Top Machining Fluid Reviews

Astro Tool EVOT14 EuroPro Forged EVO-T Spray Gun with Plastic Cup - 1.4mm Nozzle

Forged body provides longer tool life and anodized body for corrosion protection with internal coated passages.
Stainless steel needle and fluid tip with slick finish for faster & easier cleaning.
“Air Curtain” design to minimize overspray and pollution with superior transfer efficiency to reduce paint consumption.
Innovative, advanced EVO-T technology (Patented) providing finest atomization & classic quality.
Soft trigger pull to reduce fatigue, lubricated adjustment knobs for better control, and advanced CNC machining to avoid the need for gaskets behind the tip.

Check Stock

uxcell T-Slot Milling Cutters 3mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..

Check Stock

uxcell T-Slot Milling Cutters 6mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..

Check Stock

uxcell T-Slot Milling Cutters 4mm Depth 25mm Cutting Dia 12mm Shank Tungsten Carbide Tip 6 Flutes T Slot End Mill for Stainless Steel Copper Aluminum

T-Slot Cutters: Cutting Dia.: 25mm / 0.98".
Number of Flutes: 6 Flutes. Tungsten carbide tip has good toughness, high hardness, wear resistance, and good cutting strength. Provide faster cutting speeds than other substrates..
Wide Applications: Suitable for machining T slotting, straight slotting, side grooving and half-round keyway on the work piece. Widely used for milling stainless steel, carbon steel, alloy steel, copper, tool steel, cast iron, aluminum, etc...
Features: The cutting edge is sharp and not easy to break. High-frequency welding process is adopted for the connection between the cutter head and the cutter body. Universal chamfered round shank, easier clamping, stable cutting process..
Easy to Use: Used on drilling and milling machines, machining centers. Properly reduce the cutting speed and feed can prolong the life of the milling cutter. Add cutting fluid to protect the cutting edge and make the cutting smoother when working..
Tips: The longer the length of the tool clamped by the chuck, the better. If the clamping length is shorter, you need to lower the feed rate and cutting speed to reduce vibration and extend the tool life..

Check Stock

Milling Face, High Temperature Resistance High Speed Good Impact Resistance Facing Cutter, New Coating Technology for Precision Machining Rough Machining

Machining Range: precision machining, rough machining, plane processing and step processing..
High speed: rotary and milling feed speeds are 3 times faster than normal milling cutters..
Made of cemented carbide, which has high hardness with good impact resistance..
New coating technology is adopted on the surface, which has good oxidation resistance and high temperature resistance, it can be used for a long time..

Check Stock

SpeTool Tapered Ball Nose End Mill 1/4\ X 3\ with 0.5mm Tip Diameter(0.25mm Radius) Ball Nose 5.26Deg Router Bit for CNC Machine Engraving Carving Bits H-Si Coated

【1】Brand: XJL 【2】Name: Nano Ball Nose End Mill 65° 【3】Material: tungsten steel.
Bar: 0.4um granular tungsten steel 【4】Coating layer: NANO.
For high-hard materials and high-speed machining fields, the optimized NANO silicon nitride coating makes the tool have high-temperature stability.
【5】Number Of Flutes：2F,Spiral Angle: 35°Double edge belt + Negative rake Angle design 【6】Applicable cutting materials: Alloy steel, carbon steel, quench and tempering steel die steel HRC 55-65° of high hardness materials. 【7】Suitable for machine: CNC machining center, engraving machine, high-speed machine,dry cutting,etc.
【8】Processing methods: finish machining, semi-finish machining, curved surface machining, arc machining, irregular machining.
【9】Main features:milling cutter for high-hardness and high-speed cutting applications. The edge is coated with NANO-BLUE coating, which can directly perform high-speed rough machining and fine machining on heat-treated materials below 65°, reduce the number of tool changes, advance the productivity of machine tools, save the groove design and grinding method of manufacturing time, and have the advantages of high chip conduction, AG, long service life and high surface finish after machining..

