Top Miter Saw With Laser Reviews

Metabo HPT Sliding Compound Miter Saw | 12-Inch Blade | Double Bevel | Laser Marker | 15-Amp Motor | 5 Year Warranty | C12RSH2S

  • AWARD: Rated Best Miter Saw for the Money for Pros by Pro Tool Reviews 2022.
  • MOTOR: Powerful 15 Amp motor to tackle tough cutting jobs with ease.
  • LASER: Laser marker system from Metabo HPT increases cutting accuracy.
  • FENCE: Large sliding fence raises fence height to 5.125 In. to cut up to 7.5 In. crown molding vertically.
  • MITER: 0-57 degree miter angle to the right and 0-45 degree to the left for flexibility.
  • BEVEL: 0-45 degree bevel angle range to the right and left allowing users to quickly and easily flip the saw blade and leave the material in place.
  • SCALES: Positive stops and indications on the miter and bevel scale, for easy to read measurements and quick settings.
  • HANDLE: Vertical handle with soft, vibration reducing elastomer grip adds comfort and control.
  • SLIDE: Compact slide system allows the saw head to slide along fixed rails, for zero clearance.
  • WARRANTY: Covered by Metabo HPT's Professional 5-Year Tool Warranty.
Check Stock

BullnoseBoss - Bullnose Corner Marking Tool

  • Precise and Accurate - The 505P-7 is a 175mm (7") Plastic Saw Miter Protractor that is made from a durable hardened plastic that has markings which provide accurate angle calculations for transferring and making cuts with the utmost precision..
  • Easy To Use - Starrett protractors are an easy-to-use cutting guide for carpenters, plumbing, builders, and any DIY home improvement jobs. They have two laser engraved scales and a smooth pivot assembly for precise operation..
  • Miter Cut & Single Cut Transfers - Our protractors offer miter cut scale transfer readings which go directly to the miter saw for miter joints and single cut scale transfers readings for butt joints..
  • Everything You Need - Cut down your work time and reduce waste by using Starrett's top of the line protractor. It's durable scratch resistant design is ideal for any workplace and construction job..
  • Measure Right The First Time - Our protractors will simply set your saw to the right angle. Upside down or backward, rest assured that you will always get the correct reading..
Check Stock

Genuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10

  • ... 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient. ​Additional trim blocks raises working efficiency. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle..
  • Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. The adjustable, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22.5, 30, 45, 60 and 90 degrees..
  • Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting..
  • Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free..
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for router tables and jointers. Miter gauge fence sys....
Check Stock

Gohelper Miter Saw Protractor Angle Finder Tool Guide case, 7 inch Aluminum Measuring Miter Gauge Protractor Inside & Outside Corner Angle Finder Protractor for Woodworking, Metal, Crown molding

  • Accurate Measurement: The miter saw protractor angle finder provides two scales: single cut and miter cut, external scale to measure a single cut and internal scale to measure a miter cut, conversion table which allows values of the spring and corner angles being converted into mitre and bevel angles..
  • Exquisite Craftsmanship: The O-ring design makes the saw protractor angle finderrotate full 360 degrees, ensures mitre saw protractors fit the corner smoothly when doing measuring operation, precise read on inside or outside corners. precision laser engraving scale ensure the dial is clear and easy to read..
  • Excellent Material: The miter saw protractor tool is made of aluminum alloy, which has strong wear resistance and corrosion resistance, expand itself service life, 7inch size and lightweight material makes it easy to carry..
  • 4. Wide Applications: the miter saw protractor guide can perform applications, such as measuring external angles, measuring internal angles, and measuring height angles, it is suitable for saw protractor for woodworking, metalworking, miter single cut, miter cut, crown shaped, pipe, and other carpentry applications..
  • Quality Assurance: We have great quality aluminum saw protractor, if you have any questions or problems in the proce....
Check Stock

GENERAL INTERNATIONAL 7-1/4" Compound Sliding Miter Saw - 10A Dual Slide Rail Chop Saw with 0-45° Bevel & Laser Alignment System - MS3002

  • 7.25 INCH COMPOUND MITER SAW - This powerful yet compact saw features a 7.25" carbide tooth blade for fast, easy cross-cutting of dimensional lumber as large as 2x8.
  • POWERFUL 10 AMP MOTOR - Powered by a robust 10 amp motor this miter saw has a max no load speed of 5000 RPM and is capable of cutting through some of the toughest job site materials..
  • BEVELS FROM 0-45 DEGREES - Make bevel cuts up to 45 degrees left, or miter cuts up to 45 degrees left and right. Ideal for everything from framing to finish work..
  • ACCURATE LASER GUIDED CUTTING - When precision is key to your jobs success, look to the integrated laser alignment system to help you produce fast, accurate cuts ..
  • DUAL RAIL SLIDING SYSTEM - The two rail sliding system enhances rigidity and provides extra capacity when making long crosscuts, miter cuts and bevel cuts..
Check Stock

Starrett Miter Saw Protractor, Prosite 505P-7, Angle Finder Gauge Cutting Guide Tool with Laser Scales for Carpenters, Plumbers, Building Trades, DYI Home Improvement, 7” Narrow Plastic

