Top Metal Clamps Reviews

Toolly 16 Pack Butt Welding Clamps - Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • Butt Welding Clamps includes 16 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
  • Use the Toolly Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 16 clamps for larger projects, then joint weld between them.
Check Stock

Non-Stripping 1 inch Hose Clamp Size#10 Wide Higher Torque Heavy Duty 5/8 to 1-1/16 Adjustable Worm Gear Hose Clamps Stainless Steel 304 Pipe Tubing Clamps Heater Hose Clamps 3/4 and 5/8 20Pack

  • Why Non-Stripping: Our hose clamp band material is thick and non-perforated. The other typical 1" hose clamps are thin and perforated which's easy to deform and strip the perforations if the screw clamp is over-torqued. Our screws are much bigger and with deeper threads that grip the embossed band tightly. The buckle bottom is welded into one-piece housing for higher tensile strength. These heavy duty hose clamps can provide superior clamping force for solid & safe seal!.
  • Rolled Band Edge Protection: As our 3rd picture, the rolled-up band is effective to prevent the metal edge cutting into the soft hoses, no matter for silicone, pvc or rubber hose. This is an important and safe design for worm drive hose clamps to eliminate the damage to hoses during installation and final torquing, especially for heater silicone hose and automotive applications..
  • Non-Perforated Band Stronger: Compared with perforated band, our non-perforated solid band is virtually impervious to over-tightening, deformed and stripping. The thicker metal is less vulnerable to stress cracking, so the life of screw clamps can last longer. The embossed band also protects the soft hoses from shearing or extruding (like "cheese-grater" making you hard to remove the tubing clamps out of ....
Check Stock

Gorilla Gripper 'GP' 0 to 3/4\ (0 to 22mm)

  • 【High Quality】Stone carrying clamps is designed with heavy-duty solid metal construction and made of high quality aluminum, A3 steel and rubber. These high-quality materials make the carrying clamps more durable and not easily deformed..
  • 【Powerful Carrying Capacity】Granite carrying clamps load up to 660lb/300kg. Opening: 0-2.36in/60mm. The carrying clamps help you to work more efficiently on jobs. These may be used alone or in conjuction with other pairs to move small or large pieces with ease..
  • 【Non-slip Handle & Rubber Pads】The stone lifting tools have fully vulcanized rubber pads which provide added grip and prevent damage to your materials.The non-slip handle make transporting more safer, ergonomically design make it more comfortable to hold..
  • 【Widely Application】The double handed carrying clamps is used for lifting and transporting stone slabs,sheets of glass,granite island marble soapstone,metal sheet,plywood etc.Can be used for rough and smooth surfaces..
  • 【100% Guarantee】Our granite lifting tools come with one year warranty and 24 hours online service. For any reason if you don't like. You will receive a full refund..
Check Stock

ABN Butt Welding Clamps - 8 Piece Small Welding Clamps Auto Body Panel Clamps for Edge to Edge Welding

  • [Perfectly Align Panels] Use the ABN Welding Square Clamp Set to pinch sheet metal panels level to each other.
  • While these metal clamps hold panels edge to edge with a 1mm gap, you can quickly weld the sheets together.
  • [Fits your Project] Each welding square tool pipe clamp can extend the clamp block to provide a .4-inch (1cm) tall gap.
  • Fits 3/16-inch to 26 gauge sheet metal materials.
  • [Easy to Use] Loosen the winged nut from the alignment screw then wedge two panels across from each other between the square body and the clamp block.
  • Tighten the winged nut to ensure a secure hold.
  • Use all 8 clamps for larger projects, then joint weld between them.
  • [Built to Last] Panel welding clamps are constructed of zinc-plated steel to ensure maximum durability and strength while resisting rust.
  • [Contents] Welding accessories set includes 8 welding corner square welder clamps.
  • Used to make precision butt welds and edge-to-edge welds for patch repairs in floors, wings, door skins, fabricating, and re-skinning projects.
Check Stock

Rhino Rack 2500 Roof Rack Pad & Clamp Kit, DK438, Set of 4, Small

  • Rhino-Rack's DK kits are used in all the 2500 roof rack systems. The kit consists of the pads and clamps which attach to your vehicle's roof. The kit includes 4 pads and 4 clamps..
  • Used to replace the pad and clamps on Rhino-Rack's 2500 two bar roof rack systems.
  • Strong anti-corrosive black metal clamps.
Check Stock

Corner Clamps 4Pcs Woodworking 90 Degree Clamps of Cast Metal, Durable Go-tool Right Angle Clamp with Adjustable Jaws Good for DIY Framing, Shelving, Welding, Fish-tanks, Cabinets

