • Support Android, Support Win 8, Win 7, XP, 2000, Linix, Mac OS Support EEPROM, support Vendor ID re-write,support Mprog Support FTDI VCP driver and....
Check Stock

SparkFun XBee Explorer Dongle - Red

  • UART communication board, XBee interface, USB interface.
  • XBee USB Adapter is a UART communication board which supports XBee connectivity, features UART interface, USB interface, and onboard buttons/LEDs,....
  • Test XBee modules: onboard buttons/LEDs for easy testing. Program/Configure XBee modules: make it easy to program/configure the XBee modules....
  • USB to UART module: features CP2102, provides UART interface and power output interface, connect it to your system easily.
  • Note:The XBee/ZigBee modules and Core2530 (B) in the photos are NOT included..
Check Stock

DIYmall ESP8266 Firmware Downloader Flash Download Tool Test Board Code Burner for ESP8266 ESP-01S/01 ESP-07/07S ESP-12E/12F/12S/F

  • Compatible with ESP-01 ESP-01S ESP-12F ESP-F ESP-S ESP-12S ESP-12E ESP-C3F ESP-C2.
  • Video tutorial link: https://youtu(DOT)be/oLtgUKrG6wM.
  • You need install CP2102 driver first, driver link: https://www(DOT)silabs(DOT)com/products/development-tools/software/usb-to-uart-bridge-vcp-drivers.
  • Espressif flash download tool link: https://www(DOT)espressif(DOT)com/en/support/download/other-tools.
  • The board supports firmware one-click download function and adds programming..
Check Stock

RATTMMOTOR 400W Blushless CNC Air Cooled Spindle Motor ER8 12000RPM + 600W Blushless Spindle Motor Driver LCD Panel without Hall + 55mm Clamp Mount for CNC Router Milling Machine

  • 【Brussless Spindle Motor】Power: 400W.
  • Note: Please see clearly that this spindle motor output shaft is with ER8 collet,and output shaft is complete shaft, can't be exchanged to ER11, ER16....
  • 【Brussless Spindle Motor Driver】Maximum driver power: 600W.
  • Maximum driver motor running speed: 12000R/Min.
  • Brushless spindle driver（Model Name: NVBDL）is specialized for the ecomomic engraving machine,it matchs with the brushless DC motor. With the....
  • The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,you can set the parameter,control motor....
Check Stock

3D Printer TMC2209 V1.2 Stepper Motor Driver with Heatsink 2.8A Peak Driver 3D Printer Parts for SKR V1.3 MKS GEN L Ramps 1.4/1.5/1.6 3D Printer Control Board, 4PCS

  • A large area of thermal pad, reduce the temperature of the driving work..
  • Support stall detection, locked-motor test..
  • Support STEP / DIR and UART mode, you can use these function via modify the firmware..
Check Stock

DALY Smart BMS 24V L-ion 7S 60A with Bluetooth Module Resetting Program Common Port for DIY Lithium Battery Pack

  • 【Parameter Real Time View】---With Smart Communication Function UART Protocol ,All Parameters can be check Via Bluetooth App or UART USB Connection with PC Monitoring Program..
  • 【Parameters Programmable】 Charge And Discharge Protection Current ,Voltage,Temperature Can Be Reset in Certain Range.
  • 【Alarm Reminder:】When Factors Like Temperature, Voltage , Current Cause Negative Affection to Battery , There Will be Alarm Display on Bluetooth Smart BMS APP/ PC Monitoring Program..
  • 【Quality Guarantee】 ISO/ FCC/ RoHS/ PSE/ CE APPROVED.Shipping time within 9-14 days from China Dalyelec Manufacturing base normally. Delivery will be postponed as per National Holidays Regulation. Tracking information available..
  • 【What you will get: 】Rated 3.7V Li-ion Smart BMS (With Smart Communication Function UART)+Bluetooth Module +UART USB +Matching Balance Wire+Temperature Sensor+ Instruction Manual.
Check Stock

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

  • 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface could be connected with Driver Board easily.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
  • Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check Stock

