Top Table Saw Miter Gauge Reviews

POWERTEC 71143 Deluxe Miter Gauge for Table Saw | Miter Guide with 120 Angle Stops

  • Function: a high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • Features: a lightweight design with a durable laser-cut aluminum construction, Large gauge handle, universal fence mounting bracket pivoting locking mechanism, A removal plate that allows the miter gauge to be used with t-slotted and non t-slotted miter slots, and adjustable Expansion discs that remove all side play from the bar, creating a perfect fit.
  • Precision: angle guide (with 120 total angle stops) in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • Universal design:suited for most standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular Brand table saws, band saws, Router tables, disk and belt sanders.
Check Stock

POWERTEC 71142 Universal Table Saw Miter Gauge Assembly/Miter Gauge with 27 Angle Stops

  • FUNCTION: A high performance woodworking angle tool that possesses a miter guide which mounts into the miter slots of your table saw (band saws and other applications) and then guides the miter gauge parallel to the blade for high precision angled and crosscuts.
  • FEATURES: A lightweight design with a durable laser-cut aluminum construction, large gauge handle, universal fence mounting bracket, pivoting locking mechanism, a removal plate that allows the miter gauge to be used with T-slotted and non T-slotted miter slots, and adjustable expansion discs that remove all side play from the bar, creating a perfect fit..
  • PRECISION: Angle guide with 27 total locking stops in 5 degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts.
  • UNIVERSAL DESIGN: Works with most Contractor style, full sized saws, or tools with standard miter slots (3/4” width x 3/8” depth) with or without T-slots, making it compatible with popular brand table saws, band saws, router tables, disk and belt sanders. PLEASE NOTE : will not work with smaller saws or tool with 5/8” miter slots..
Check Stock

Fulton Universal Aluminum Miter Gauge Fence with an Aluminum Flip Stop 18” Left Reading Tape 18” Right Reading Tape

  • When cutting mitered angles with your table saw you always want to make sure that have enough support of your stock when feeding it through the blade. The table saw blade is rotating toward you at a high rate of speed and if your workpiece moves to the side, the result can be scary and downright dangerous. With the help of a miter gauge and with our Aluminum Miter Fence secured to it, you will have full support all the way up to the blade on most of your miter angle cuts..
  • The Aluminum Miter Fence has been cut at 45 degrees on both ends of the fence. Doing this allows you to get as close to the blade as possible so your workpiece is fully supported throughout the cutting process. Straight cut or 90 degree cut fences have a large gap between the fence and the blade because it can not get as close with the straight cut ends on the fence..
  • Many times when we make miter cuts on our table saw, we need 2 or more pieces that are the exactly same length. While using the included measuring tapes that are included are pretty good at this, we have also included a handy flip stop that locks into any location along the length of the fence. This allows you to make repetitive length cuts without worrying if the pieces will end up the same. The flip stop can can simpl....
Check Stock

Fulton Precision Miter Gauge with Aluminum Miter Fence with 45 degree Angled Ends for Maximum Stock Support and a Repetitive Cut Flip Stop

  • The Fulton Miter Gauge is a high quality, well thought out and economical solution for your table saw cross cutting needs.The Aluminum Miter fence is equally well thought out with its 45 degree ends for unsurpassed workpiece support and its ability to mounted to most any miter gauge. Also included is a handy aluminum flip stop for repetitive angled cuts on your table saw. Together these three items are the perfect compliment to each other for your table saw cutting needs..
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used.To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place..
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot (slight variances from brand to brand) running the length on the bottom of the slot. The steel miter bar is equipped with a met....
Check Stock

Genuine Ryobi 089037007707 Miter Gauge Assembly Fits RTS10

  • Precise Angle Cutting: This table saw accessory is 0.04 inch / 1 mm high precision. Metric and imperial scale makes your work more convenient. ​Additional trim blocks raises working efficiency. Both sides 60 angle adjustable, ideal for crosscutting wood at a specific angle..
  • Compatible Standeded Slot: Our table saw sled is suitable for a standard 0.75 x 0.38-inch miter slot. Laser marking technology is friction-resistance to ensure accuracy. It is an economical solution for your table saw crosscutting needs. The adjustable, solid aluminum head is machined with 11 positive stop holes. 1 hole is at 90 degrees while the 5 holes on both sides are at 10, 22.5, 30, 45, 60 and 90 degrees..
  • Premium Sturdy Construction: This woodworking tool is made of aluminum alloy, ensuring its durability and sturdiness. The steel miter bar is equipped with a removable metal retaining disc to prevent accidental lifting..
  • Simple & Secure Operation: An adjusting screw and guide wheel are added in the middle, which is more convenient to insert into the slot hole and fix the seat. The miter gauges are flat without burr, secure, and hands-free..
  • Wide Application: The table saw miter can improve the safety and accuracy of the table saw and the router table. It also can be used for....
Check Stock

