Top Motor Driver Breakout Reviews

3D Printer Controller Kit RepRap RAMPS 1.4 + 2560 Board + 5pcs A4988 Stepper Motor Driver with Heatsink + LCD 12864 Graphic Smart Display 3D Printer Controller Kit

  • 2560 control board: The board is a microcontroller board based on the 16AU .It has 54 digital input/output pins (of which 14 can be used as PWM....
  • RAMPS 1.4: RAMPS interfaces an for Arduino with the powerful for Arduino platform and has plenty room for expansion. The modular design includes plug....
  • LCD 12864 with Controller: This full graphic Smart Controller contains a SD-Card reader, an rotary encoder and a 128 x 64 dot matrix LCD display. You....
  • A4988 driver module: A4988 Stepper Motor Driver Board is a breakout board for Allegro?ˉs A4988 DMOS Microstepping Driver with Translator and....
  • Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver. (More generally, rewiring anything while it....
Check Stock

5pcs A4988 StepStick Stepper Motor Driver Module + Heat Sink for 3D Printer RepRap

  • This stepper motor driver lets you to operate bipolar stepper motors in full-, half-, quarter-, eighth-,and sixteenth-step modes, with an output drive....
  • There are no phase sequence tables, high frequency control lines, or complex interfaces to program..
  • The A4988 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened..
  • The translator is the key to the easy implementation of the A4988. Simply inputting one pulse on the STEP input drives the motor one microstep..
  • This product is a breakout board for Allegro¡¯s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection.
Check Stock

KEYESTUDIO Motor Driver HAT Breakout Board for BBC Microbit TB6612FNG with Terminal Block Serial Pins

  • Specially researched and developed this motor driver breakout board to facilitate the micro bit to drive DC motor..
  • Four motor control modes: Forward/Reverse /Brake /Stop.Access to 3Pin headers connection..
  • Integrated with 3.3V and 5V voltage-regulator chip. Comes with a serial communication port for Bluetooth module..
  • EXCELLENT QUALITY: solder is very clean, everything is aligned nicely, all boards are well packed after function,voltage, current testing, protected in a beautiful box..
  • Up to FCC and CE Standard: made from environmentally friendly components and materials, as well as environmentally friendly production technology, it is really safe..
Check Stock

4 Axis CNC Nema23 Stepper Motor Dual Shaft 425oz-in 3A+FMD2740C Driver 40V 4A+400W 36V Power Supply+USB CNC Breakut Board Controller Kit For CNC Router

  • ♞【Product】4 Axis nema23 stepper motor driver usbcnc controller kit.
  • Wirings: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue.
  • ♞【Driver】FMD2740C driver Voltage: DC12-50V.
  • Current: rated maximum output reaches: 4A.
  • Subdivision precision 2 8 16 32 64 128 10 20 optional.
  • ♞【4 Axis USBCNC Breakout Board】USB port,only support USB CNC Software,not fit for Mach3 software.Our parcel include a CD,it include the user manual and USBCNC software.
  • ♞【400W 36V 11A DC Switching power supply】Please flip the side input voltage selector switch,Input: AC110V-120V or AC220V-240V.
  • 【Computer system 】Support Win XP/7/8/10,if you can not get the activation code on Win 10,pls let us know,we will help you to solve it..
Check Stock

SainSmart CNC 4-Axis Kit with TB6600 Driver ST4045 & Nema23 270oz-in Stepper Motor USB Controller Card Nema23 Stepper Motor and 36V Power Supply

  • Comes with CNC USB port interface breakout board.
  • 4.5A ST-4045 stepper motor driver, ensure the stable operation of equipment.
  • the range of AC input voltage is changed by the switch.
  • 57HS76 stepper motor, powerful and stable to work..
Check Stock

ATX Power Supply Breakout Board and Acrylic Case Kit with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) Output Voltage, 3A Maximum Output, Reset Protection. New Version

  • ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage.
  • The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
  • Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc.
  • Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..
Check Stock

New Version ATX Power Supply Breakout Board and Acrylic Case Kit with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) Output Voltage, 3A Maximum Output, Reset Protection.

  • 1.ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage..
  • 2.The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
  • 3. At the same time, the panel is also equipped with an acrylic case kit for easy to use..
  • 4.Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc..
  • 5.Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..
Check Stock

UEi Test Instruments Ha1 Hermetic Compressor Analyzer

  • Top load panel with positioning holes allows unit to transport loads.
  • Free locked rotors by reversing motor action - Dual voltage operation of 120/240 VAC.
  • Indicates continuity and ground faults in motor windings with LED lights.
  • Convenient breakout jacks for measuring voltage and resistance.
  • 3 ranges of 250 VAC starting capacitors between 88-301 MFD.
Check Stock

RATTMMOTOR 400W Blushless CNC Air Cooled Spindle Motor ER8 12000RPM + 600W Blushless Spindle Motor Driver LCD Panel without Hall + 55mm Clamp Mount for CNC Router Milling Machine

  • 【Brussless Spindle Motor】Power: 400W.
  • Note: Please see clearly that this spindle motor output shaft is with ER8 collet,and output shaft is complete shaft, can't be exchanged to ER11, ER16....
  • 【Brussless Spindle Motor Driver】Maximum driver power: 600W.
  • Maximum driver motor running speed: 12000R/Min.
  • Brushless spindle driver（Model Name: NVBDL）is specialized for the ecomomic engraving machine,it matchs with the brushless DC motor. With the....
  • The users can take down the panel from the main driver and install it on the controller cabinet.By the panel,you can set the parameter,control motor....
Check Stock

KEYESTUDIO 37 Sensors Modules in 1 Box Starter Kit for Raspberry Pi 4 4B 3 3B 2B+, Tutorials Python C Java Scratch Code, 38 Projects, GPIO Breakout Board Breadboard LCD Programming for Kids Adult

  • ...mming languages: 32 Python lessons, 32 lessons in C language, 20 processing lessons in Java -003e you can simply download the tutorial code, wiring package and get started with the PI tinkering. Good invention and great to have as tool for invention and programming.
  • 【High-quality Components 100+】 Contains a GPIO breakout board and high-quality sensors modules like Temperature and Humidity Sensor,Joystick Module,Stepper Motor Driver,PCF8591 A/D Converter Module,etc.and a series of electronic components such as resistors,leds,buzzers and many more..
  • 【The Ideal Gift for Advancers】 The box comes in with all the parts neatly arranged inside. Every item is well-sealed. It is a highly recommended gift for boys & girls's birthday, Christmas Day, Children's Day and other special days, summer camp, stem activities, back to school..
  • 【Professional Support】 You could also get the latest tutorials on the wiki web. Our technical support team and customer service are always ready to help you..
Check Stock

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

  • 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface could be connected with Driver Board easily.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
  • Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check Stock

[Upgraded] Black Highway Pegs Foot Rest Compatible with Harley Sportster Softail Touring Road Glide Road King Street Glide with 1 1/4 inch Highway Bar (Black,1 Pair)

  • Fitment: For Harley Softail Models 2018-Current. Tapered Driver Peg Adapter for 2018-2020 Softail & LiveWire, 2018-2020 Softail, Models with Driver Pegs & 2020 LiveWire..
  • Fits For Softial (Breakout FXBR 107 ,FXBRS 114,2018-2019) / (Fat Bob FXFB 107 ,FXFBS 114,FLFB 107,FLFBS 114 2018-2019) / (Heritage Classic FLHC, FLHCS 2018-2020) / (Street Bob FXBB 107 2018-2020)..
  • Material: Aluminum+Stainless Steel./Condition: 100% Brand New Aftermarket. No Installation Instructions..
  • This MX Softail Footpegs are full of stainless steel screw-tooth that providing the rider with the ultimate grip and anti slip control in any race conditions..
  • This softail mx pegs are CNC finished by high quality alloy aluminum. More stronger than other pegs on the market..
Check Stock

MINARIK MM23001C 0-90/0-180V-DC 1/4-2HP 5A AMP DC MOTOR DRIVE D506404

  • Motor Driver: 9V-42V DC power supply, H bridge bipolar constant phase flow drive. The maximum 4.0A of the eight kinds of output current..
  • Motor Driver: Energy-saving semi-automatic current lock function, built-in temperature protection and over current protection.The largest 32 subdivision of the 6 models are optional..
  • Package: TB6600 stepper motor driver + nema 17 stepper motor + mounting bracket + inner hexagon spanner + M3/M4 screws.
  • Strive for 100% service satisfactory, any question or problem please do not hesitate to contact us, we are always happy to help..
Check Stock