Check Stock

TOPINTECH Stainless Steel Well Pump 1HP 110V 20GPM 223ft Head Deep Well Submersible Pump for Domestic, Civil and Industrial

... 100-120V. Pure copper core motor, F-class insulation enameled copper wire, pumping power is more adequate, more safe and reliable..
✔【NEMA Standards】In strict accordance with the National Electrical Manufacturers Association NEMA standards. The advanced rotor spline machining process ensures the hardness, finish, precision, consistency and wear resistance of the rotor, reducing rotor wear at high speeds and ensuring smooth motor operation..
【Wide Application Scenarios】Accurate IAE pressure balance design makes the motor dive deeper；TOPINTECH's special mechanical seal for deep-well pumps for longer motor life；High strength anti-sand fluid components can applied to harsh working conditions. They can be used for deep well/ water tower water supply, agricultural irrigation, livestock breeding, river, reservoir, canal and other water lifting projects..

Check Stock

Ladieshow MT2-FMB22 Face Mill Holder + 400R-50-22 CNC Lather End Milling Cutter + 10pcs APMT1604 Carbide

Sturdy and Durable: The end mill set is made of carbide material, with high hardness, high strength, not easy to deform and damage, good impact resistance and long service life.
High-Precision Machining: The milling cutter kit adopts high-precision machining technology, and the surface adopts new coating technology, which has good oxidation resistance and high temperature resistance.
Machining Range: Face CNC milling cutters are suitable for precision machining, roughing, flat and step machining and are the ideal toolkit for heavy duty CNC milling.
High Speed: Face end mills have better cleanliness and more stable accuracy, and the rotation and milling feed rates are 3 times faster than ordinary milling cutters.
Widely Used: Face milling cutter is a common main accessory for milling CNC machine tools, fixture milling machines, horizontal boring machines, ordinary boring and milling machines, drilling machines, bench drills and small machine tools.

Check Stock

Mobil 100545 Vactra No.4 Way Oil 1 gal

Excellent Metal Wetting & Adhesiveness - Prevents separation of lubricant from machining surfaces.
Improved Frictional Properties - Eliminates stick slip and enables accurate machining.
Improves Chatter and Scoring - Enables consistant machining operations.
Compatible with Multiple Materials - Suitable for wide range of materials.
Superior Rust and Corrosion Protection - Enables reduction of sliding surface deterioration.

Check Stock

3PCS BAP300R C10-10-120-1T/C12-12-130-1T/C12-13-130-1T 1Flute Indexable End Milling Holder+ 6PCS APMT1135PDER CNC Inserts+3PCS T8 Wrench (3PCS 300R End Milling Holder)

* Package includes ：1PCS 300R C10-10-120-1T +1PCS 300R C12-12-130-1T+1PCS 300R C12-13-130-1T+ 6PCS APMT1135PDER + 3PCS T8 wrench. If you need more APMT1135PDER, please search ASIN：B097RG372M..
* High performance replaceable inserts, anti-seismic high-quality alloy steel, can effectively suppress vibration..
* It is suitable for rough machining, finish machining, digging machining, groove machining and cutting machining..
* The screw offset fastening design makes the inserts and groove closely combined, enhances the rigidity, and the processing effect will be better..
* The handle strictly abides by the process of first vacuum quenching and then tapping to avoid the deformation caused by first tapping and then quenching. It is firm and durable and can prolong the service life..

Check Stock

HTD 3M 150-5100 Close Loop Timing Synchronous Belt 10/15/20mm Width 3mm Pitch

Specifications: 4M11T, outer diameter: 52mm, inner hole: rough machining.
Specifications: 4M13T, outer diameter: 60mm, hole: rough machining.
Specifications: 4M15T, outer diameter: 68mm, hole: rough machining.
Fast Shipping Guarantee: All parcel will be delivered in 7-15 days.

Check Stock

Zouzmin Carbide Insert APGT1135PDFR-G2 Milling Insert for Aluminum Alloy (APGT1135PDFR-G2)

Machining: Copper And Aluminum Medium Finish Machining.
Allows Faster Machining And Leaves Better Finished on Metal Parts, Reduce the Downtime Required to Change Edges and Easily to be Replaced..

Check Stock

Amerock Full Inset Partial Wrap Free Swinging Minaret Tip Hinge for 3/4\ Doors Oil Rubbed Bronze Single (1)

Use bit (AWM5R) for the door machining and (AWM5AJ) for the face frame machining.

Check Stock