Top Motor Driver For Raspberry Pi Reviews

GeeekPi 6-Layers Raspberry Pi Cluster Case,Raspberry Pi Rack Case with Raspberry Pi Heatsinks Stackable Case Stack Enclosure for Raspberry Pi 4/3/2 Model B,Raspberry Pi 3 Model B+ (Clear)

Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
The case includes heatsinks for cooling down your Raspberry Pi better..
The stackable case can provide you with an environment to put six pieces of Raspberry Pi board together..
Package Includes:1 x 1 Pack of 6-Layer Acrylic Cluster framework For Raspberry Pi,6 x Aluminum Heat Sink pack (For RPi 4B),6 x Aluminum and Copper Heat Sink Pack (For RPi 3B+),1 x Screw driver.

Check Stock

GeeekPi Raspberry Pi Cluster Case for Raspberry Pi 4 Model B, Raspberry Pi Case with Cooling Fan and Raspberry Pi Heatsink for Raspberry Pi 3 Model B+, Raspberry Pi 3/2 Model B

Compatible with Raspberry Pi 4 Model B & Raspberry Pi 3 B+ & Raspberry Pi 3/2 Model B.
Access to all ports and slots of Raspberry Pi, including SD card slot, GPIO port, USB ports, HDMI port and so on..
The case includes cooling fans and heatsink for cooling down your Raspberry Pi better. The metal protective cover on the top will protect the cooling fan against being destroyed..
The stackable case can provide you with an environment to put four pieces of Raspberry Pi board together. The instruction manual will tell you how to assemble step by step..
Package Includes: 5x Acrylic Plates, 4x Cooling Fans with Metal Protective Cover, 12x Heatsinks for Raspberry Pi 3B+/3B/2B,16x Heatsinks for Raspberry Pi 4 Model B(Added on 2019.8.2), 1x Screw Set, 1x Screw Driver,1x Instruction Manual.

Check Stock

GeeekPi 5 Pack Geared Stepper Motor 28BYJ-48 5V Stepper Motor + Uln2003 Motor Driver Board + Dupont Wire Jumper Wires Ribbon Cables Compatible with Arduino

5pcs Stepper motor and driver board compatible with arduinoIDE 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
Stepper motor with a standard interface could be connected with Driver Board easily.
A, B, C, D four-phase LED indicates the status of the stepper motor work..
5 line 4 phase can be used for ordinary ULN2003 chip driver, connect to the 2 phase , support the development board, with convenient use, direct docking..
Package Includes:5 x Stepper Motor,5 x ULN2003AN Driver Board,30 x Female-to-female jump wire.

Check Stock

5 inch HDMI LCD Display for Raspberry Pi 800x480 Touchscreen Monitor TFT Capacitive Screen Support Raspberry Pi 4B/ 3B+/A+/B/ 2B/ B+/A+/ Zero W Compatible with Windows 10/8.1/8 / 7

【Raspberry Pi 5" Touch Display】5 inch Capacitive Touch Screen LCD (H) Slimmed-Down Version, 800×480, HDMI Display Port, USB Touch Port, Toughened Glass Panel, Low Power Consumption.
【Working With Raspberry Pi】Supports all versions of Raspberry Pi, Supports Raspbian, 5-points touch, driver free.
Supports Ubuntu / Kali / WIN10 IoT, single point touch, driver free.
Supports Retropie, driver free (When working with Raspberry Pi Zero W, additional mini HDMl adapter and USB cable are required).
【Working With PC】Supports Windows 10 / 8.1 / 8 / 7, 5-points touch, driver free.
【Touch Control】5 inch Capacitive Touch Screen LCD Display, up to 5-points touch, depending on the operating system, up to 6H hardness toughened glass panel.
【Package Content】5inch HDMI LCD (H) V4 x1, HDMI cable x1, HDMI to Micro HDMI Adapter x1, USB type A plug to micro B plug cable x1, RPi screws pack (4pcs) x1. Provide technical support.

Check Stock

Yahboom Raspberry Pi Quiet Cooling Fan for Raspberry Pi 4B 3B+ 3B Intelligent Temperature Control Programmable RGB（OLED Display Include）

Random gifts: We will randomly select packages to give away the OLED screen matched with Raspberry Pi Cooling Fan. Perhaps the next lucky one is you..
The speed of the cooling fan can be changed according to the temperature of the raspberry PI through code programming, which can better ensure that your Raspberry Pi is running at a safe temperature.No wiring！No waste of IO port！It also expand Raspberry Pi 40pin header and can be used to connect to other devices..
There are three high brightness RGB lights on the temperature control expansion board. Through programming, you can not only change the color, but also use different color lights to represent different temperatures..
The Raspberry Pi cooling hat driver package is already installed and is suitable for all Raspberry Pi system images, while Yahboom offers all the necessary courses.★★★Important Note: Only the RGB lights will be on after the Raspberry Pi hat is powered on. You must run the program provided by Yaboom before the fan will rotate according to the temperature of the Raspberry Pi board. If you do not run the program, your fan will not rotate! ★★★.
The design of the Raspberry Pi IO port is not affected. Improved design, the fan runs absolutely quiet at any stage, please rest ....

