Top Low Rpm Motor Reviews

Mini Electric Motor 30W Permanent Magnet DC Motor 12V/24V High Speed CW/CCW (DC 24V 6000RPM)

Permanent magnet dc motor high speed with long output shaft,easy to install..
DC 12V 3000RPM or DC 24V 6000RPM,2 size for your choice..
The stator windings of the motor are copper wire, low heat, low loss, long life,and with CW/CCW control..
Widely used in cotton candy machine, small cutting bench, grinding machine, medical equipment and other mechanical equipment..
Mini Size- Motor body (Diameter x Height) 5.1cm/2 inch x 7.1cm/2.8 inch..

Check Stock

ARCTIC P12 PWM PST - 120 mm Ventola per CPU, PWM Sharing Technology, Pressione Statica, Connessione PST, Velocità 200-1800 RPM, 0,3 Sone - Nero

OPTIMISED FOR STATIC PRESSURE: During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure.
200 TO 1800 RPM REGULATED VIA PWM PST: Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed.
EFFICIENT TECHNOLOGY: The motor is powered by a latest generation PWM IC, achieving higher efficiency and saving energy without compromising performance.
EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature.
TECHNICAL DATA: Fan speed: 200–1800 RPM, Airflow: 56.3 CFM/95.65 m³/h (@ 1800 RPM), Noise Level: 0.3 Sone (@ 1800 RPM), Pin: 4-pin.

Check Stock

AmpFlow E30-150 Brushed Electric Motor, 12V, 24V or 36 VDC, 5600 RPM

Fundamental Parameters: This brushless go kart motor is powerful and efficient. Input Voltage: 48V DC, Output Power: 1800W, Rated Current: 33A, Rated Speed: 4500 RPM, Maximum Speed: 5200 RPM, Sprocket: T8F-9T, Maximum Current: 37.5A. Package includes: 1 x Brushless DC Motor, 1 x Speed Controller,1 x Throttle Grip, 1 x Screw Set, 2 x Wrench..
1800W Brushless Motor: The dc electric go kart brushless motor adopts a 100% copper core for low noise operation and excellent speed regulating performance. The high-precision rotor features high-tech components, a clean finish for water resistance, and high working efficiency. Get ready to leave the competition in the dust..
Sturdy Aluminum Construction: The electric brushless dc motor kit features an aluminum alloy shell that resists heat, cold, and deformation, ensuring it will not rust easily. This dc electric motor is a forward and backward rotation motor so that you can switch rotation gears effortlessly..
Speed Controller Included: This dc electric motor brushless comes with a controller to provide speed control at a desirable range, speed adjustment method: Potentiometer. Model: BY15WF01-A, Current: 33A, Phase Degree: 120°, Conversion Efficiency: 90%, Under Voltage Protection Voltage: 41±0.5V..

Check Stock

EBIKELING Waterproof Ebike Conversion Kit for Electric Bike 26" Front or Rear Wheel Electric Bicycle Hub Motor Kit, 500W, Rear/LCD/Thumb

Kunray MY1020 Brushless Motor Features: Electric Brushless DC Motor, Aluminum Body, Full Copper Coil, Heat Resistant, Naturally Air Cooled, Low Noise High Quality More Long Life..
BLDC Scooter Motor: Brushless High Speed Mid Drive Motor, Voltage 72V DC, Rated Power 3000W peak, Current 45A, Rated Speed 4900rpm/min, (Max 5800RPM), T8F 11Teeth Sprocket, Load Weight: About 100-200kg. NOTE: motor speed according to your load-weight and others..
BLDC Controller: Voltage 48-72V, Proctect 42 volt, Power 3000 watt, 24 mosfet, Current 50 amp, Phase Degree: 120°, Smart Controller Can Work With Hall Sensor And Without hall, Brushless Motor Speed Controller, E-Brake, 3-Speed (Low Mid High Speed), Reverse Functions, Indicator Light And Power Lock Functions..
Handlebar Twist Throttle: Universal Accelerator Handlebar Throttle Twist Grips, 12V-72V Universal, With 3 Speed (High,Mid and Low Speed) And Reverse Functions, Wire Length About 150cm ( 59 inch) , High Quality Rubber And ABS Material..
Useful: Suit For Electric Scooter, Mini Electric Motorcycle DIY Engine Kit, Razor Push Scooter, Ebike Bicy....

Check Stock

ARCTIC P12 PWM PST (5 Pack) - 120 mm Case Fan, PWM Sharing Technology (PST), Pressure-optimised, Value Pack, Very quiet motor, Computer, 200-1800 RPM - Black

OPTIMISED FOR STATIC PRESSURE: During the development of the new P12 PWM PST, special emphasis was placed on a focused airstream and thus a high static pressure.
200 TO 1800 RPM REGULATED VIA PWM PST: Thanks to 4-pin connector, the RPM can be regulated in a broad spectrum via PWM, noise is kept at minimum while maximum cooling performance is given when needed.
EFFICIENT TECHNOLOGY: The motor is powered by a latest generation PWM IC, achieving higher efficiency and saving energy without compromising performance.
EXTENDED LIFE SPAN: A 10 °C lower motor temperature roughly doubles the life span of a fan, the new ARCTIC motor has a four times longer service life through its low coil temperature.
TECHNICAL DATA: Fan speed: 200–1800 RPM, Airflow: 56.3 CFM/95.65 m³/h (@ 1800 RPM), Noise Level: 0.3 Sone (@ 1800 RPM), Pin: 4-pin.