Rockler 36'' Miter Track - Miter Slot Fits 1' x 1/2' Deep Dado & Accepts a Standard 3/4' x 3/8' Miter Bar – Premium Grade Anodized Aluminum Miter Track Slot – Comes Pre-Drilled, Countersunk w/ Four Holes

  • Rockler 36'' Miter Track Bar: Our 36” inch miter slot track expands the use of the router table by providing the use of many sleds, clamps, jigs, and other woodworking devices..
  • Perfect Application: Set up your jigs, fixtures, and shop-made router tables for a perfect smooth-sliding miter gauge. This is the ultimate table saw miter track to build your own custom table saw or router table..
  • Perfect Size: The track fits into a 1" x 1/2" deep dado and accepts a standard 3/4" x 3/8" miter bar. Adjusts for perfect sliding action in any standard miter gauge track with just a twist of the wrist..
  • Durable Material: Our woodworking jig miter slider is constructed of 100% aluminum for excellent durability without the weight..
  • Easy Install: For fast, trouble-free installation, the miter slot gauge comes pre-drilled and countersunk with four holes for #6 mounting screws (not included)..
Check Stock

Fulton Precision Miter Gauge with a Standard Slot (3/4” x 3/8”) Steel Bar with Adjustable Spring Loaded Plungers and Removable Retaining Disc

  • If you own a table saw and you need to make a crosscut at any angle then you know how valuable a miter gauge can be. You may also know that the miter gauge that came with your saw is not terribly accurate or durable. Not to mention that the fit in the miter slot may not be all that great as well. The Fulton Miter Gauge is a high quality, well thought out and economical solution to your table saw cross cutting needs..
  • The .200” thick, adjustable, solid aluminum head is machined with 13 positive stop holes. 1 hole is at 90 degrees while the 6 holes on both sides are at 22.5, 30, 45, 60, 67.5 and 90 degrees. The positive stops are perfect for many woodworking projects as they are the angles that are typically used..
  • To adjust the head you simply loosen the post knob handle, pull the spring loaded indexing pin outward, rotate the head to the desired position, release the pin and lock into place by tightening the post knob handle. The aluminum head has two ¼” x ½” slots milled into it for mounting a miter fence if so desired. The slots are approximately 1-1/8” from the base of the miter gauge head..
  • The head is mounted to a solid steel miter bar that measure 18” in length and is .354” thick by .730” wide. Standard miter slots are 3/4” x 3/8....
Check Stock

Miter Bar, 1Pcs Durable In Use Aluminium Alloy Miter Bar Slider Table Saw Gauge Rod Wood Working Tool Suitable for Jigs Fixtures Sleds Router Tables and General Woodworking, 300 mm / 11.81 inch

  • Wide Applications : This is a miter bar usually used in table saw woodworking works, for building various jigs on your table saw, like miter sleds etc..
  • Convenient to Use : Universal threaded mounting holes for convenient use. Includes plans for a wide variety of shop-made jigs and fixtures. Adjustable stainless steel runner for perfect sliding action.
  • Good Performance : Adjusts for perfect sliding action in any standard miter gauge slot with just a twist of the wrist. Locks securely in any standard miter gauge slot with another twist of the wrist.
  • Useful and Practical : For building various jigs on your table saw, like miter sleds. Includes threaded mounting holes and hardware for easy attachment to any application.
  • Fine Quality Aluminium Alloy Material : Made of high quality aluminium alloy, this miter bar is of strong strength and reliable durability for several year using without abusing.
Check Stock

UOKRR Precision Miter Gauge for Table Saw Craftsman Telescoping 20" to 36" Aluminum Miter Fence Repetitive Cut Flip Stop 60° Angled Ends for Maximum Stock Support

  • ...raved scale and 9mm thicken plate, it's not easy to deform and with the features of 0.001 inch / 0.02mm high-accuracy. 20" to 36" Telescoping aluminum miter fence with striking metric and imperial scale design will more convenient for your operation, come with a aluminum flip stop for repetitive angled cuts on your table saw..
  • Compatible Standard Slot: The length of the miter bar is 19.68", and its slid smooth and perfect fit the guide rail for your table saw, the miter gauge fits standard miter slots are 3/4” x 3/8” with a 1/8” “T” slot, and it can be installed on most table saws..
  • Tool Free Installation: The miter gauge is very easy to setup and locking by manually turning the knob, made of premium aluminum alloy with its surface treated by CNC-machined anodic oxidation, which has higher wear resistance, the surface has been deburred and smoothed, no need to worry about cutting your hands..
  • Our Service: We provide 2 years warranty for our miter gauge, free return or replacement within 30 days, please feel free to contact us if there will be any problems, we will give you a satisfying solution ASAP..
Check Stock