Check Stock

Longruner 5X Geared Stepper Motor 28byj 48 Uln2003 5v Stepper Motor Uln2003 Driver Board with ArduinoIDE (no Wire)

5pcs Stepper motor and driver board compatible with 2560 1280 DSP ARM PIC AVR STM32 Raspberry Pi..
Stepper motor with a standard interface. A, B, C, D four-phase LED indicates the status of the stepper motor work..
Motor diameter: 1.1 inches.Wire length：9.05 inchs. Stepping angle: 5.625 x 1/64.Reduction ratio: 1/6.Drive Module Board Size:1.26 inchsX1.38inchs. Cable length: about 20cm /8-inch..
Great packing in a box : 5 set Uln2003 Stepper Motor + Driver Board..

Check Stock

Data Visualization with Python for Beginners: Visualize Your Data using Pandas, Matplotlib and Seaborn (Machine Learning & Data Science for Beginners)

HIGH RESOLUTION – The 10.1 inch Raspberry Pi touchscreen LCD monitor (supports 10-Point touch) features high resolution of 1280*800 pixels and true-color image, giving you a truly immersive viewing experience..
PLUG AND PLAY – Just connect the control board and the screen by an HDMI cable and it can work immediately, needless of driver..
REAR FIXING – Adjustable fixing slots design for fixing most single board computers, widely compatible with Raspberry Pi 4B, 3B+, Zero, Banana Pi M5, Rock Pi X Model B, LattePanda V1, Orange Pi 4B and etc..
LESS WIRING – Configured driver board with multiple interfaces provides stable 5V/3A power output for the needs of the compatible boards, all the cables are designed with suitable length, neat and tidy when connecting..
NOT JUST A TOUCHSCREEN – Please refer to our online detailed toturial, where you can find the the 3D design drawing provided for diying your own case. Besides, we also share a variety of different plug-in and interesting projects when play with raspberry pi..

Check Stock

waveshare for Raspberry Pi Pico Evaluation Kit B Include Pi Pico Board with Pre-Soldered Header,1.14inch RGB Color LCD, 10DOF IMU Sensor Module,Dual GPIO Expander,Breadboard

Raspberry Pi Pico Evaluation Kit inlclude Raspberry Pi Pico with pre-soldered header ,1.14inch LCD Display Module,10-DOF IMU Sensor Module,Dual GPIO Expander ,830 Quality Breadboard etc.
Raspberry Pi Pico Board,a tiny, fast, and versatile microcontroller board,Built Using RP2040 Microcontroller Chip Designed By Raspberry Pi.
1.14" LCD Display Module for Pico ,Embedded ST7789 Driver, Using SPI Bus.
10-DOF IMU Sensor Module,an IMU sensor expansion module specialized for Raspberry Pi Pico. It incorporates sensors including gyroscope, accelerometer, magnetometer, baroceptor, and uses I2C bus for communication..
Dual GPIO Expander for Pico,Two Sets Of Standard Raspberry Pi Pico GPIO Male Headers.

Check Stock

Eyoyo 7 inch Monitor, 7\ IPS Panel 1024x600 5-Points Capacitive Touchscreen Portable Raspberry Pi Monitor Screen Mini HDMI Monitor for Raspberry pi/Laptop/PC/Game Console

...ss. It is made of HD IPS panel has a full viewing Angle of 178 degrees. It displays vivid color realistic pictures from all angles without color bias. The 5-point capacitive touch screen can respond quickly in 3-5ms, no matter whether you click the screen or swipe the page, there will be no stutters or tears..
【7 "Raspberry Pi Screen】 - This monitor is designed for Raspberry Pi enthusiasts, it has a mini HDMI port and micro HDMI adapter, supports most of the Raspberry PIs on the market, Raspberry Pi 4/4b/3/3b/3b/Raspberry Pi zero and more. Plug and play, driver free. The capacitive touch screen allows you to click or swipe any time, which is perfect for Raspberry Pi DIY enthusiasts..
【Small Single Board Monitor】 - This single board monitor has wide compatibility and supports all kinds of pi, banana pi, Rock pi, BB Black, Raspbian, Kali Linux, Ubuntu, Kodi, Win10 IOT. Supports Windows 7/8/10/11 and other systems, driver free. In addition, it supports major consoles such as PS4, XBOX360, Switch and TV box, which is a powerful small portable monitor..
【7 inch Second Monitor for PC】- This monitor has copy mode, extended mode and single board display mode for choose from, it can be easily connected to a PC or laptop, 7 inch mini size to save spac....

