Top Mbot Wifi Module Reviews

DollaTek 5V ESP8266 Four Channel WiFi Relay IOT Smart Home Cellphone APP Remote Control

  • On board high quality MCU and ESP-01WIFI module Two working mode : Mode 1:cellphone carry on wifi module directly Mode 2:cellphone and wifi module carry on router together Additional function :work as USB module when disconnect ESP-01 module.
  • Transmission distance: (1) the open environment, the mobile phone when carrying on the WIFI module maximum transmission distance of 100 m.
  • (2), when the WiFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal.
  • Use the Smartconfig technology to complete the configuration of the account and password of the esp-01 WIFI module on the mobile APP. The configured account and password will be memorized after power off.
  • The board contains 5V,10A/250V AC 10A/30V DC relay, which can continuously absorb 100,000 times, with the protection of diode current and short response time..
  • With mode option and working statue LED indicator.With 4 isolator and strong anti interference ability.Reserved UART debug interface and MCU download port for program.
Check Stock

Wifi Relay Module, 5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch

  • 2 WORKING MODES---Mode 1: The phone is directly installed on the WiFi module.
  • Mode 2: Equipped with a mobile phone and WiFi module on the router.
  • Additional features: It can also be used as a USB relay when the ESP-01 is pulled out.
  • TRANSMISSION DISTANCE---In an open environment, when the mobile phone is installed on the WiFi module, the maximum stable transmission distance is 100M. When the WiFi module and the mobile phone are simultaneously carried on the router, the transmission distance depends on the signal strength of the router.
  • SMARTCONGIG TECHNOLOGY---Use smartcongig technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions.
  • SHORT RESPONSE TIME---On-board 5V,10A250V AC 10AV30V DC relay, which can continuously pull 100,000 times, with diode discharge protection and short response time. Onboard ESP-01 WiFi module and high performance microprocessor STM8S103.
  • OTHER EQUIPMENT---Board mode selection and real-time working status indicator. Reserved UART debug interface and STM8 SWIM program download interface.
Check Stock

Bluetooth WiFi Board Wireless WiFi Card Module Replacement Part for Microsoft Xbox One S (Slim)

  • Bluetooth Wifi Board Replacement Wireless WiFi Card Module Replacement Part for Microsoft Xbox One Slim.
  • Tips: This is replacement to replace your old damage WiFi Card Module, don’t include instructions, please install it by a professional technician..
  • Broken your WiFi Card Module? don’t need to change new device, just buy this item and replace your damage WiFi Card Module, let your machine work again..
  • Compatible with: Microsoft Xbox One Slim Console (Please check your model before your purchase).
  • Shipped by Amazon. Any questions, please contact us first, we will try our best to help you..
Check Stock

TECHTOO WiFi Antenna 2.4GHz 10 dBi for Wireless Router - Security IP Camera - USB Card Adapter - PCI PCIe Cards - Range Extender - PC Desktop - Drone - Signal Booster (RP-SMA 1-Pack)

  • ...t Applicable cable: 0.81mm RF coaxial cable Application Technology: IEEE802.11 ax/ac/a/b/g/n, WiMax, Zigbee, Bluetooth Wireless Length: one：42cm（16.53inches） another：47cm（18.50inches）.ngff cable ipex mhf antenna wire wifi internal pigtail antenna.
  • Ultra small size connector for Note Book PC, computer GPS module cable, GSM module cablem WLAN 2.4GHz module cable, WLAN 5.8Ghz module cable, Digital apploance, Dual band ghz mini antennas for long wwan wifi booster gaming omnidirectional wifi antenna.
  • NOTE: Only Use for M.2 (NGFF) Interface, Do Not Use for MINI pcie Interface (please look the Picture), 2.4/5G Dual Frequency Internal High Gain WiFi Antenna mhf4 Jack pigtail cable extension directional extender cable antenna replacement kit for wireless module & bluetooth wifi cards.
  • Frequency Range: DC up to 6GHz (VSWR: 1.3 max. at 0.1~3GHz.
  • VSWR: 1.4 max. at 3~6GHz) ( option: 1.2Ghz 2.4Ghz 3Ghz 6Ghz 8Ghz 12Ghz 18G... ) Rated Voltage: AC 60v Contact Resistance: 20m ohm max.(Signal) and 10m ohm max.(Ground) Withstand Voltage: AC 200V Insulation Resistance: 500M ohm Min./DC 100V density.
  • Also work for intel 9260ngw ax200ngw 7260hmw and the Jetson Nano Module M.2 wifi card with MHF4 connector.killer ax1650 broadcom asus wifi modem internal cards alfa e....
Check Stock

