Top Motor Driver Breakout Board Reviews

3 Axis CNC Kit Nema23 Stepper Motor Dual Shaft 425oz-in 112mm 3A & Driver 40VDC 4A 128 microstep for CNC Router Milling Engraving Machine

  • ♞【Product】3 Axis nema23 stepper motor driver usbcnc controller kit.
  • ♞【Nema 23 Stepper Motor】 Nema 23 Stepper Motor / Holding Torque: 425oz-in,280Ncm / Motor Size:57x57x112mm / Phase:2 / 4pcs lead wire / 1.8 Step.
  • ♞【Stepper Motor Driver】FMD2740C Stepper Motor Driver / 4Amps / Support voltages:12 to 50V DC / 128microstep.
  • ♞【4 Axis USBCNC breakout board】 Come with Hand Control with USB Cable / Only support USBCNC software / input voltage: 15-36V DC..
  • ♞【DC Power Supply】400W 36V 11A DC Switching power supply.
Check Stock

5pcs A4988 StepStick Stepper Motor Driver Module + Heat Sink for 3D Printer RepRap

  • This stepper motor driver lets you to operate bipolar stepper motors in full-, half-, quarter-, eighth-,and sixteenth-step modes, with an output drive....
  • There are no phase sequence tables, high frequency control lines, or complex interfaces to program..
  • The A4988 interface is an ideal fit for applications where a complex microprocessor is unavailable or is overburdened..
  • The translator is the key to the easy implementation of the A4988. Simply inputting one pulse on the STEP input drives the motor one microstep..
  • This product is a breakout board for Allegro¡¯s A4988 DMOS Microstepping Driver with Translator and Overcurrent Protection.
Check Stock

KEYESTUDIO Motor Driver HAT Breakout Board for BBC Microbit TB6612FNG with Terminal Block Serial Pins

  • Specially researched and developed this motor driver breakout board to facilitate the micro bit to drive DC motor..
  • Four motor control modes: Forward/Reverse /Brake /Stop.Access to 3Pin headers connection..
  • Integrated with 3.3V and 5V voltage-regulator chip. Comes with a serial communication port for Bluetooth module..
  • EXCELLENT QUALITY: solder is very clean, everything is aligned nicely, all boards are well packed after function,voltage, current testing, protected in a beautiful box..
  • Up to FCC and CE Standard: made from environmentally friendly components and materials, as well as environmentally friendly production technology, it is really safe..
Check Stock

4 Axis CNC Nema23 Stepper Motor Dual Shaft 425oz-in 3A+FMD2740C Driver 40V 4A+400W 36V Power Supply+USB CNC Breakut Board Controller Kit For CNC Router

  • ♞【Product】4 Axis nema23 stepper motor driver usbcnc controller kit.
  • Wirings: "A+"=Red / "A-"=Green / "B+"=Yellow / "B-"=Blue.
  • ♞【Driver】FMD2740C driver Voltage: DC12-50V.
  • Current: rated maximum output reaches: 4A.
  • Subdivision precision 2 8 16 32 64 128 10 20 optional.
  • ♞【4 Axis USBCNC Breakout Board】USB port,only support USB CNC Software,not fit for Mach3 software.Our parcel include a CD,it include the user manual and USBCNC software.
  • ♞【400W 36V 11A DC Switching power supply】Please flip the side input voltage selector switch,Input: AC110V-120V or AC220V-240V.
  • 【Computer system 】Support Win XP/7/8/10,if you can not get the activation code on Win 10,pls let us know,we will help you to solve it..
Check Stock

ATX Power Supply Breakout Board and Acrylic Case Kit with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) Output Voltage, 3A Maximum Output, Reset Protection. New Version

  • ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage.
  • The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
  • Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc.
  • Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..
Check Stock

SainSmart CNC 4-Axis Kit with TB6600 Driver ST4045 & Nema23 270oz-in Stepper Motor USB Controller Card Nema23 Stepper Motor and 36V Power Supply

  • Comes with CNC USB port interface breakout board.
  • 4.5A ST-4045 stepper motor driver, ensure the stable operation of equipment.
  • the range of AC input voltage is changed by the switch.
  • 57HS76 stepper motor, powerful and stable to work..
Check Stock

New Version ATX Power Supply Breakout Board and Acrylic Case Kit with ADJ Adjustable Voltage Knob, Supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) Output Voltage, 3A Maximum Output, Reset Protection.