Check Stock

Geekworm X820 V3.0 2.5“ SATA HDD/SSD Storage Expansion Board, USB 3.0 Mobile Hard Disk Module for Raspberry Pi 3 B+/3B/ROCK64/Tinker Board&2.5 Inch SATA HDD/SSD

✔ Please use this high quality certified DC 5V 4A power supply(ASIN :B07413Q5Y4).Power supply request: 5Vdc +/-5% , 4A.
The power adapter not only powers Raspberry Pi board but also powers your SSD or HDD. If the power is low, the SSD/HDD may not be identified or damage your RPi or X820 board. [Do Not Use ASIN:B01K0608A0!!!].
✔ Raspberry Pi SATA X820 V3.0 HDD/SSD USB3.0 shield expansion board provides an complete storage solution for Raspberry Pi motherboard/ROCK64, Support up to 4TB 2.5 inch SATA interface hard disk drives (HDD) / solid-state drive (SSD). A good raspberry pi sata adapter for Raspberry Pi 3B+, 3B, 2B, B+, ROCK64. Note: For Raspberry Pi 4 Model B 2.5 inch SATA HDD/SSD storage board, please refer to ASIN:B07VXF2HJG.
For Raspberry Pi 4 Model B mSATA SSD storage board, please refer to ASIN: B07VXFGFLX.
✔ X820 V3.0 supports USB booting from your HDD/SSD('reboot' command is supported), a useful and reliable function to every raspberry pi users or fans. Suggest to use with geekworm x820 metal case(ASIN :B07GRZRW7J).
User manual, pls refer to Geekworm WiKi search(X820)..
✔ Powers the Raspberry Pi via Pi's 40-pin header or Micro USB socket.
Furthermore, On-board XH2.54 connector and USB power socket (5V 2A output) to power other devices,....

Check Stock

SunFounder Raspberry Pi Ultimate Starter Kit for Raspberry Pi 4B 3B+ 400 with PiCrawler AI Robot kit for Raspberry Pi

【Ultimate Raspberry Pi Kit】SunFounder Raspberry Pi Ultimate Kit is suitable for all users, from beginners to advanced programmers. Containing a full range of components and sensor modules, the suite of 131 example projects will maximize the functionality of all Raspberry Pi models..
【337 Components and IoT Modules】Comes with all the necessary components and IoT modules for learning application programming and exploring creative prototyping, such as: camera module, speaker, dot matrix module, I2C LCD module, infrared sensor, accelerometer, 9G servo motor, and many more..
【Raspberry Pi Robot】The PiCrawler is a flexible AI robot kit compatible with Raspberry Pi 4B, 3B, 3B+ and 2B (Raspberry Pi not included). Suitable for adults and teens, the PiCrawler is the ideal platform for learning robotics programming, OpenCV, TensorFlow and Deep Learning..
【Various Actions】The Raspberry Pi Robot Kit can be programmed with different actions (13 actions examples provided for your reference, such as: push up, twist and wave etc). You can also customize the actions according to your needs..
【One-stop Online Learning & Programming】SunFounders online learning platform provides a professional one-stop shop for programming the Raspberry Pi. With detailed ....

Check Stock

BTT SKR Pico V1.0 3D Printer Control Board with TMC2209 Stepper Drive Onboard A Motherboard Specially Customized for VORON V0 V0.1 3D Printer Suitable for Raspberry Pi Using Kilpper Firmware

【VORON V0 V0.1 customized motherboard】BIGTREETECH SKR PICO control board is specially made for VORON 3d printer, using Raspberry Pi (Raspberry Pi)....
【Silent printing, noise reduction】 SKR PICO V1.0 has onboard TMC2209 silent stepper driver, UART mode, no external driver required, easy to use.....
【Heat dissipation upgrade】 BTT SKR PICO V1.0 adopts a new design heat sink to enhance heat dissipation and aesthetics.
【New design:】SKR PICO SMD capacitor (MLCC) adopts Murata capacitor.
fuse is in the form of fuse holder + fuse, which is easy to disassemble.
【Temperature sensor interface】 TH0, THB, 2-way 100K NTC (thermal resistance) and Raspberry Pi (Raspberry Pi) communication interface: TYPE-C,....

Check Stock

Miuzei Raspberry Pi 4 Touchscreen with Case Fan, 4 inch IPS Touch Screen LCD Display, 800x480 HDMI Monitor for RPI 4b 8gb/4gb/2gb with Touch Pen (Support Raspbian/Kali/Octopi/Ubuntu)- No Raspberry Pi

Raspberry Pi 4 Touchscreen – Raspberry Pi 4 Inch IPS full-angle display monitor, 800 x 480 physical resolution support HDMI input, refresh rate up to 60fps..
Orange Pi Touchscreen – Miuzei raspberry pi 4 monitor support HDMI audio output, data entry (computer, DVD), HDMI audio input, stereo 3.5mm audio output..
Raspberry Pi 4 Screen Case – Pi 4 inch touch screen compatible with raspberry pi 4 b/4b/4 model b. Display ONLY Support System – Raspbian, Kali-linux, Ubuntu, Octopi..
Touchfunction Support System – only support Kali, Raspbian, Ubuntu, Octopie. The 4 inch display monitor with touch control function (need to install touch drive), we offer pre-install driver system image file. could be used as standard HDMI output device for computer display (no touch function)..
Packaging Content & After Sales – you will receive raspberry pi screen, raspberry pi heatsink, 30mm cooling fan, screwdrive, awesome looking, it can make your lcd display case looks cooler than others. if you encounter any problems, you can contact us at any time, and we will answer you..

Check Stock