  • §【Free Your Hand】: The problematic miter joint projects still annoy you? Innovative 90 degree corner clamps make setup more manageable with L-shaped jaw that can clamp different pieces simultaneously, saving your time and freeing your busy hands without requiring more aligning and turning..
  • §【Versatility】: The woodworking corner clamps align two pieces of wood, planks, metal, or glass into the clamp at a 90-degree angle. Moreover, the right angle clamps set is suitable for fixing fish-tanks, joining photo frames, installing furniture, welding, and molding, featuring holes in the base that allow them to be mounted to a workbench to add more stability for setup..
  • §【Premium Quality】: The rustproof aluminum-alloy parts of the unit make the angle clamps exceptionally long-lasting and coating on the surface prevents corrosion without worrying subpar paints would rub off on your workpieces. The vise-like design can hold firmly up to 200  pounds of pressure and nylon rounds that keep you from damaging the pieces being joined..
  • §【Accuracy】: The accuracy of the corner clamps allows you to make and reinforce frames with precision featuring maximum clamping range of 3-inch. The swivel jaw can rotate the clamp to adjust work-pieces to different ....
Check Stock

Metal Clips for Rope, Cord, String - Heavy Duty Zinc Plated Double Rope Clamps (1 Inch, 10 Pack)

  • ZINC CLIPS WITH LUXURY FLAIR: The attractive zinc plated color of Paracord Planet’s rope clamps give them an ultra-stylish finish and chic appearance. Easy to use, and efficient, our rope clamps can effectively clamp all rope, and other cordage, within a wide range of sizes. The 1-Inch size fits two 1/2-Inch ropes, the 1/2-Inch size fits two 1/4-Inch ropes, the 3/4-Inch size fits two 3/8-Inch ropes and the 5/8-Inch size fits two 5/16-Inch ropes..
  • MULTIPURPOSE ROPE CLAMP: Our rope clamps work great both indoors and outdoors. Use them to create animal and pet leashes, leads for horses, fender lines, keychains, or use on your boat, dock, and other marine environments. Our clamps will hold up extreme weather conditions, meaning they work great for sprinklers and flagpoles as well. The possibilities are endless with Paracord Planet Metal Rope Clamps..
  • MULTIPLE PACK OPTIONS: Available in 2-Pack, 3-Pack, 5-Pack, and 10-Pack options. Our rope clamps come in an attractive zinc platted color and are available in multiple size options including: 1-Inch (fitting two 1/2-Inch ropes), 1/2-Inch (fitting two 1/4-Inch ropes), 3/4-Inch (fitting two 3/8-Inch ropes), and 5/8-Inch (fi....
Check Stock

25 Pack Stainless Steel Hose Clamps, 1/4 inch to 1/2 inch Worm Gear Metal Hose Clamps for Pipe, Dryer Repair, Tubing and Fuel Line

  • Adjustable hose clamps are high torque, adjustable from 1/4 - 1/2 inch (6-12mm), ideal as 1/4 inch pipe clamps, 3/8 inch tube clamps, 1/2 inch screw clamps, etc..
  • Metal clamps are all premium 304 stainless steel to provide maximum corrosion resistance to salt and most chemicals, the worm drive hose clamps comply with SAE standards, when installing on the pipe, you will no longer worry about them rusting and breaking..
  • Pipe clamp for a variety of applications for marine, auto, water pipes, fuel lines, dryer, vent, radiator, etc. to meet your needs in different applications..
  • Easy to install, use a screwdriver to tighten or loosen the screw of hose clips then adjust the size, Secures pipe clamp tightly in place..
  • You will receive 25 pieces of 1/2 to 1/4 inch hose clamps and if for any reason you are not satisfied with your purchase, please contact us for a lifetime refund or exchange!.
Check Stock

CV Joint Boot Clamp Pliers - 22Pcs CV Boot Clamps Kit Auto Repair Tool Automotive Hose Axle Plier CV Clamp Tool for Most Cars

  • CV BOOT CLAMP PLIERS – With 2pcs CV joint boot clamps pliers car banding tools kit set for fast and simple tensioning and securing of CV boot banding strap. Heavy-duty pliers with steel jaws and formed handles for ultimate comfort, less user fatigue, and more productivity..
  • 20PCS CV BOOT CLAMPS – 10X small clamps and 10X big clamps is included.Made of stainless steel, with high toughness and adjustable length.It’s perfect for you to replace the car broken drive shaft CV boot clamp..
  • CV BOOT CLAMP TOOL KIT – We prepared 10Pcs small stainless steel cv boot clamps and 10Pcs large clamps for fixing cv boots. and 2pcs Auto Cv Joint Boot Clamps Pliers in this car banding tools kit, which is a perfect set for fast and simple tensioning and securing of CV boot banding strap..
  • EAR CLAMP PLIERS – Ideal for installing clamps on fuel filters, water pumps, CV joint boots,ATV axle boot and other cooling system hoses.This CV joint axle boot clamp pliers fits most of cars..
  • CV JOINT BOOT – The cv boot clamps are made of non-magnetic stainless steel material, which is an ideal choice for areas that get a lot of rainfall or snow because the metal is resistant to rusting and very durable..
Check Stock

