Top Motor Drive Shaft Keys Reviews

uxcell 4mm Drive Shaft, L250mm Shaft, L200mm Sleeve, D36mm Propeller, Fit for 3.17mm Motor Shaft

The material OF SHAFT - stainless steel..
SIZE - suit for motor shaft diameter: 3.17 mm.
drive shaft size: 250 x 4 mm (length*diameter).
shaft sleeve size: 200 x 9.5 mm (length*outer diameter).
NOTE - there are bearings between the shaft and the shaft sleeve, it could hold on high strength and speed in a whirl..
APPLICATION - compatible with DIY model..
PACKAGE CONTENT - 1 x Drive shaft assemble kit..

Check Stock

Star 1/2 HP Submersible Well Pump with Carbon Steel Shell (3 Wire) 4 Inch, 230 Volt, 10 GPM, 4H10G05301

1/2HP 4 Inch submersible well pump with powder-coated and corrosion resistant carbon-steel shell and 1-1/4 Inch discharge that has a built-in check valve that is removable, internal, and positive-sealing.
Rated at 7 GPM water pumping capacity - Great for small homes, cottages and light water usage applications - requires a 4" (10 cm) minimum inside well diameter.
Quiet and economical operation with no priming required - Features a stainless steel motor shell and drive shaft for quiet operation and stainless steel hex drive shaft with one-piece stainless steel motor-to-shaft coupling.
NEMA standard 3 wire motor with ground wire - this 230 Volt well pump requires a control box (sold separately) and comes with a splice kit for completing all electrical connections.
100% Factory Tested - Will pump water from 100 feet.

Check Stock

Rough Country High Clearance Skid Plate for 1997-2006 Jeep Wrangler TJ - 1126

An extended rear CV Drive Shaft is required..
"Rubicon" models require Compressor Relocation Bracket (#1123) Does Not fit 97-02 6-Cylinder automatic transmission models - Requires different skid plate (#1120) Slip Yoke Eliminator (#50-7096 - Fits NP231 transfer cases only) and CV Drive Shaft are required "Rubicon" models do Not need SYE kit , but CV drive shaft is still required 1-inch Motor Mount Lift (#1156) is required 1.25-inch Body Lift Kit (#1157) is required.
Backed by Rough Country's Limited Lifetime Replacement Warranty..

Check Stock

YXT WB26X10143、SSM-16HR Oven Microwave Turntable Motor Carousel Synchronous Motor AC21V 3W 2.5/3 RPM （1 PCS）

Part Number： WB26X10143 SSM-16HR Microwave with "D" shaft Turntable Drive Motor （Shaft Diameter: 7mm/0.28in, Shaft Length: 9mm/0.35 in） Non-OEM,....
Electrical parameters: AC frequency: 50/60HZ voltage: 21AC power: 3W speed: 2.5/3r/min rotation direction: CW/CCW class: E When purchasing, please....
Replacement part number: WB26X10143 replacement (6549W1S011B, SSM-16HR, ).
Suitable brands/models: GE ST16FE EX73SAAA3 WB26X10143 and LG 721.63252301 721.63254301 MPDJ030BF JES35BJ JES738WJ02.
The drive motor is located under the glass microwave turntable. Before starting this repair, make sure to disconnect the microwave power. Just use a....

Check Stock

SSM-16HR Oven Microwave Turntable Motor Carousel Synchronous Motor AC21V 3W 2.5/3 RPM WB26X10143、6549W1S011B（1 PCS）

Part Number： Non-OEM,Microwave with "D" shaft Turntable Drive Motor（Shaft Diameter: 7mm/0.28in, Shaft Length: 9mm/0.35 in） SSM-16HR....
Electrical parameters: AC frequency: 50/60HZ voltage: 21AC power: 3W speed: 2.5/3r/min rotation direction: CW/CCW class: E When purchasing, please....
Replacement part number: WB26X10143 replacement (6549W1S011B, SSM-16HR, ).
Suitable brands/models: GE ST16FE EX73SAAA3 WB26X10143 and LG 721.63252301 721.63254301 MPDJ030BF JES35BJ JES738WJ02.
The drive motor is located under the glass microwave turntable. Before starting this repair, make sure to disconnect the microwave power. Just use a....

Check Stock

Tattoo Machine, Alloy Tattoo Machine Kit, Adjustable Liner & Shader Tattoo Machine, Rotary Tattoo Machine with Strong Motor RCA Interface for Tattoo Artists(Black)

【POWERFUL MOTOR】Strong power, direct drive motor with vertical eccentric shaft power output, high strength, better resilience and flexibility, imporve your working efficient..
【ADJUSTABLE OPERATION】Use adjustable direct drive eccentric shaft, can directly adjust the needle length, convenient and simple, to meet your different needs..
【PANIT FAST】Liner and shader function, help create exquisite tattoo pattern, help create exquisite tattoo pattern. strong motor make it paint fast..
【PREMIUM QUALITY&MULTI CHOICES】Adopts quality alloy material, safe and ecofriendly, firm and durable.
Multiple colors of tattoo machine are optional, you can choose according to preference..
【RCA INTERFACE】The machine equipped with standard RCA interface, suitable for clip cord of RCA plug..

Check Stock

DC Moter, DC12V Adjustable Speed DC Motor 180W Permanent Magnet DC Motor 2000RPM with Bracket (DC 12V 2000RPM)

[Excellent performance]: Permanent magnet DC motor drive is super stable, low noise, safe to use and stable in operation..
[Optional specifications]: Permanent magnet DC motors are available in two specifications, the rated voltage is optional 12/24 (V), with a high speed of 3500/6000rpm and a larger torque..
[Support CW / CCW rotation]: This high-speed DC motor can support CW / CCW rotation, and the speed is adjustable..
[Hollow shaft design]: The DC motor adopts a hollow shaft design. The fishing line can pass through the hollow shaft, which is very suitable for floating fish..
[Wide application]: This DC motor can be widely used in lawn mowers, polishers, cutting machines, electric drills, cotton candy machines, small generators, winding machines, bag cutting machines.

Check Stock

Gear and Sprocket Replacement Kit for Liftmaster 41c4220a, fits Chamberlain, Sears, Craftsman 1/3 and 1/2 HP Chain Drive Models (Chain Drive Gear and Sprocket Kit)

Kit Includes: Gear and sprocket, worm gear, grease, motor shaft bearings, sprocket bearings..
Compatible with Chamberlain, Sears, Craftsman and LiftMaster 1/3 and 1/2 HP chain drive models..
Compatible with chain drive Chamberlain Sears Craftsman manufactured operators 1984-current..
Installation: Step-by-step instructions included, free tech support available. This OEM kit 041c4220a includes all of the 41A2817 Drive / Worm Gear kit, and is easier to install because you do not have to disassemble the output shaft assembly - the spur gear is already mounted on the new output shaft..

Check Stock

Nisorpa Woodruff Key Set Metal 80pcs Metric Woodruff Key Assortment Half Moon Gear Shaft Drive Flywheel Key Pulley Crank Fasteners

These Woodruff Keys are made of high quality metal for stable and durable use.
Our Woodruff Keys is finished with a exquisite craf to provide a smooth surface, and the rounded shape design can relief of stress on the shaft during high speed applications.
Designed for pulleys and drive shaft applications, and they are suitable for hub adjustment.
Package comes with 8 different sizes, contains 80 pieces Metric Woodruff Key Assortment.
100% satisfactory guaranteed: A full refund or a new replacement can be arranged if the Woodruff Keys arrive faulty.Please kindly advise free for your concerns.

Check Stock

Traxxas 82024-4-Tan TRX-4 Sport: 4wd Electric Truck with TQ 2.4GHz Radio System

Traxxas 82024-4 - TRX-4 Sport 1/10 4x4 Crawler RTR, Tan.
Features: Tough, Lightweight Pickup Truck Body with Low profile bumpers for increased clearance Trail-Tuned XL-5 HV Waterproof Electronic Speed Control Powerful Titan 21T reverse rotation motor with internal cooling fan Portal Axles: Steel Gears, Improve axle geometry and reduce strain on driveshafts Rigid Steel Frame: 1.5mm thick steel frame rails increase torsional rigidity Drivetrain: Full-time shaft driven 4-wheel drive Innovative Battery Compartment: Hinged b.
Includes: (1) TRX-4 Sport RTR (1) Radio System (1) Motor (1) ESC Complete Instruction Manual.
Specs: Length: 21.93 Front Track: 9.78 inches Rear Track: 9.78 inches Wheelbase: 12.28" Front & Rear Shock Length: 3.54 inches (90mm) Chassis Structure / Material: Steel Ladder Frame with Nylon Composite Crossmembers Drive System: Shaft Driven 4WD Gear Pitch: 32P Hex Size: 12mm.
Part number(s) included (in factory packaging): 82024-4.

Check Stock

Adjustable Stroke Direct Drive Rotary Tattoo Machine RCA Cord for Liner Shader Tattoo Supply (Black)

Powerful 10V/10000rpm: Strong power, direct drive motor with vertical eccentric shaft power output, high strength, better resilience and flexibility..
For Comfortable Tattooing: Use adjustable direct drive eccentric shaft, can directly adjust the needle length, convenient and simple..
RCA Connection: Standard RCA interface, suitable for clip cord of RCA plug..
Great for Liner and Shader: Liner and shader function, help create exquisite tattoo pattern..
CNC Aluminium Frame: Adopts quality alloy material, safe and ecofriendly, firm and durable.

Check Stock

JAMRC Car Truck Buggy Brushless rc car 75+km/h 1 12 Wltoys rc car 124017 ver 2 High Performance Tunable Ready to Race RTR

[2845- 4300KV Brushless Motor] - The car comes with a 2845- 4300KV Brushless motor. It is super fast! Leave the others in the dust on road, off road,....
[Zinc Alloy Gear Set and Drive Shaft] - Engineered to last, the gears and drive shaft are composed of Zinc Alloy for wear resistance. It is made to....
[Aluminum Chassis and Shock Mounts] - Light weight and strong Aluminum chassis provides an extra strong base to prevent cracks and wear during....
[4x4 Wheel Independent Oil Shocks] - Real oil shocks made to effectively reduce vibration and/or bounce and keep the car sticking to the road. Keep....
[2.4Ghz Radio Frequency Control] - (blue controller) 2.4Ghz is great for distances up to ~100m. Its also great for areas with multiple cars in use.....

Check Stock

Makita 4114 14\ SJS™ Electric Angle Cutter

SJS technology is a mechanical clutch system that helps prevent motor and gear damage by allowing the drive shaft to slip if the wheel is forced to stop.
Rubber shield helps keep debris away from operator and from entering the motor.
Powerful 15.0 AMP motor delivers 3,800 RPM for the most demanding applications.
Removable base for a closer edge-to-edge cut.

Check Stock