3D Printer Parts SKR V1.3 Control Board 32 Bit CPU 32bit Board Smoothieboard for MKS GEN L Ramps 1.4 SKR PRO for Ender 3 CR10

  • Good Heat Dissipation,large heat dissipation area, good heat dissipation effect..
  • The motor current can be set arbitrarily via firmware.
  • The microsteps can be set arbitrarily via firmware (up to 256 actual microsteps)..
  • The actual and interpolated microsteps can be combined to achieve maximum torque..
  • The firmware can dynamically switch the stepper motor between stealthChop2 and SpreadCycle mode via UART. If the engine is not moving, the engine....
Check Stock

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock

FTDI USB-RS485-WE-1800-BT Cable, USB to RS485 Serial, 1.8M, Wire END

  • Price For: Each Accessory Type: CABLE, SERIAL CONVERSION For Use With: USB to RS485, SERIAL CONVERSION RoHS Compliant: Yes.
  • The USB-RS485-WE-1800-BT from FTDI is an USB to UART cable with RS485 level UART signals..
  • It corporate FTDI's FT232RQ USB to serial UART interface IC which handles all USB signalling and protocols.
  • The integrated electronics also include RS485 transceiver, Tx and Rx LEDs which give a visual indication of traffic on cable..
Check Stock

BTT SKR Pico V1.0 3D Printer Control Board with TMC2209 Stepper Drive Onboard A Motherboard Specially Customized for VORON V0 V0.1 3D Printer Suitable for Raspberry Pi Using Kilpper Firmware

  • 【VORON V0 V0.1 customized motherboard】BIGTREETECH SKR PICO control board is specially made for VORON 3d printer, using Raspberry Pi (Raspberry Pi)....
  • 【Silent printing, noise reduction】 SKR PICO V1.0 has onboard TMC2209 silent stepper driver, UART mode, no external driver required, easy to use.....
  • 【Heat dissipation upgrade】 BTT SKR PICO V1.0 adopts a new design heat sink to enhance heat dissipation and aesthetics.
  • 【New design:】SKR PICO SMD capacitor (MLCC) adopts Murata capacitor.
  • fuse is in the form of fuse holder + fuse, which is easy to disassemble.
  • 【Temperature sensor interface】 TH0, THB, 2-way 100K NTC (thermal resistance) and Raspberry Pi (Raspberry Pi) communication interface: TYPE-C,....
Check Stock

SpeedyBee Mini F7 Flight Controller 3-6S 20x20mm Built-in Bluetooth Drone Stack Support Wireless Tuning for 2-4 Inch FPV Drone

  • The SpeedyBee Advantage: Download SpeedyBee App on your mobile devices, free to change the settings of flight controller and ESC anywhere without a computer..
  • Wireless FC ESC Tuning: Connect the SpeedyBee app via Bluetooth, configure the UART Ports,PID,OSD and every other settings on this flight controller and BLHeli_S ESC in this stack wirelessly..
  • Support Digital And Analog Fpv System: The flight controller supports various analog image transmissions above 5V and also compatible with DJI Air Unit and Caddx Vista..
  • Change Motor Directions Wirelessly- It’s convenient to change the motor directions just in a few simple steps on SpeedyBee app..
  • What You Get: SpeedyBeeF7MiniFlightController, Manual Card.
Check Stock

ideaspark 3pcs ESP8266 NodeMCU CH340 ESP-12E WiFi Wireless Internet Development Board Serial Module with Micro USB Cable Works Great for Arduino IDE

  • ... easy to use.Works greate with Arduino/Mongoose IoT/Micropython.
  • CH340 replace CP2012 USB to UART Bridge ,provides a better performance plug and play interface solution and easier programming. Use the search engine Google.com or Bing.com earch for the keyword r "CH340 driver", it is very easy to find the driver installer.
  • Applications:Access points portals,IoT projects,Wireless data logging,Used in learning the networking fundamentals,Sockets and smart bulbs,Smart home automation systems.
Check Stock