Top Metric System Reviews

ChgImposs Screw Thread Pitch Cutting Gauge Tool Set, Stainless Steel Centre Gage with 55 Degree Inch System & 60 Degree Metric System

  • Used to measure the pitch of the thread and the tooth-shaped corner.
  • It sets 4pcs centre gage 55 Degree Inch System & 60 Degree Metric System, 52 pcs.
  • Center Gage use to grind and position thread cutting tool on a lathe. Typically used to check the thread size determination is correct.
  • All 52 pcs was made by stainless steel, not easy to rust. Ensure the accuracy of measurement..
  • Package Include: 1 x 52 Blade thread gauge.
  • 1 x ISO Metric 60°centering gauge thread gauge Tool.
  • 1 x English Wyeth 55°centering gauge thread gauge Tool.
  • 1 x American Standard 60°centering gauge thread gauge Tool.
Check Stock

JSM Bicycle Hub Flanged Axle Nut and Safety Washer Kit, 3 Size for Front and Back Bike Wheel

  • It is made of high strength steel with antirust treatment.
  • Includes 6 sets of 3-size flange nuts and safety washers(for both Metric and British System), suitable for most bicycle replacements.
  • Spec: NUT WM FRT 5/16x26 FLANGED(2 sets), NUT WM FRT 3/8x26FLANGED(2 sets), Metric NUT FLANGED M10*1(2 sets).Please refer to picture.
Check Stock

NOBUHIRO Metal Aluminum Alloy Offset Light Mount, M300 M600 Series Tactical Flashlight Scout Light Mount, Suitable for 20mm Picatinny Rail or Helmet Fixture, Black

  • Please Note: 1. The screws of the mount are M4 metric screws, please confirm whether the screw holes of your flashlight match before purchasing.
  • 2. When installing, be sure to make sure that the screw holes of the flashlight are aligned with the slots of the mount, otherwise it will cause the light loosening or fall off..
  • The unique mounting design places the bezel of the M300 or M600 tactical flashlights （M4 Metric Screws）above the barrel and in front of the front sight base, extends the weapon light beyond the end of the forend or rail system allowing the shooter to place the support hand farther forward on the weapon, improving the shooter's control..
  • It is at an offset angle allowing less ''snag points'' on the users' weapon system and allowing the user to maintain a limited profile of his/her weapon system..
  • The offset light mount is adapted to 20mm Picatinny rail. It can be installed on the left or right side of the mount according to your needs. The mount has a 3-hole design and there are three different installation methods for the flashlight, which can be selected according to personal needs..
  • Aluminum alloy material, Lightweight wear-resistant and durable. The slim profile of the mounting system itself, provides minimal weight reduction in ....
Check Stock

Muzerdo 115PCS Sae and Metric Bearing Steel Tap and Die Rethreading Kit with Metal Box

  • Construction Material – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more.
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
  • Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safely stored..
Check Stock

ARES 60141 – 8-Piece Metric & SAE Socket Keeper Socket Organizer Tray Set – Black & Red Socket Holders - Store 176 Standard & Deep Sockets - Socket Posts Feature High Visibility Markings

  • SPECIFICATIONS: This socket organizer set is a perfect organization system for your tool storage collection that makes it easy to store your most popular metric and SAE sockets, both standard and deep. Unlike other organizers, these trays feature vertical peg board designs that keep your sockets out of the tool box, immediately identifiable, and exactly where you need them. With this wide range of sizes, you can organize your tool chest with ease. *Sockets are not included with the holder.*.
  • SIZES: This set includes 176 posts with one standard and one deep post for each size. 1/4” drive sizes include a metric range of 4mm to 15mm and an SAE range of 1/8” to 5/8”. 3/8” drive sizes include a metric range of 6mm to 20mm and an SAE range of 1/4" to 1". 1/2” drive sizes include a metric range of 10mm to 27mm and an SAE range of 3/8” to 1-1/4”. For a complete list of included posts, please reference this item’s images for a comprehensive table of sizes..
  • DESIGN: These socket organizers make managing sockets simple.
  • each tray’s vertical posts secure sockets and feature size markings for easy identification. With their unique 2-tray designs for superior organization and mobility, the ½” organizers offer more extensive 1/2” socket st....
Check Stock

