Top Mining Bevel Gear Reviews

Bevel Gear 1.5 Modulu 15/30 Teeth, Tapered Bevel Pinion Gear Hole Diameter 90 Degrees Tapered Bevel Motor Driving Metal Gear

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Boston Gear L149Y-G Bevel Gear, 2:1 Ratio, 0.500\ Bore, 16 Pitch, 32 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (10mm)

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

FoxAlien CNC Router Machine 4040-XE, 300W Spindle 3-Axis Engraving Milling Machine for Wood Metal Acrylic MDF Nylon Carving Cutting Arts and Crafts DIY Design

  • 1.Bronze bevel gear generally has better corrosion resistance, abrasion resistance, casting and excellent mechanical properties..
  • 2.This not only increases durability and longevity but even reduces noise over time..
  • 3.The straight type bronze gear is designed to used with power feed milling machine as long as the direction of the tooth is same..
  • 4.This compact bevel gear is easy to install with some small or large shim..
  • 5.The gears include bronze gear and iron gear are milled by pricing milling skill for high precision and accuracy..
Check Stock

CNBTR 45# Steel 1.5 Module 12 Teeth 8mm Hole Dia Tapered Bevel Gear Wheel for Mechanical Accessories Pack of 2

  • Tapered Bevel Gear Wheel, 1.5 Modulus, 12 teeth, 8mm hole diameter..
  • Made of 45# steel with high wear-resistance, strong and durable..
  • Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc..
  • Description: 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
  • Scope of application: for all kinds of mechanical transmission occasions..
Check Stock

CNBTR 45 Steel 1.5 Modulus Silver 10mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2

  • [Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 10mm hole diameter, 22mm overall length. Please confirm the correct size before purchasing..
  • [Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
  • [Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
  • The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
  • Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..
Check Stock

CNBTR 45 Steel 1.5 Modulus Silver 8mm Hole Diameter Tapered Bevel Gear Wheel 20T Pack of 2

  • [Product Type] Tapered Bevel Gear Wheel, 1.5 Modulus, 20T, 8mm hole diameter, 22mm overall length, Maximum Outer Diameter: 31.6mm/1.24". Please confirm the correct size before purchasing..
  • [Material] Made of 45 steel material, not easy to wear, durable and lasting performance. This gear is an excellent industrial replacement accessory..
  • [Application] Used widely in conveying, hardware, agricultural equipment, printing machinery, automotive applications, mechanical transmission, etc..
  • The contact between the gears is firm, which ensures the normal operation of the machine and good bearing capacity..
  • Note: 1:1 bevel gear (can only be matched with 1:1, can not be matched with gears with other modules and T numbers)..
Check Stock

Yibuy 2 PCS 45# Steel 16 Teeth 1.5 Module 8mm Hole Diameter Bevel Gear Wheel

  • 64 teeth for use with G486Y-P mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

T159348 Axle Bevel Gear Aftermarket for John Deere Backhoe Sub. No. 4461351022

  • 16 teeth for use with L149Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Ologymart 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear

  • Includes spindle gear,crown gear,sigle gear,double gear,worn gear,bevel gear,belt pulley,belt,connecting rack,axle sleeve,tee collar.
  • Pieces 75, ideal for DIY science and small production, product design and mechanical model.
  • 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one).
  • 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one).
  • 5X Belt(each one) 2X Connectiong Rack(each one) 1X Tee Collar.
Check Stock

GREEN FABWOOD 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear (Original Version)

  • 75 Type Plastic Crown Gear Single Double Reduction Gear Worm Gear Description: Material: plastic Type: spindle gear, crown gear, single gear, double gear, worn gear, bevel gear, belt pulley, belt, connecting rack, axle sleeve, tee collar Quantity: 75 Feature: 75 type ideal for DIY science and small production, product design and mechanical model Package included: 19X Double Reduction Gear(each one) 12X Single Reduction Gear(each on) 11X Crow Gear(each one) 2x Worm Gear(each one) 9X Spindle Gear(each one) 7X Belt Pulley(each one) 6X Axle Sleeve(each one) 5X Belt(each one) 2X Connection Rack(each one) 1X Tee Collar.
Check Stock

Boston Gear G485Y-G Bevel Gear, 2:1 Ratio, 0.250\ Bore, 24 Pitch, 36 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Brass

  • 36 teeth for use with G485Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

EXAUTOPONE Stainless Steel Bevel Gear Set AR44 Compatible with AR44 Heavy Duty RC Car Bevel Gear Set 30T/8T

  • 32 teeth for use with L149Y-P mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock