Top Mold Parts Reviews

EZETES Silicone Mold Making Kit, Translucent Liquid Silicone Rubber for Jewelry, Casting, Resin, Sculpture Silicone Molds, Soap, Candle Making - 21.16 oz - 1:1 Mixing Ratio Molding Silicone

FAST CURING & NO BUBBLES – Depending on the Size of Your Silicone Mold it takes up to 12 Hours to Cure Completely at Room Temperature. All Bubbles will Disappear AUTOMATICALLY within 2 Hours. In case of spill – Clean with Soapy Water..
LOVE IT OR LEAVE IT: We Provide Only the HIGHEST QUALITY Products. If You feel unsatisfied with our Silicone Mold Making Kit for ANY reason, We will Happily Refund Every Penny, and keep the Mold Kit as our Gift to You!.
MULTIPURPOSE APPLICATION – Our Silicone Mold Kit is IDEALLY SUITED for Making Unique Casting, Resin, Wax, Candle, Soap Molds – Your Imagination is Your Limit! Note: The Mold Making Kit is not intended for Food Purposed Silicon Molds..
PREMIUM SILICONE RUBBER MATERIAL – Our Mold Kit Translucent Silicone is COMPLETELY SAFE, NON TOXIC and ODOURLESS! Boost Your Creativity by Adding Mica Coloring Powder if you want to bring more Color to Your Silicone Mold.
EASY TO USE & GREAT RESULT – PERFECT FOR BEGINNERS! – Our Silicone Mold Making Kit includes 2 Parts of LOW VISCOSITY Liquid Silicone – 1:1 Ratio. Pour Part A and Part B Together and Stir Thoroughly, the Working Time is 5 Minutes!.

Check Stock

Stainless Steel Commercial Ozone Generator UV Air Purifier 12000 mg/hr Industrial

...RUSES - The New Comfort EPA Certified Factory is one of the only factories in the world that creates UV & Ozone machines that are powerful enough to remove or reduce Mold, Bacteria, Viruses, and Powerful odors. In addition this SS7000 New Comfort Ozone Generator is made with corrosion proof Stainless Steel body and parts (unlike other cheap Ozone generators you see online). EPA Establishment Number 94263-CHN-1.
REMOVES MOLD AND VIRUSES - The New Comfort EPA Certified Factory is one of the only factories in the world that creates UV & Ozone machines that are powerful enough to remove or reduce Mold, Bacteria, Viruses, and Powerful odors. In addition this SS7000 New Comfort Ozone Generator is made with corrosion proof Stainless Steel body and parts (unlike other cheap Ozone generators you see online). EPA Establishment Number 94263-CHN-1.
POWERFUL OZONE GENERATOR / UV TREATMENT - The 03-7000 Commercial unit can produce a True 6000 mg/hr (low mode) or 12000 mg/hr (high mode). Produces an industrial level of Ozone (about 4x more than other cheap Ozone generators Claim). For its size and cost, this is one of the most powerful Ozone Generators / UV Air tratment units you can buy. If you do not need something this powerful check out our other New Comfort unit....

Check Stock

Mold Remover Gel, Mold Cleaner for Washing Machine Strips, Refrigerator Strips, Grout Cleaner for Tiles, Grout Sealant Bathroom Cleaning Home Kitchen Sinks Shower Cleaner

Powerful: Mold Remover Gel is the ideal solution to tough mold stains. You just take 5 minutes to apply the magic mold remover gel and 5-8 hours to wait for it, you can clean black stains on every corner of the house..
Safe: The mold remover is safe and environmentally friendly. You can use this household mold remover gel at home with confidence!.
Wide Range of Use: Our grout cleaner can be used in Refrigerator Silicone Seal, Washing Machine Seal, Refrigerator, Kitchen Sink, Wall Surface, Tile Grout, Bathroom, Silicone Sealant, washbasin, toilet bowls, wall surfaces, and so on..
Simple to Use: Rotate the lid first, tear off the white seal on the bottle, and install the tip. The nozzle tip is two parts. You need to rotate the lid before you can apply it. Applying the Mold Remover Gel to the mold area, wait for about 5-8 hours, and then wipe or wash away..
Satisfaction: We're so confident that you'll love our washing machine cleaner. if you have any problem with it, refund or replace a new one quickly, contact us at any time for help..

Check Stock

Mukool Sand Molding Toys 42pcs Mold Activity Set Compatible with Kinetic Sand Any Molding Sand

Includes: 6 big Castle Molds and 6 Small Mold , 6 Sealife Forms ,8 Animal Forms , 5 Building Forms , 7 Piece For A Funny Toys , 4 Piece Mold Tools (Color & Style Varies).
Molds Easily Into Any Shape!You Can Use This Mold For Kinetic Sand ,For Sand Alive ,For Amazing Sands Or moon sands ,Compatible With Any Molding Sand !.
CHOKING HAZARD: Small parts. Not for children under 3 yrs..