SDRTOP 2 PACK Double Handed Stone Carrying Clamps Granite Panel Carriers Lifting Tools 660lbs Transporting Heavy Duty Carry Clamp for Glass Quartz Slabs Marble with Rubber-lined （0-2.36in)

  • ★【Product Features】Granite carrying clamps includes two high-quality anti-slip handle, and the vulcanized rubber padded jaws, prevent damage to material surface better, allow you to safely lift and carry panels with a comfortable posture..
  • ★【Wide Range of Applications】SDRTOP Stone carrying clamps can be used for smooth and rough surfaces, excellent for lifting and moving glass, granite, countertop, metal sheet, plywood and ceramic slabs..
  • ★【Strong Lifting Capacity】Granite lifting tools has an excellent jaw, Capacity up to 660lb/300kg. Jaw Opening: 0-2.3''(60mm). Compare with suction cup, our clamps for granite is more easily to operation..
  • ★【Solid Metal Construction】: This Double handed carrying clamps with a heavy-duty solid metal construction. Material is aluminum, A3 steel and rubber, The handle itself is made of durable, impact-resistant ABS polymer, is built to last..
  • ★【Reasons to Choose Us】You will get A pair of panel carrier tool, and we promise that you can buy the best quality products at the lowest price, you can enjoy friendly 24 hours online service and 100% payment refund if not satisfied..
Check Stock

VEVOR Sheet Metal Brake 36 In. Metal Bender Brake 910 mm Length Portable Metal Bender 0-90 Degrees & WEN 3650 4.0-Amp Corded Variable Speed Swivel Head Electric Metal Cutter Shear

  • Product 1: 0-90° Flexible Bending: You can adjust to a specific angle between 0° and 90° according to your work needs. The metal bender brake is ideal for bending heavy foils and light gauge metals. Bending material gauge up to 20 gauge mild steel & 14 gauge aluminum..
  • Product 1: Two C-Shaped Clamps & Knobs: Effortless bending can be achieved through adjusting two lengthen handles. Pre-drilled touting holes allow mounting on the bench. And two C-shaped clamps are provided.
  • you can fix the brake with clamps conveniently..
  • Product 1: Heavy Steel Construction: The sheet metal bending brake is well-built with premium steel. Solid construction will stand for many years of heavy use. And it's compact and portable.
  • you can easily bring it from home to your job site..
  • Product 2: Pressure sensitive trigger cuts anywhere from 0 to 2500 strokes per minute.
  • Product 2: Attack up to 20 gauge stainless steel and 18 gauge sheet metal.
  • Product 2: Lightweight design limits fatigue during operation.
  • Product 2: Utilizes a powerful 4-amp motor, curling the metal as it cuts.
Check Stock

Jiayouy Stainless Steel Violin Repair Joining Clamp Luthier Tool for Violin Repair Maintenance 5PCS

  • Violin/Viola Joining Clamps, Seam Crack clamps..
  • Metal wheel clamps are strong and stable..
  • Fixing the top and back of the violin in making and repairing..
Check Stock

52pcs Cable Clamps Assortment Kit 6 Sizes 1/4\ 3/8\ 1/2\ 5/8\ 3/4\ 1\ Cable Clamps Rubber Cushioned With Screws 304 Stainless Steel R Style Pipe Clamps Assorted Cable Wire

  • MATERIAL: Clamps are made of 304 Stainless steel material and high quality rubber cushioned. Salt resistant, anti rust, anti-corrosion, waterproof, oil-proof. Clamps are sturdy, strong and reliable..
  • QUANTITY: 12pcs 1/4" (6mm), 10pcs 3/8" (8mm), 8pcs 1/2"(13mm), 8pcs 5/8"(16mm), 8pcs 3/4"(19mm), 6pcs 1" (25mm) and 25pcs Screws M6x20mm. Cable clamp screw hold diameter: 6.5mm, suitable for 6M( 1/4'') screw bolts and nuts to thread.
  • STYLISH DESIGN- The R-Style design makes the clamps stylish, flexible and innovative. Strong and reliable. Easy to twist, bend, manipulate when install..
  • APPLICATION：Cable clamps assortment kit are perfect to apply in automotive, industrial, boat/marine, windshield, household etc. for wiring, cables, pipe, rack, line management and restoration..
  • ENVIRONMENTAL FRIENDLY- It can be reused and recycle if you do not want them to stay on the original place..
  • 3/4 pipe repair clamp pipe clamp tools pipe clamp tools pipe clamp pipe clamp 1/2 steel cable clamp 1/4 cable clamps 16mm cable clamp 3/4 cable clamp 3/8 cable clamp 3/8 insulated cable clamp cable clamp 1 cable clamp assortment cable clamps 1 inch cable clamps 1/2 cable clamps 3/4 inch cable clamps assortment kit insulated cable clamp lokman cable clamp 3/8 metal cable clamp 3/8.
Check Stock