Top Straight Bevel Gear Suppliers Reviews

1PC 90-Degree reversing Angle Gear Right Angle Gear Steering Small Bevel Gear Box Bevel Gear Speed Ratio 1:1 (A)

  • 16 teeth for use with PA4416Y-G mating bevel gear in 4:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Boston Gear L153Y-G Bevel Gear, 1.5:1 Ratio, 0.750\ Bore, 10 Pitch, 30 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • 30 teeth for use with L153Y-P mating bevel gear in 1.5:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Boston Gear L147Y-P Bevel Pinion Gear, 2:1 Ratio, 0.188\ Bore, 20 Pitch, 10 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • 10 teeth for use with L147Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

Boston Gear G486Y-G Bevel Gear, 4:1 Ratio, 0.313\ Bore, 32 Pitch, 64 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Brass

  • ★[OPTIMAL PERFORMANCE]: EXAUTOPONE premium Stainless Steel Bevel Gear Set made of premium stainless steel material improves gear mesh, and with delicate workmanship, which is durable and hard, and long service life..
  • ★[GREAT APPLICATION]:EXAUTOPONE premium Stainless Steel Bevel Gear Set provides over drive for the front axle, helping to pull car climb easily. And it can guarantee to meet the original equipment..
  • ★[FITMENT]:Compatible with AR44 axles, including a 8T bevel gear and a 30T bevel gear..
  • ★[HIGH QUALITY]:EXAUTOPONE premium Stainless Steel Bevel Gear Set is 100% brand new aftermarket unit built to meet OEM specifications. easy to install and remove, ideal replacement for the old or broken one. Factory price with higher cost-effective..
  • ★[PACKAGE & WARRANTY]:Package Includes 1 Pcs X 30T/8T Stainless Steel Bevel Gear Set . Any question just contact us, we will reply you within 24H.And we offer a 12 month warranty..
Check Stock

PGFUN 2 Pcs 1M 20 Teeth 5/6/8mm Shaft Hole Tapered Bevel Gear 1:1# 45 Steel 1 Module 90 Degree Steering Gear with M5 Fixing Hole (5 mm)

  • 18 teeth for use with L152BY-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Unhardened teeth for applications where hardness and strength are not needed to transmit torque and motion.
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 14mm Hole 2 Module 20 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws and 1 spanner for simplicity and convenient use.Lower contact ratio between gears, higher load capacity..
  • ✅【20 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 2 module gear,20 teeth,90 degrees,14mm Hole Diameter..
  • ✅【Warm Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

2Pcs Tapered Bevel Pinion Gear Bevel Gears 12mm Hole 1.5 Module 16 Teeth for Hardware Mechanical Rotation

  • ✅【Widely Usage】Widely use in conveying, agricultural equipment, textile machinery, printing machinery, automotive applications, etc.Suitable for all kinds of mechanical transmission occasions..
  • ✅【16 Teeth Tapered Bevel Pinion Gear 】This mechanical bevel gears only can fits for 1.5 module gear,16 teeth,90 degrees,12mm Hole Diameter..
  • ✅【Easy to Use】The bevel gear set comes with two M5 screws for simplicity and convenience to use.Lower contact ratio between gears, higher load capacity..
  • ✅【Robust and Durable】The Bevel Gears Wheel are made of 45# steel with high wear-resistance,strong and durable..
  • ✅【Note】Please note that this 1:1 bevel gear wheel can only used with 1:1 gear wheel, and can not match the other modulus of teeth..
Check Stock

Boston Gear HL148Y-P Bevel Pinion Gear, 2:1 Ratio, 0.375\ Bore, 16 Pitch, 12 Teeth, 20 Degree Pressure Angle, Straight Bevel, Keyway, Steel with Case-Hardened Teeth

  • 12 teeth for use with HL148Y-G mating bevel gear in 2:1 gear ratio applications.
  • Straight bevel 90 degree mesh transmits mechanical power between perpendicular shafts.
  • Pressure angle of 20 degrees for a lower contact ratio between gears, resulting in higher load capacity than smaller pressure angles.
  • Low carbon steel (0.2 percent carbon) for applications where the hardness and strength of higher levels of carbon are not needed to transmit torque and motion.
  • Case-hardened teeth for applications where hardness and strength are needed to transmit torque and motion.
Check Stock

uxcell® 90 Degree Shaft Angle Replacement Part Spiral Bevel Helical Gear Set 3pcs

  • Ring Gear Size: 44 x 13mm/1.73'' x 0.51''(Max.D*T).
  • Pinion Gear Size: 19 x 12.5mm/0.75'' x 0.49''(Max.D*T).
Check Stock

Keylights Key Blank Specialty Bagged Sc1 Purple Plastic Head, Yellow Light

  • Ring Gear Size: 46 x 14mm/1.8'' x 0.55''(Max.D*T).
  • Pinion Gear Size: 17 x 12mm/0.67'' x 0.47''(Max.D*T).
Check Stock

Bevel Gear 1.5 Modulu 15/30 Teeth, Tapered Bevel Pinion Gear Hole Diameter 90 Degrees Tapered Bevel Motor Driving Metal Gear

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-18mm shaft hole, the key specs for this gear- 1:1 ratio, 2 Module, 20 teeth, 12mm shaft hole, M5 fixing hole with 4mm Keyway, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

Boston Gear L149Y-G Bevel Gear, 2:1 Ratio, 0.500\ Bore, 16 Pitch, 32 Teeth, 20 Degree Pressure Angle, Straight Bevel, Steel

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5mm, 6mm, 8mm shaft hole, the key specs for this gear- 1:1 ratio,1 module, 20 teeth, 5mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock

PGFUN 2 Pcs 1.5M 20 Teeth 8/10/12/14/15/16mm Shaft Hole Tapered Bevel Gear 1: 1# 45 Steel 1.5 Module 90 Degree Steering Gear with M5 Fixing Hole (10mm)

  • Multi Sizes Bevel Gears to Choose from: 1M, 1.5M, 2M/ 5-16mm shaft hole, the key specs for this gear- 1:1 ratio,1.5 Module, 20 teeth, 10mm shaft hole, M5 fixing hole, 90 degrees steering angle..
  • Widely applied in agricultural equipment, textile machinery, printing machinery, mechanical transmission, automotive and other industries that needs steering drive..
  • The bevel gear is made of 45# steel features high wear-resistance, strong and durable..
  • Note: 1 bevel gear only match 1 same scale gear, so 1 set （2 or more gears) should be replaced together for smoothly drive..
Check Stock