M12-1.75 x 30mm Hex Head Bolts Hexagon Screws, Class 12.9 Alloy Steel Black Oxide Finish, Full Thread, 10 PCS

  • WIDE APPLICATION : The hex bolts can be used for different kinds of furniture such as cribs, cupboards, wardrobes, bunk beds, etc. It also good for office appliance, communication equipment, ship assembly and other machinery industry..
Check Stock

ATOPLEE Spiral Point Plug Threading Tap ,5pcs HSS 6542 Titanium Coated Metric Right Hand Thread Taps,M3-M8

  • ...ial – Steel is the base metal used in the construction of these sets – but not all steel is created equally! Look for steel alloy or, even better, Titanium tipped cutting surfaces. The better the metal the tougher the tap and die so they so they can cut into more materials and they will stay sharper for longer..
  • Metric/SAE – The size of the tap and die is also important. Metric is of course the European measurement system, SAE are based on US sizes (so use inches instead of millimeters). This is important as you may struggle to use a SAE tap and die set on a vehicle with metric measurements. If the car is made in the US, it probably uses SAE measurements. If it is a European carmaker, it’s probably the opposite. If can look for a set with dual Metric and SAE compatibility of course then you don’t have t.
  • Metal Storage Case – More than with many other types of tools, the storage case is an important part of the tap and die set. Frankly, because these sets can come with multiple parts, you do want a case that is well designed to keep all the little pieces well organized and safely stored..
Check Stock

ARES 60178 – 8-Piece Metric & SAE Socket Keeper Socket Organizer Tray Set – Black & Green Socket Holders - Store 176 Standard & Deep Sockets - Socket Posts Feature High Visibility Markings

  • SPECIFICATIONS: This socket organizer set is a perfect organization system for your tool storage collection that makes it easy to store your most popular metric and SAE sockets, both standard and deep. Unlike other organizers, these trays feature vertical peg board designs that keep your sockets out of the tool box, immediately identifiable, and exactly where you need them. With this wide range of sizes, you can organize your tool chest with ease. *Sockets are not included with the holder.*.
  • SIZES: This set includes 176 posts with one standard and one deep post for each size. 1/4” drive sizes include a metric range of 4mm to 15mm and an SAE range of 1/8” to 5/8”. 3/8” drive sizes include a metric range of 6mm to 20mm and an SAE range of 1/4" to 1". 1/2” drive sizes include a metric range of 10mm to 27mm and an SAE range of 3/8” to 1-1/4”. For a complete list of included posts, please reference this item’s images for a comprehensive table of sizes..
  • DESIGN: These socket organizers make managing sockets simple.
  • each tray’s vertical posts secure sockets and feature size markings for easy identification. With their unique 2-tray designs ....
Check Stock

4 Sets Furniture Legs Mounting Plates with Hanger Bolts Screws Great for Furniture Leg,Chair, Sofa,Cabinet,Couche, Set of 4

  • Pack list: 4 Pcs M8 hanger bolts, 12 Pcs screw. Note: Our products belong to the metric M8 hanger bolts. If you find that you can’t screw the hanger bolts, the accessories may not match (the imperial system does not match the metric system). You can check it carefully before purchasing. If there is a purchase error, please contact us in time. You can get a refund for free..
  • Widdly use:The furniture leg attachment plates are designed for attaching legs to new or damaged sofas, couches, seats, ottomans and more..
  • Easy to Install: Sofa leg mounting plate sets protect the furniture legs effectively, make your furniture more durable..
  • Furniture Leg Mounting Plates can be applied to repair the furniture when the sofa are damaged and missed the threaded nut, or the T-nuts have wiggled loose and won't stay in place..
  • Complete accessories: No need to purchase hanger bolts separately. You can follow the plan to install immediately,When you install product and found any questions,please contact us in time,Our after-saler team will support you immediately..
Check Stock