  • 1.ATX power supply breakout board, with ADJ adjustable voltage knob, supports 3.3V, 5V, 12V and 1.8V-10.8V (ADJ) output voltage..
  • 2.The voltage output terminals of the ATX power expansion board correspond to each screw terminal..
  • 3. At the same time, the panel is also equipped with an acrylic case kit for easy to use..
  • 4.Compatible with 3.3V: STM32 MCU, network communication equipment, such as Wi-Fi Bluetooth and other devices, generally for microcontrollers, and some low-power modules, etc. 5V: Raspberry Pi, Banana Pi, Tinker Board, Nano Pi, USB interface, etc..
  • 5.Compatible with 9V: Arduino, motor drive, display driver module, etc. 12V: motor drive, LED light, vehicle equipment with power requirements less than 24w, etc..
Check Stock

Treedix Breakout Board Module with Pin Header for Teensy 3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions. The breakout board is well-made, gold-plated on both sides to prevent oxidation..
  • All pins on the breakout board are accessible, Teensy3.5 is compatible with arduino integrated development environment (IDE).
  • Simple and easy to assemble, can be used in conjunction with a breadboard, the spacing between the holes on the board: 2.54mm.
  • The breakout board module can easily extend the Teensy 3.5/3.6 project to industrial control, home automation or other applications..
  • Note: The package is not include Teensy development board and breadboard.
Check Stock

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

  • 5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface could be connected with Driver Board easily.
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
  • Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.
Check Stock

LAFVIN 5 Sets 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • Stepper motor with a standard interface..
  • A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Drive Module Board Size(in): 1.37*1.18*0.6.
  • 5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board，With convenient use, direct docking.
  • Package Content: 5 set 28BYJ-48 Stepper Motor + Uln2003 Driver Board +20pcs female to male Dupont cable (as a gift).
Check Stock

Treedix Breakout Board Module with Pin Board for Teensy 4.1/3.5/3.6 Compatible with Arduino

  • The breakout board expands the connection with all the processor functions, the circuit board is well-made, gold-plated on both sides to prevent oxidation.
  • Simple and easy to assemble, it can be used in conjunction with a breadboard, the distance between the holes on the board is 2.54mm.
  • Widely compatible: all pins on the breakout board are accessible, and can be used in conjunction with Arduino IDE and Arduino compatible hardware.
  • Use this breakout board module to easily extend Tennsy 4.1 project to industrial control, home automation or other applications.
  • Note: The package is not include teensy development board.
Check Stock

6 PCS 28BYJ-48 ULN2003 5V Stepper Motor + ULN2003 Driver Board for Arduino

  • ❃❃ The stepping motor is a kind of mechanical and electrical device that converts electrical pulses into angular displacement. Come with a standard interface, when used directly pluggable..
  • ❃❃ Drive Module Board Size(in): 1.37 * 1.18 * 0.6(in).
  • ❃❃ A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • ❃❃ 5 line 4 phase can be used for ordinary ULN2003 chip driver, Connect to the 2 phase, Support the development board, With convenient use, direct docking..
  • ❃❃ Great packing in a box : 6 PCS ULN2003 Stepper Motor + Driver Board (with a little gift)..
Check Stock

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board with ArduinoIDE (no Wire)

  • 5pcs Stepper motor and driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
  • Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work..
  • Motor diameter: 1.1 inches.Wire length：9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch..
  • Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board..
Check Stock