Check Stock

L’UGX Professional Nail Drill, 35000RPM Rechargeable Nail Efile, Portable Electric Nail File Machine for Acrylic, Gel Nails, Manicure Pedicure for Home Salon Use (Klein Blue)

【Update 35,000RPM Coreless Motor】Equipped with an updated high-quality bearing coreless motor, enables this electric nail file works smoothly even at a high speed (0-35000 RPM) by rotating the speed control knob. Ultra-smooth operation with lower heat and lower noise, ideal for both professional technicians and nail students in the salon or at home..
【Rechargeable Cordless Nail Drill】With a built-in 3000mAh battery, can provides 8-10 hours of use with only 2-2.5 hours of charge. Your operation status will be displayed on the smart LCD screen, including the RPM, direction, and the battery. Freedom to work in any place even there is not an electrical outlet..
【Low Noise and High Quality】With the powerful coreless motor which have triple power of an ordinary motor, but it works in smooth vibration and low noise. This high quality motor can be used more than 15,000 hours with low consumption and stable performance..
【Compact and LightWeight】Designed with a high-quality aluminum alloy and cyanide free copper plating, body and pen only weight 0.88lb and it is compact enough(6.1*2.8*1.1inch) to pack into your traveling bag or case, let you enjoy the nail art DIY anytime anywhere..
【100% AfterSales Service】We have CE/ROHS/MSDS Certificat....

Check Stock

YYQTGG Miniature Vibration Motor, Coreless Vibration Motor Sturdy Low Noise Professional for Beauty Instrument

Robust Aluminum Construction: The electric brushless dc motor kit is made of an aluminum alloy shell that withstand heat, cold, and deformation, ensuring it will not rust easily. This dc electric motor is a forward and backward rotation motor, so you can easily switch the rotating gear..
Basic Parameters: This brushless go kart motor is strong and efficient. Input Voltage: 48V DC, Output Power: 2000W, Rated Current: 34A, Rated Speed: 4300 RPM, Maximum Speed: 5400 RPM, Maximum Current: 42A, Sprocket: T8F-11T. Package includes: 1 x Brushless DC Motor, 1 x Controller, 1 x Multi- purpose Wrench, 1 x L-Shaped Wrench, 1 x Screw Set..
2000W Brushless Motor: DC electric go kart brushless motor adopts 100% copper core, with low operating noise and excellent speed regulation performance. The high-precision rotor is made of high-tech components, with a glossy surface, waterproof and high efficiency. Get ready to let the race dust settle..
Speed Controller Included: This dc electric motor brushless is equipped with a controller, which can provide speed control within the ideal range. Speed adjustment method: Potentiometer. Model: BY15WF02-A, Current: 34A, Phase Degree: 120°, Conversion Efficiency: 90%, Under Voltage Protection Voltage: 41±0.5V..

Check Stock

BLDC 72V 3000W Brushless Motor Kit with 24 Mosfet 50A Controller and Throttle for Electric Scooter E Bike Engine Motorcycle DIY Part Conversion Kit (6 Part in 1 and Motor with Foot)

Kunray MY1020 Brushless Motor Features: Electric Brushless DC Motor, Aluminum Body, Full Copper Coil, Heat Resistant, Naturally Air Cooled, Low Noise High Quality More Long Life..
Motor Type: Brushless DC High Speed Motor, Mid Drive, Voltage 72VDC, Rated Power 3000W Max, Current 45A, Rated Speed 4900rpm/min, Max 5800RPM, T8F 11Teeth Sprocket Chainwheel,Load Weight:100-200kg About..
BLDC Controller: Voltage 48-72V, Proctect Vol 42V, Power 3000W, 24 Mosfet, Current 50A, Phase Degree: 120°, Smart Controller Can Work With Hall Sensor And Without Hall Motor, Brushless Motor Speed Controller, E-Brake, 3-Speed (Low Mid High Speed）, Reverse Functions, Indicator Light And Power Lock Functions..
Handlebar Twist Throttle: Universal Accelerator Handlebar Throttle Twist Grips, 12V-72V Universal, With Accelerator, 3 Speed (High Speed Mid Speed Low Speed) And Reverse Functions, Wire Length ABout 59inch, High Quality Rubber And ABS Material..
Suit For: Electric Scooter, Mini Electric Motorcycle DIY Engine Kit, Razor Push Scooter, Ebike Bicycle, Go Karts, E-bike, E Tricycle,Mid Drive Motor Kit, Complete Set,DIY Engine System, Cycling Part,And More. What You Get: 1pcs Motor, 1pcs Controler, 1pair Throttle, And Manual..