SATA 212-Piece Ultimate Socket Set 1/4-Inch, 3/8-Inch, 1/2-Inch Drive - ST09511U

  • [VERSATILE SET] 6 Spark Plug Sockets, 23-1/4" Dr. 6PT SAE and Metric Sockets, 19- 1/4" Dr. 6PT SAE and Metric Deep Sockets, 29-3/8" 6PT SAE and Metric Sockets, 24-3/8" Dr. 6PT SAE and Metric Deep Sockets, 39-1/2" Dr. 6PT SAE and Metric Sockets, 29-1/2" 6PT SAE and Metric Deep Sockets, 35-1/2" Dr. 12PT SAE and Metric Sockets, 8-1/2" Dr. 12PT Deep Metric Sockets.
  • [ACCESS] Sockets Feature Off-Corner Loading to Reduce Fastener Rounding.
  • [LONG-LASTING] Full Polish Chrome Finish.
  • Chamfered Opening to Guide Fastener Into Socket.
  • [READABILITY] Large Hard-Stamped Size Identification.
Check Stock

Puerta Corrediza (Sliding Door)

  • Our barn door style sliding system is the perfect way to add a contemporary look and feel into your home. Once installed your doors will glide seamlessly on our premium metal track system..
  • Magic 2 has heavy duty suspensions sliding track system has been reinforced with larger bearings, hinges, pivots and more! The two fixed spring system can withstand up to 176 pounds of door weight..
  • Our concealed sliding track system increases smoothness of motion and quietness when in it slides against the floor. So no need to worry about noisy doors or being disruptive. Great for closets, bedrooms & bathrooms.
  • Our patented slider system incorporates micro metric adjustment technology which allows any type of vertical and horizontal adjustments to be made to compensate for possible wall irregularities. All possible without having to remove the door & track hardware..
  • Upgrade your home today by trying our heavy duty sliding door hardware kits and see for yourself how adding sliding functionality in your home will having you asking why you didn't do this sooner..
Check Stock

AdirPro 715-06 16' Retractable Digital Measuring Tape with LCD Display

  • ... feet/inches with 16ths, inches with 16ths, inches with 10ths (one decimal place), and centimeters with tenths (one decimal place). You can set it to use at a zero start to measure from where the tape exits the housing or with a 3″ offset to measure from the back of the housing..
  • UNIT CONVERTER (IMPERIAL/METRIC). Depending on your preference or the type of job you’re doing, you can easily switch between imperial and metric systems with a simple touch of a button..
  • ADDITIONAL FUNCTIONS. The hold function is used to keep the measurement taken on the display when retracting the blade, while the memory function serves to retain this measurement even when the unit is powered off. This tool will conveniently hold up to 8 measurements in its memory storage that can be used for either long- or short-term use..
  • COMPLETE PACKAGE. The measuring tape comes complete with a heavy-duty belt clip and wrist strap for easy storage and handling. In addition, a standard CR2032 3V lithium battery is included, boasting an approximate lifetime of one year. An automatic shutoff feature after 6 minutes of inactivity will preserve the life of the battery..
Check Stock

B&C Home Goods Socket Organizers - 6 Piece SAE & Metric Tray Socket Holder - Toolbox Organizers and Storage for ¼, ⅜ and ½ inch Drive Holder for Mechanics

  • Clutter Cleansing: This socket organizer will revolutionize your toolbox. With its heavy duty, 6 set socket trays (in both SAE & metric measurements) it's the perfect aid to keep your workbench & garage in order. No more rummaging for rogue sockets!.
  • Organize By Size: We want to make your life as easy as possible - particularly when you’re mid-repair & don't want to be searching through a messy tool chest! This socket organizer tray has clearly labeled measurements for convenient size classification..
  • SAE & Metric Trays: Our socket organizers for toolboxes feature a color coordinated system to help you identify which measurement tray you need - 3 red SAE trays & 3 black metric trays - so you can quickly & easily recognize the correct socket holders..
  • Stability: We pride ourselves on creating practical & effective products. Which is why our socket tray have been developed w/ an extra-large base, offering increased stability to avoid unnecessary tipping. Reliable products you can trust..
  • Size: Does your disorderly toolbox affect your work? If so, our socket storage organizer can save the day! The 1/4" drive trays fit sizes 1/8"-5/8” & 4-15mm, the 3/8" trays 1/4"-1” & 6-20mm & the 1/2" trays 3/8""-1 1/4" & 10-27mm. Get your sockets sorted!.
Check Stock