Makeblock mBot Starter Kit with Bluetooth Dongle Learning & Education Toys with Arduino/Scratch Coding Electronic Sensors Building Robots for Kids Ages 8+ Computer Science Robot kit for Classroom

  • 【Learning & Education Robots For Kids】The Makeblock mBot robot kit was designed for beginners to learn coding in a simple and fun way. Bluetooth....
  • 【Multi-modules Car Kit with Remote Control】The mbot robotics kit contains various electronic modules including Bluetooth modules, ultrasonic....
  • 【Coding Software Platform for Beginners 】The drag-and-drop software provides an intuitive way for kids to learn coding. With the mBlock Blockly....
  • 【Infinite Creative Robot with Add-on Packs】The mBot STEM robot kit has an open-source system that ensures rich and engaging add-on pack play and....
  • 【A Perfect Gift of Wireless Programming Robot for Kids at Home and School】Being well packaged, mBot is made of high-strength 6061 Aluminum alloy....
Check Stock

Makeblock mBot STEM Projects for Kids Ages 8-12, Learning & Education Toys Gift for Boys and Girls to Learn Robotics, Electronics and Programming While Playing, Coding Robot Kit

  • 【Entry-level Coding Robot Toy】 Designed for learning electronics, robotics and programming in a simple and fun way, mBot is an excellent educational robot toy. From scratch to Arduino, it helps kids to learn programming step by step via interactive software and learning resources..
  • 【Easy to Build】 mBot STEM building kit can be easily built within 15 minutes with just a screw. Kids will learn more about electronics, machinery, and robotics components through building. You can also play it as a remote control car with its multi-functions: line-follow, obstacle-avoidance and so on..
  • 【Rich Tutorials for Programming】 Makeblock offers rich tutorials, available both on online community and coding cards (included). Matched with 3 free Makeblock apps, and mBlock software, kids can enjoy remote control, play programming games, and program with mBot. It's easy for your kids to start coding with mbot. Note that the remote control needs a CR2025 battery(NOT INCLUDED), and the robot needs 4 AA batteries (NOT INCLUDED).
  • 【Awesome Gift for Kids】 Surprise your little Kids with super cool robotics kits and let them discover the secrets of programming & electronics. Being well packaged, it is a perfect learning & educational toy gift for boys and girls on B....
Check Stock

Bluetooth MHF4 IPEX 2.4Ghz 5Ghz 5.8G WLAN Network Adapter PC WiFi Antenna for Intel 7260 8260 8265 9265 9260 9560 AX200 AX Killer M.2 IPEX4 Wi-Fi Wireless WLAN Card Banana Pi 4 M2 Zero Hachintosh

  • ...t Applicable cable: 0.81mm RF coaxial cable Application Technology: IEEE802.11 ax/ac/a/b/g/n, WiMax, Zigbee, Bluetooth Wireless Length: one：42cm（16.53inches） another：47cm（18.50inches）.ngff cable ipex mhf antenna wire wifi internal pigtail antenna.
  • Ultra small size connector for Note Book PC, computer GPS module cable, GSM module cablem WLAN 2.4GHz module cable, WLAN 5.8Ghz module cable, Digital apploance, Dual band ghz mini antennas for long wwan wifi booster gaming omnidirectional wifi antenna.
  • NOTE: Only Use for M.2 (NGFF) Interface, Do Not Use for MINI pcie Interface (please look the Picture), 2.4/5G Dual Frequency Internal High Gain WiFi Antenna mhf4 Jack pigtail cable extension directional extender cable antenna replacement kit for wireless module & bluetooth wifi cards.
  • Frequency Range: DC up to 6GHz (VSWR: 1.3 max. at 0.1~3GHz.
  • VSWR: 1.4 max. at 3~6GHz) ( option: 1.2Ghz 2.4Ghz 3Ghz 6Ghz 8Ghz 12Ghz 18G... ) Rated Voltage: AC 60v Contact Resistance: 20m ohm max.(Signal) and 10m ohm max.(Ground) Withstand Voltage: AC 200V Insulation Resistance: 500M ohm Min./DC 100V density.
  • Also work for intel 9260ngw ax200ngw 7260hmw and the Jetson Nano Module M.2 wifi card with MHF4 connector.killer ax1650 broadcom asus wifi modem internal cards alfa e....
Check Stock

5V ESP8266 Dual Channel WiFi Relay Module IOT Smart Home Phone APP Remote Switch with 100M Transmission Distance