Check Stock

GlobMarble Concrete Countertop Mold Edge Form CEF 7010. Liners Edge Profile. 2\ Width

CONCRETE COUNTERTOP EDGE FORM CEF 7010 RUBBER MOLD FORM LINERS EDGE PROFILE 8 FT..
GlobMarble molds are designed to produce many parts and will last you many years by using a little common sense and incorporating a maintenance plan. The concrete countertop mold edge forms are extremely flexible and easily wrap around corners without mitering and can also be used on plywood or melamine to free form any shape of table or countertop. Trim to length with a standard razor knife..
Concrete countertop mold edges come in a variety of shapes and sizes. Because concrete will take the shape of virtually any form or mold it is cast into it's possible to produce the look of stone, rope edges, vines, and more.The concrete countertop mold edge forms are made of high strength, 40 Durometer urethane rubber that with proper care will offer a lifetime of use..
ALL TAXES, DUTIES AND LOCAL FEES AT THE DESTINATION COUNTRY WILL BE PAID BY BUYER. OUR SHIPPING COST INCLUDES DELIVERY TO A DESTINATION ADDRESS ONLY. ALL GLOBMARBLE PRODUCTS ARE SHIPPED FROM THE UNITED STATES.

Check Stock

New Silver Black Fairing Fit for YAMAHA 2002 2003 YZF R1 Injection Mold ABS Plastics Aftermarket Bodywork Bodyframe 02 03

1.Injection Mold Fairing Fit for YAMAHA 2002 2003 YZF R1.
2.Package includes: front nose+ both sides fairings+ front fender+ tail fairings+ black unpainted inner pieces.
4.Color: Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
Holes and tabs are built into the mold and align to Factory Settings.

Check Stock

MILIVIXAY Cylinder Candle Mold Set-4PCS Pillar Candle Molds - Plastic Candle Molds for Candle Making-Candle Making Molds-120 Ft. of Wick 2 Wick Clips and 2 Wick Holders Included as a Gift.

CANDLE MAKING SUPPLIES SET: The Kit Includes 4 Plastic Сylinder Molds of Various Sizes, Three 30 Ft Long Wicks, 2 Metal Wick Clips,2 Metal Wick Holders and A Guide To Candle Making..
PILLAR CANDLE Mold: The Mold Is Made of High Quality Pc Material. It Can Withstand Frequent Usage.the Shape of The Mold Is Made Specifically Upon Our Customers’ Request, Who Asked To Have The Mold of this Shape Separately From the Whole Spectrum of them..
CYLINDER CANDLE MOLD: The Mold is Constructed of two Separate Parts: The Core Part and The Lid, To Make It Convenient To Take Out A Candle. This Mold Can Be Used for Paraffin, Wax, Beeswax Candle Making..
MODE SIZES: №1: height: 5.98 in diameter: 1.96 in, Wax Needed 8.82OZ,№2: height: 2.95 in, diameter: 1.96 in, Wax Needed 4.24OZ,№3: height: 5.90 in, diameter: 2.36 in, Wax Needed 12.35OZ,№4: height: 2.95 in, diameter: 2.75 in,Wax Needed 8.46OZ..
PERFECT MOLD SET for CANDLE MAKING – Ideal Gift for Beginners or Advanced Candle Makers.
Just Make Your Own Candles At Home with four Molds! The Unique Candles You Make Definitely Will Be A Big Surprise for Your Family or Friends as A Gift..

Check Stock

Bracelet Bangle Resin Silicone Mold (3 Piece Set) DIY Dry Flower Epoxy Resin AB Glue Ring Mold, Used for Resin Ring, Bracelet Jewelry, Necklace Pendant Making, Epoxy Resin Craft Decoration Products

...racelets, keyring, home decorations and so on. How to use: Pour the dropping glue into the cup and then into the mould. Dropping gum into the mold to be flat, and then cover the mold with a shield to avoid dust falling into. Wait for the dripping glue to be completely dry, then take out the articles, and polish the parts that need to be polished until smooth..
High quality silicone resin jewelry molds material of silicone, which is flexible and smooth. Screw eye pins are made of metal alloy, stirrers, droppers and spoons are made of quality plastic, hand twist drill is made of stainless steel..
This re-usable resin casting mold set is a good choice for you to share your handicraft with your friends and family, enjoy your happy times together, and it would make a perfect gift for any of the crafty people in your life. Note: The maximum temperature of the molds can withstand is 220℃ (428℉). .