Check Stock

40,000 RPM Electric Nail Drill Machine & Power Bank 2 in 1, Professional Nail Drills for Acrylic Nails, Portable Portable & Rechargeable Nail Drill Electric Nail File , Acrylic Efile for Gel Nails

【Update 35,000RPM Coreless Motor】Equipped with an updated high-quality bearing coreless motor, enables this electric nail file works smoothly even at a high speed (0-35000 RPM) by rotating the speed control knob. Ultra-smooth operation with lower heat and lower noise, ideal for both professional technicians and nail students in the salon or at home..
【Rechargeable Cordless Nail Drill】With a built-in 3000mAh battery, can provides 8-10 hours of use with only 2-2.5 hours of charge. Your operation status will be displayed on the smart LCD screen, including the RPM, direction, and the battery. Freedom to work in any place even there is not an electrical outlet..
【Low Noise and High Quality】With the powerful coreless motor which have triple power of an ordinary motor, but it works in smooth vibration and low noise. This high quality motor can be used more than 15,000 hours with low consumption and stable performance..
【Compact and LightWeight】Designed with a high-quality aluminum alloy and cyanide free copper plating, body and pen only weight 0.88lb and it is compact enough(6.1*2.8*1.1inch) to pack into your traveling bag or case, let you enjoy the nail art DIY anytime anywhere..
【100% AfterSales Service】We have CE/ROHS/MSDS Certificat....

Check Stock

Mophorn Wood Lathe 8\ x 12\

1/3 Horse Power Motor: 1/3 Horse Power motor, turning speed 4500RPM, Voltage: 110V. The powerful motor starts softly offering motor's maximize safety and low noise..
Unrivaled Speed Control: Turning speed control knob clockwise or counterclockwise to adjust speed freely within 500-3200 RPM. MT1 Spindle..
Large Work Capacity: 12" / 305 mm distance between centers, swing over bed 8" / 203 mm. High concentricity. Moving tailstock to adjust proper distances for workpieces..
Cast Iron Construction: Cast iron constructed wood lathes for durability and strength, providing increased stability and smooth operation. Extremely sturdy cast iron construction to reduce vibration..
Extensive Application: Moving the lock lever to adjust or replace the tool rest. 150 mm and 300 mm tool rests for easy replacement, ideal for a variety of turning projects, such as pens, bowls, cups, chess pieces, and other small workpieces in labs, workshops, engineering education, etc..

Check Stock

CHANCS TYC-50 Synchronous Motor 12V DC 5-6RPM CW/CCW 4W Electric Gear Motor For Christmas Decorations

Model : TYC-50； Shaft Diameter: 7mm ； Shaft Length: 16mm； Direction : CCW/CW(uncontrollable)； Voltage : DC 12V； Speed : 5-6RPM； Power :....
This is a TYC-50 DC 12V 5-6RPM synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
Widely used in hand-made, school project, electric fan shake heads, heaters, Christmas tree, prayer cylinders, air conditioners, microwave ovens, glue....
Motor shaft, line length, speed, voltage can be designed according to customer requirements. If you need other models of motor, you can contact us.....
Attention: The applicable voltage of this motor is DC 12V, using AC power supply, the motor does NOT work.
too high voltage will burn the motor.If you....

Check Stock

CHANCS TYZ42 Synchronous Motor TYC-40 AC 12V 5RPM Shaft Length 46MM for Fiber Optic Christmas Ornament …

This is a TYC-40 AC 12V 5RPM CW/CCW synchronous motor,small power consumption, low noise, small size, light weight, easy to use. The reduction gear is....
【Specification:】 Product Name : Synchronous Motor； Model : TYC-40； Speed: 5RPM； Shaft Diameter: 4.5mm ； Shaft Length: 46mm； Shaft Screw....
【Application:】 Widely used in Christmas tree, decorative colored lights, hand-made, school project, electric fan shake heads, heaters, prayer....
【Attention:】 The applicable voltage of this motor is AC 12V, USING DC POWER SUPPLY, THE MOTOR DOES NOT WORK!! And too high voltage will burn the....
【Package Content:】1PC x Synchronous Motor.

Check Stock

ARCTIC P8 PWM - 80 mm Case Fan with PWM, Pressure-optimised, Very quiet motor, Computer, Fan Speed: 200-3000 RPM - Black

200 TO 3000 RPM REGULATED VIA PWM: With the 4-pin connector, RPM can be regulated in a broad spectrum via PWM, noise is kept at a minimum while maximum cooling performance is guaranteed when needed.
OPTIMISED FOR STATIC PRESSURE: During the development of the new P8 PWM, special emphasis was placed on a focused AIRSTREAM and thus a high static pressure.
EFFICIENT TECHNOLOGY: The motor is powered by a latest generation PWM IC, achieving higher efficiency and saving energy without compromising performance.
MAXIMUM QUIETNESS, MINIMUM VIBRATION: Even at low speeds The operating sound of the new ARCTIC motor is barely noticeable.
TECHNICAL DATA: Fan speed: 200–3000 RPM, Airflow: 23.4 CFM/39.76 m³/h (@ 3000 RPM), Noise Level: 0.3 Sone (@ 3000 RPM), Pin: 4-pin.

Check Stock