  • ON-BOARD ESP-01 WIFI MODULE: The relay board is equipped with on-board ESP-01 WiFi module and high performance microprocessor STM8S103..
  • UART DEBUG INTERFACE: The relay has reserved UART debug interface and STM8 SWIM program download interface..
  • SMART CONFIG TECHNOLOGY: The module uses smart config technology to complete the account and password configuration on the APP ESP-01 WiFi module on the mobile phone, and configure the username and password memory functions..
  • ON-BOARD 5V RELAY: This relay module adopts On-board 5V,10A250V AC 10A30V DC relay, which can continuously pull 100,000 times with diode discharge protection and short response time..
  • WORKING STATUS INDICATOR: The module has board mode selection and real-time working status indicator..
Check Stock

ACEIRMC 2pcs ESP32-CAM WiFi Bluetooth Camera Module Development Board ESP32 with Camera Module OV2640 2MP for Arduino (4pcs)

  • The ESP32CAM is a tiny module based on ESP32 chip and OV2640. You can even program the ESP32CAM through the ESP-IDF by installing the ESP32 Core.
  • ESP32-CAM WiFi Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP for Arduino, Support Image WiFi Upload and TF Card.
  • Supports interfaces such as UART/SPI/I2C/PWM/ADC/DAC.
  • Support OV2640 and OV7670 cameras, built-in flash.
  • Support image WiFi upload and Support TF card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Ultra-small 802.11b/g/n Wi-Fi + BT/BLE SoC module.
Check Stock

ESP8266 Wire~Less Wi~Fi Transceiver Relay Module, 4 Channel DC 5V Smart Switch Relay Module for Smart Home Automation System IOT A~PP Con~Troller

  • SUPPORT TWO WORK MODE: Mode 1: cellphone carry on WIFI module directly. Mode 2: cellphone and WIFI module carry on router together..
  • TRANSMISSION DISTANCE: In the open environment,when mobile phone is carrying on the WIFI module ,maximum transmission distance is 100 meter. When the WIFI module and cell phone carrying on the router at the same time the signal transmission distance depends on router signal..
  • SAFE: Optocoupler isolated output, safe and reliable..
  • LED INDICATOR: On board relay LED indicator , mode option and working statue LED indicator..
  • SHOP WITH CONFIDENCE: To Provide You With the Highest Quality Service, If You Have Any Question, Please Feel Free to Contact Us.We Will Provide After-sales Service Until You Are Satisfied..
Check Stock

ACEIRMC ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MP + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire

  • ESP32-CAM WiFi + Bluetooth Module WiFi ESP32 CAM Development Board with Camera Module OV2640 2MPcompatible for Arduino, Support Image WiFi Upload and TF Card.
  • Bluetooth: Bluetooth 4.2 BR/EDR and BLE standard.
  • Camera WiFi + Bluetooth Module 4M PSRAM Dual-core 32-bit CPU Development Board with OV2640 2MP Camera Module + FT232RL FTDI USB to TTL Serial Converter + 20 pin Jumper Wire.
  • FTDI USB Serial Adapter comes with the FT232RL chip and uses both 3.3V and 5V operating voltage. Adapter Logic-level can be set via jumpers on the board, which makes simple to connect to your controller. USB power has over current protection, using 500MA self-restore fuse..
  • This module supports interfaces such as UART / SPI / I2C / PWM / ADC / DAC.
Check Stock

AKZYTUE 3.7V 3800mAh 955070 Lipo Battery Rechargeable Lithium Polymer ion Battery Pack with JST Connector

  • 3.7V recheargeable Li-Po battery for Makeblock mBot robot kit..
  • The standard 2-pin JST-PH connector – 2mm spacing between pins..
Check Stock

Acxico 2 pcs ESP8266 ESP-01S + 5V WiFi Relay Module Smart Home Remote Control Unlock Board

  • This module uses genuine relays and normally open interfaces. High stability and low power consumption..
  • Strong driving ability, stable and reliable performance. High efficiency, fine workmanship, and durable..
  • Add one more ESP-01S module. This smart relay module is based on the ESP-01S WIFI module design. It can be used to DIY your own smart switch. It can be remotely controlled by the mobile phone APP and provides APP and LUA source programs. It's easy to use right away..
  • The package includes：2 pcs ESP8266 ESP-01S Relay module, relay WIFI smart socket (with ESP-01S).
  • We are very grateful for all customers’ opinions to improve sales, if you are not satisfied, please contact us to find the best solution.
Check Stock