JOUNJIP (3) 2-5/16” HSS Blade Bundle with Mini Miter Cut-Off Chop Saw

  • ...w】- Make miter cuts from 0° to 45°. Cuts to a depth of 1/2 in. – ideal for frames and molding. High Speed-7800 RPMs cuts .273/ 5.56/ .300 blackout AAC brass cases, light metals and wood dowel..
  • 【High-Precision】- This 110V mini chop saw is so accurate that you might never have to file or sand ends! Has adjustable miter gauge for cutting soft metals, wood, plastic and other light materials, perfect for all your DIY projects..
  • 【Precise Smooth Cuts】This mini cut off saw carbon arrow cutter is so accurate that you might never have to file or sand ends! Cuts wood, brass & similar light materials with smooth, precise cuts. Ideal for Small Hobby and DIY Crafts..
  • 【Multi-Purpose】 Small miter saw table saw with adjustable miter gauge, 100T HSS saw blade for cutting soft non-ferrous metals, wood, plastic and other lightweight materials. 2 inch Black Cut-Off Wheel are designed for cutting fiberglass, steel, stainless steel, and other ferrous metals for aggressive cutting action. Perfect for carbon steel, carbon arrows, and mini general purpose metal cutting..
  • 【Quality Service】We guarantee to provide you with the most satisfactory shopping service, no matter if you have any questions about our product,you are welcome to contact our customer servi....
Check Stock

Husqvarna K4000 Cut-N-Break Saw Orange

  • [SETS UP IN SECONDS] Take this table saw to the job site or move it around the workshop. There’s even a built-in carry handle.
  • [CUTS LIKE A FULL-SIZE] With the standard guard and riving knife system you can perform rip, cross, scroll, and miter cuts.
  • [TOOL-LESS BLADE CHANGE] Uses any brand’s standard 4” T-shank blade, but we threw 5 in the box to get you started cutting wood, ceramic tile,....
  • [0-60° MITER CUTS] With the adjustable gauge you can pull off precise miter cuts for a whole assortment of woodworking projects.
  • [ON-BOARD ACCESSORY STORAGE] When the miter gauge, rip fence, and extra blades aren’t in use they can be conveniently housed in the base of the saw.
Check Stock

POWERTEC 71391 Table Saw Precision Miter Gauge System 24” x 3” Multi –Track Fence with 27 Angle Stops

  • Includes: (1) table saw miter gauge, (1) multi-track miter fence, (1) t-track flip stop.
  • Function: cost effective 3-piece set designed to give you everything you need to produce higher precision cuts (including cross cutting) while quick and accurate project results.
  • High precision miter gauge: features 27 angle indexing stops with 1-degree step spacing and positive stops at 0°, 10°, 22½°, 30° and 45° and nine others, both left and right.
  • Multi-track miter fence: smooth, laser engraved scale, extruded aluminum profile with a universal design that accepts accept 1/4"-20 hex Bots, 1/4” t-bolts and 5/16” T- bolts.
  • Miter saw flip stop: delivers exceptional cut-length control, with a convenient locking mechanism and an adjustable setting to work from left or right.
Check Stock

The Original Dubby Cut-Off • Cross Cut Sled for Cutting Precise Accurate Miters with a Table Saw (Left Side Dubby Sled)

  • ...t is ideal for making frames but it also works very well for the cutting of tiny pieces while keeping your fingers out of harms way..
  • WORKING WITH LARGE PANELS The Dubby has the capacity to crosscut panels up to 24″ wide x 52″ long, and allows you to do them safely. Since the panels don’t make contact with the table saw top, “walking” of the material is virtually eliminated. This will allow you to cut perfectly square panels for your furniture and cabinet making projects quickly, easily and accurately..
  • WORKING WITH ANGLES The Dubby angle scale is the simplest, most accurate and easiest to read scale available. Being about 15-20 times more accurate than the average miter gauge, the scale has pre-determined lines for any shape (from 4 to 16 sides) you want to cut. This means no calculations, no hassles, and best of all, no test cuts for perfect results.
  • WORKING WITH SMALL PIECES- No miter gauge on the market can offer you the margin of safety provided by the Dubby Sled. The versatile hold-down clamp included with every Dubby will give you an extremely safe way to cut small pieces, and will easily pivot out of the way when you don’t need it. With 35lbs. of hold down pressure, the clamp will hold small pieces all the while keeping your hands an....
Check Stock