Top Metric Bearing Reviews

uxcell 4pcs SK20 Aluminum Linear Motion Rail Clamping Guide Support for 20mm Dia Shaft

Model: LM3UU, Bore Diamter (dr): 3mm, Outer Diameter (D): 7mm, Total Length (L): 10mm. Metric Double Seal Linear Bearing.
Made of high quality bearing steel for low noise and long service life.
Linear bearings are part of linear motion systems, used on 3D printers and CNC machines. These bearings have proven to be long lasting and provide precise low friction linear movement..
it can cooperate with linear bearing to ensure excellent sports performance under high load or long stroke occasions..
Smooth moving, low friction, high rigidity and long life. Bearing various parts of the size is standardized, interchangeable, no worry if replacement of worn..

Check Stock

Performance Tool W1157P SAE Clutch Alignment Tool

SAE shaft and bushings to fit 8 SAE pilot bearing sizes..
Plated aligning cone with graduated 1" and 1 1/8" diameters for "automatic" fit to most clutch plates..
W1158P shaft & bushings to fit 10 metric pilot bearing sizes. Tapered cone for all others..
Sizes SAE: .590, .612, .624, .668, .749, .786, .808 & .904".
Plated aligning cone with graduated diameters for "automatic" fit to most clutch plates..

Check Stock

NTN RA1562EBL - Cylindrical Roller Bearing - Straight Bore, 30 mm ID, 70 mm OD, 1.1875 in Width, C0 Internal Clearance

INA cylindrical roller bearing with a removable outer ring suitable for high radial loads.
CN (normal) radial clearance for applications where thermal expansion is not a factor.
Single row roller bearing for high radial loads with low friction.
Removable outer ring in open bearing allows for lubrication in place.
Metric unit measurements for industry consistency.

Check Stock

ABN Air Compressor Clutch Rebuild Removal Tool Kit AC Clutch Puller for Car Auto Air Conditioning on GM, Ford, Chrysler

...including GM, Ford, Chrysler, imports, and other makes and models.
Check vehicle owner’s manual for a list of compatible compressors.
EASY TO USE: Keep all threads clean and well-oiled.
Outer part of tool has smooth side and threaded side (threads used to attach to inner clutch shaft when removing).
Start with one bearing between tool and clutch, and thread down fully onto compressor's inner shaft threads (This is the fixed part - inner bolt does not move when threading down outer piece).
Remove tool and stack other bearing on to take up the distance the clutch pushed into pulley.
BUILT TO LAST: Constructed from stainless steel with a black coated finish for ultimate strength and longevity.
Resists rust and corrosion with proper care and lubrication.
2 and 3 hold puller plate allows mechanical force to do all of the pulling on most clutches.
EASY STORAGE: Heavy-duty 10.5” x 8.25” x 2.25” inch (26.7cm x 21cm x 5.7cm) plastic blow-molded carrying case with handle for easy transport, safe storage, and quick organization.
CONTENTS: Complete with puller body, jaw and sleeve assembly, jack-screw, thrust washer, button, bearing, and puller plates.
includes (1) 3-eye round clutch plate sander arbor, (3) 1/4-inch – 20 Hex screws, (2) 3/8-inch – 16 Hex....

Check Stock

Benliu M4 Ring Shape Lifting Eye Nut 304 Stainless Steel Threaded Nut Fastener-10 Pcs

Style: Ring shaped with precision threads.
Ideal lifting equipments with good bearing capacity. Widely used in lifting machinery, metallurgical and mining equipment, rail loading and uploading ports, forestry machinery and other electrical equipments..
Diameter of the flat bottom side (max): 15.12mm.
Made of stainless steel 304 (no coating outside) which is superior to regular steel and any zinc plated fasteners, provides good strength and corrosion resistance in bad environments..

Check Stock

PTSTEL 39 PCS Tap and Die Set Metric & SAE Essential Threading Tool Kit for Cutting External and Internal Threads with Adjustable Handles Accessories and Case

High-quality & Durability: PTSTEL metric & SAE tap and die set is made of industrial grade GCR15 bearing steel, which is non-corrosive and durable,....
Efficient Cutting: All cutting teeth of the tap and die set are precisely CNC machined and accurately heat treated to a rockwell hardness 60 HRC to....
Wide Range of Applications: The cutting thread tool set is processed with internal thread and external thread, and strong torsional force is ideal for....
Easy to Storage: Each taps and dies set is equipped with plastic tool box with corresponding scales engraved. You will never get the wrong size when....
Most Complete Size: 17pcs metric & SAE tap and die set: SAE: 5/16-18, 3/8-16, 7/16-14, 1/2-13, NPT tap (1/8-27), #4-40, #6-32, #8-32, 1/4-20 METRIC:....

Check Stock

Donepart 627ZZ Bearing 7mm x 22mmx 7mm Ball Bearings Double Shielded and Lubricated for Fidget Spinner, Skateboard, Mini Motor, 3D Printer, etc. (10 Pack)

627-ZZ Ball Bearing Size: 7mmx22mmx7mm ( ID:7 MM, OD: 22MM, Width: 7 MM) Metric Series.
Pre-Lubricated: 627-2zz roller bearings with double metal sealed ring, inside pre-Lubricated, provide stable performance..
Premium Material: Made of chorme steel, reduced friction, vibration, and noise. better than carbon steel, ensure a long usage life..
Deep groove ball bearing for high speeds and supporting both radial and axial loads..
Wide application: 608 bearing is a 7 mm ball bearing can be used in many rotary and factory automation applications. like skateboard, motors wheel, instruments, gearboxes, household appliances etc.