Check Stock

Untrammelife 3-Light Gold Pendant Light 13" Large Globe Pendant Light Fixture with Hand Blown Seeded Glass Shade Single Hanging Chandelier for Kitchen Island Sink, Brushed Brass

...be is individually blown by a skilled artisan. All blown glass will have a pontil mark. Molded glass, which is the same as pressed glass, will not have a pontil mark on the bottom, and it will have mold seams present somewhere on the piece. The mold seams are usually found on the sides of glass where the parts of a glass mold fit together whether in two or three parts..
ADJUSTABLE METAL CHAIN - The length of this gold Ceiling Light Fixture’s chain is 74 inch and can be changed according to your preference and design. Flat, sloped and vaulted ceiling are compatible. This vintage pendant light will be a perfect choice for your kitchen island, dining table, living room, foyer and hallway.
BULB REQUIREMENTS - Our glass globe pendant light fixture are compatible with need 3 x E12/candelabra-base light bulbs, 60W Max for each. Compatible with dimmable bulb and switch (Bulbs and switch are NOT included).
ETL CERTIFIED & THREE YEARS WARRANTY - Customized mold package keep your products safe. All accessories are under ETL Certification. If you have any queries, please CONTACT US via Amazon message box any time.

Check Stock

Fairing Blue White Fit for SUZUKI 2011-2020 GSXR 600 750 Injection Mold ABS Plastics Aftermarket Bodywork Kit Set 2012 2013 2014 2015 2016 2017 2018 2019 GSX-R 600/750 YTL001

1.[Fit for] SUZUKI 2011-2020 GSXR 600 750.
2.[Complete Pieces Included] front fairing + left & right side fairings + half tank cover+ front fender+ tail fairing+ unpainted black trim parts.
Holes and tabs are built into the mold and align to Factory Settings.
Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
5.[Attention]Instructions are Not Included.Highly Suggest Fairing be Installed by Professionals..

Check Stock

Silicone Ashtray Mold for Resin Kit, Square Silicone Ashtray Mold and Octagon Ashtray Resin Molds with Resin Glitter for Resin Casting Beginners

ENOUGH RESIN FOR BOTH ASHTRAY MOLDS: This ashtray mold for resin pack also come with 200g crystal resin for casting, its enough resin to make 2 full ashtrays. This resin works really well, as it is easy to use and mix. Hardened within 24 hours perfectly, very nice resin for beginners. Make sure to use equal parts of the resin and the hardener, or it won't cure properly..
STURDY ASHTRAY MOLDS & NO RIPPING: These silicone ashtray for resin are made of high quality silicone, which is soft and flexible, sturdy enough to keep its shape, silicone ashtray epoxy molds are reusable will last for a long while! When releasing it wont be ripped or teared in any places and no sticking..
SUPER EASY TO USE & REMOVE: Super easy to use for a beginner, these ashtray molds for resin worked great, when removing carefully, they cured nicely and released easily, easy to customize your personal ashtrays. This ashtray silicone mold for resin kit is perfect for anyone, for yourself and as a gift!.
PERFECT SIZE & GREAT SHAPES: Comes with square ashtray mold and octagon ashtray mold, two shapes ashtray resin mold are excellent size which work perfectly to made super cute ashtrays. Make your personal resin ashtrays now! it is also a very fun and creative activity with you ....

Check Stock

Plastic Yellow Black Bodywork Fairing Fit for Kawasaki Ninja 2006 2007 ZX10R ZX-10R Injection Mold ABS Aftermarket Bodyframe Kit Set 06 07 06ZX10R

1.[Fit for] Kawasaki Ninja 2006 2007 ZX10R ZX-10R.
2.[Complete Pieces Included] front fairing + left & right side fairings + front fender+tail fairing+ rear seat cowl+ unpainted black trim parts.
Holes and tabs are built into the mold and align to Factory Settings.
Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
5.[Attention]Instructions are Not Included.Highly Suggest Fairing be Installed by Professionals..

Check Stock

Plastic Yellow Bodywork Fairing Fit for Kawasaki Ninja 2007 2008 ZX6R 636 ZX-6R Injection Mold ABS Aftermarket Bodyframe Kit Set 07 08 07ZX6R

1.[Fit for] Kawasaki Ninja 2007 2008 ZX6R 636 ZX-6R.
2.[Complete Pieces Included] front fairing + left & right side fairings + front fender+tail fairing+ unpainted black trim parts.
Holes and tabs are built into the mold and align to Factory Settings.
Fairing will be as the pictures show, and may NOT match the color of OEM or your original parts..
5.[Attention]Instructions are Not Included.Highly Suggest Fairing be Installed by Professionals..

Check Stock