  • PREMIUM PROTRACTOR: The Prosite 505P-7 is a 175mm (7") Plastic Saw Miter Protractor that provides accurate angle calculations for transferring and making cuts with the utmost precision.
  • EASY TO USE: This measuring tool is an easy to use cutting guide for carpenters, plumbing, builders, and DIY home improvement jobs.
  • MITER CUT & SINGLE CUT TRANSFERS: The miter cut scale transfers readings directly to the miter saw for miter joints.
  • The single cut scale transfers readings straight to the miter saw for butt joints.
  • SAVE TIME & REDUCE WASTE: Using an effective protractor like this model, which is made from durable 7-inch hardened plastic, cuts down on working time and helps you to reduce waste.
  • PERFECT FIT: Simply set your saw to the angle that you read on the protractor.
  • Upside down or backward, rest assured that you will always get the correct reading.
Check Stock

Miter Saw, SMADRON 12inch Double-Bevel Sliding Compound Glide Miter Saw, Chop Saw with Laser marker, 15Amp Motor, 40T Blade for Wood Cut

  • 【Compound Miter Saw with Powerful Motor】The 15-amp/1800W with 3800rpm motor delivers high power to smooth and fast cutting on carpentry work. And the 12-inch blade comes with sharp 40 teeth makes easy work of cutting and bevel cut. An ideal tool for fine woodworking, carpentry, general construction, and more..
  • 【Double Bevel Saw】The double bevel design enables the saw to bevel around 0-45 degrees and the miter angle be in a range of -45-0-45 degrees, that can meet different bevel cutting needs. The cut capacity up to 4.13x13.19 inches at 90 degree and 2.36x13.19 inches at 45 degree, offers more possibilities for your work than a single-beveled miter saw..
  • 【User-Friendly Design】With 2 extendable side pieces, the miter saw offer a larger work table to meet your requirement of large pieces cuts, and the clamping device system helps for better material support to secure work piece. An efficient dust bag is equipped to collect more than 70% of the dust produced, keeping your work environment clean and tidy..
  • 【Precision & Safety】Adjustable miter scale with precise stops (-45°/-30°/-22.5°/-15°/0°/+15°/+22.5°/+30°/+45°) ensures clean and accurate bevel cuts. Built-in visible laser indicator for increased cutting accuracy and predictable ....
Check Stock

Oumefar Aluminium Alloy Miter Bar Slider Table Saw Tie Rod Gauge Rod General Guide Rail Slide Table Saw Accessories Woodworking Tool Durable in Use(450 Slider)

  • Wide Application: Miter saw protractor #505P-7 replacement widely use in woodworking, plumbers, and all building trades..
  • Laser Dial:Laser carving dial, accurate and clearly Dial, easy to read, use velvet bag packaging, well protect the dial..
  • 7.3 Inch Miter saw protractor, you can put it in the bag or pocket, easy to carry..
  • 360-Degree Measurement:360 - degree rotation can measure different angles.Inside & Outside miter angle finder..
  • Simple Operation: Direct read, setting the cut saw angle.But It's not an instrument that measures the angle of bending, it just helps you cut some standard angles..
Check Stock

POWERTEC 71143 Deluxe Miter Gauge for Table Saw | Miter Guide with 120 Angle Stops

  • Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • Features: a lightweight design with a durable laser-cut aluminum construction, Large gauge handle, universal fence mounting bracket pivoting locking mechanism, A removal plate that allows the miter gauge to be used with t-slotted and non t-slotted miter slots, and adjustable Expansion discs that remove all side play from the bar, creating a perfect fit.
  • Precision: angle guide (with 120 total angle stops) in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • Universal design:suited for most standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular Brand table saws, band saws, Router tables, disk and belt sanders.
Check Stock

Starrett 11H-6-4R 6” 2 Pc Combo Square w/Cast Iron Head Black Wrinkle Finish

  • Miter cut (for miter joints): transfer readings directly to the miter saw.
  • Single cut (for butt joints): transfer readings directly to the miter saw.
  • Protractor (Reverse side of tool): the actual angle on two scales: 0-180-0 degree and 180-0-180 degree.
  • With the tool face down, a quick 5. reference to common roof pitches can be determined by matching the leg of the tool to the lines on the roof pitch....
  • New upgraded design includes laser engraved dial for exceptional accuracy.
Check Stock

POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops

  • FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit..
  • PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots..
Check Stock

POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” Multi –Track Fence with 27 Angle Stops

  • Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop.
  • Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results.
  • High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right.
  • Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts.
  • Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.
Check Stock

Miter Saw Protractor Replace the Model #505P-7,Miter Angle Finder with Laser Dial for Carpenters, Plumbers and All Building Trades Also Invaluable for Home Use and Do-It-Yourselfers.

  • Wide Application: Miter saw protractor #505P-7 replacement widely use in woodworking, plumbers, and all building trades..
  • Laser Dial:Laser carving dial, accurate and clearly Dial, easy to read, use velvet bag packaging, well protect the dial..
  • 7.3 Inch Miter saw protractor, you can put it in the bag or pocket, easy to carry..
  • 360-Degree Measurement:360 - degree rotation can measure different angles.Inside & Outside miter angle finder..
  • Simple Operation: Direct read, setting the cut saw angle.But It's not an instrument that measures the angle of bending, it just helps you cut some standard angles..
Check Stock