Check Stock

45 Pc Tap & Die Set Metric Mm Titanium Tungsten Steel Jumbo Thread Renew Tool

86 Piece Tap and Die Set Bearing Steel Sae and Metric Tools, Titanium Coated with Metal Carrying Case.
Size:14.8 x 10.7 x 2.2"inch / 37.6 x 27 x 5.6cm. Weight:12lb / 5.4kg. Material upgrading:Alloy Steel 55¡ã- 60¡ã, Sizes Stamped Engraved-etched On the Metal.
SAE TAP SIZES and SAE DIE SIZES: 1/8"-27NPT, 4-40, 6-32, 8-32, 10-32, 10-24, 12-24, 1/4"-20, 1/4"-28, 5/16"-18, 5/16-24, 3/8"-16,3/8"-24, 7/16"-14, 7/16"-20, 1/2"-13, 1/2"-20, 9/16"-12, 9/16"-18, 5/8"-11, 5/8"-18.
METRIC TAP SIZES and METRIC DIE SIZES: M3-0.5, M4-0.7, M5-0.8, M6-1.0, M7-1.0, M8-1.0, M8-1.25, M9-1.25, M10-1.5, M10-1.25, M11-1.5, M11-1.25, M12-1.75, M12-1.5, M14-2, M14-1.5, M16-2, M16-1.5.
Ideal for rethreading fasteners and fastener holes for auto and machinery repair. Perfect set for the professional craftsman Tap and die set is designed to thread cutting: tap is used to process internal thread, while the die is for external thread.
Easy Storage: Heavy-duty plastic blow-molded carrying case for easy transportation, safe storage, and quick organization.

Check Stock

uxcell 5202-2RS 3202-2RS Double Row Angular Contact Ball Bearing 15x35x15.9mm Sealed Chrome Steel Bearings 2-Pack

Type: Automotive Air Condition Angular Contact Bearing.

Check Stock

KER 27 in 1 Mini Ratchet Wrench set Ratchet Screwdriver bits & 1/4” Socket Wrench set 72 tooth Offset Ratchets Wrench Bit & Socket Set for Daily Maintenance Household Appliances Bicycles TVs

【Mini Ratchet Wrench by KER】The comfortable non-slip grip provides excellent handling.The mini screwdriver is small and light enough for operation....
【Magnetic Bit Adaptor】The secure grip magnet ensures your bit won’t drop.The magnetic adaptor ensures that any 1/4" hex bit can be firmly....
【Combined Metric Socket Set】1/4 inch Drive SAE &Metric Size. Metric - 4, 5, 6, 7, 8, 9, 10, 11, 12, 13mm. Bits - Torx T8, T15, T20, Slotted 4,6mm,....
【Magnetic Buckle Design Box】 The buckle design is more flexible by strong magnetic fixing, avoiding bearing breakage. ABS paint shell, comfortable....
【KER After-Sales Guarantee】 If you encounter any product quality or in use problems, please contact us in time, and we will give you a....

Check Stock

FAG N309E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Outer Ring, High Capacity, C3 Clearance, Metric, 45mm ID, 100mm OD, 25mm Width

FAG cylindrical roller bearing with a removable outer ring suitable for high radial loads.
C3 radial clearance is larger than normal allowing for thermal expansion.
Single row roller bearing for high radial loads with low friction.
Removable outer ring in open bearing allows for lubrication in place.
Metric unit measurements for industry consistency.

Check Stock

20 PCS Tap and Die Set - Metric Size M3 M4 M5 M6 M7 M8 M9 M10 M12 Tap Set and Die Set Threads Tapping Threading Tool Kit with Wrench Handle Storage Box

【Durability & Premium Material 】: This metric tap & die set made of industrial grade GCr15 bearing steel construction ensures durability and long....
【Easy to Be Used】: Tapered design coarse and fine taps and dies to make it more smoothly and easily create and rethread internal and external....
【Accuratly Cutting Performance】: Perfect threading manufacturing process,precisely CNC machined with qualified surface treatment, rockwell....
【Package Included】: Contain with 9 x metric taps and 9 x metric dies in muilti normal size, (M3 x 0.5mm), (M4 x 0.7mm), (M5 x 0.8mm), (M6 x 1mm),....
【Wide Application & Brand Guarantee】: It can create new threads and repair damaged threads on metals like stainless steel, copper, aluminum,....

Check Stock

FAG NUP2309E-TVP2-C3 Cylindrical Roller Bearing, Single Row, Straight Bore, Removable Inner Ring, Two Piece, High Capacity, C3 Clearance, Metric, 45mm ID, 100mm OD, 36mm Width

FAG cylindrical roller bearing with a removable inner ring suitable for high radial loads.
C3 radial clearance is larger than normal allowing for thermal expansion.
Single row roller bearing for high radial loads with low friction.
Removable inner ring in open bearing allows for lubrication in place.
Metric unit measurements for industry consistency.

Check Stock