Top Laser Wire Reviews

DTOL 10pcs 5V 650nm 5mW Red Dot Laser Head Red Laser Diode Laser Tube with Leads Head Outer Diameter 6mm

  • Economical Red Dot Laser - Low cost solution for consumer grade positioning, measuring, pointing and laser sighting device. Please notice: laser modules are not stand alone item. They are not supposed to be sold with any power source, power supply, or wiring terminals. Because modules are simply components, and it means that you have to wire it to your own power source by yourself..
  • Wave length: 650nm. Output power: Class IIIa – less than 5mW. 2.6~5 VDC operation. Beam Divergence (Half Angle) : 0.6 mRad. Beam shape: oval, not perfect circular. Dimensions: D7 x 21 mm..
  • Red laser. Ideal Laser module if cost is a very important consideration. Notice: This item is not a laser pen. Laser modules are not supposed to be used for commercial use like normal laser pointers..
  • This module has an integrated optic, laser diode, and APC driver circuit. APC driver circuit enables constant Laser output power..
  • Aspherical plastic lens provides Dot spot. The operation voltage is 2.6~5 VDC. Please make sure that you connect this module to the appropriate voltage (2.6~5 VDC)..
Check Stock

Sniper FL3000 Tactical Green/IR Laser Sight Combo Fit Night Vision

  • IR Laser Sight Fit Night Vision. Infrared LED/Laser: 850 nm. Please note that the infrared laser beam is only visible when using NIGHT VISION EQUIPMENT..
  • Durable aerospace aluminum, coupled with a water tight design..
  • Easy to control – Comes with wire cable remote control pressure pad switch. Please note that top rail CANNOT be removed..
Check Stock

Channellock 908 Wiring Tool

  • Cuts bolt sizes: 10-24, 6-32, 8-32, 10-32, 4-40.
  • Laser etched marking for lasting indication of wire gauges.
Check Stock

3-Axis 32-bit ARM Based CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling,Support 500W Spindle/NEMA23 Stepper Motor/Laser (A4988+Fan)

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Milwaukee 48-22-4106 6 in 1 Diagonal Pliers, 6-Inch

  • It also has easy to read wire gauge marking on both sides of the tool for stripping in either directions.
  • The handle is color coded, red meaning stranded wire.
  • Reaming Head Design-Smooth Edges of Metal Pipe From 1/2-Inch to 1-Inch (Patent Pending).
  • Bolt Cutter-Thread and cut #6 and #8 bolts to preferred length (Patent Pending).
  • High Leverage Design - For cutting power and performance.
  • Laser Hardened Cutting Edges - Cuts wire.
  • Offset Head Design - 15 Degree offset head for easier and quicker prying and pulling (Patent Pending).
Check Stock

ANNOYTOOLS ARM 32-bit 3-Axis CNC Controller,GRBL 1.1F USB Port CNC Engraving Machine Control Board with Fan Cooling DRV8825 Standalone Driver,Support 500W Spindle/NEMA17/23 Stepper Motor/Laser Module

  • Model:3 Axis GRBL 1.1F USB Port GRBL Control Board.
  • Input voltage: 12-24VDC .CNC Router Machine Controller board.
  • Compatibility: support 12V/24V laser, TTL/PWM modulation signal, 3P interface and 2P+2P interface.
  • support 775 motor, 200W/300W/500W spindle.
  • support dual Y-axis use, three-axis and two-axis switching use.
  • support X/Y/Z limit switch, Z-axis probe, emergency stop switch.
  • Support stepper motor: 12V, within 2A maximum current, within 1.5A recommended. (Stepper motor 42, 57).⚠️Please check the wire sequence when connecting the stepper motor, the wire sequence may be different for different motors, wrong connection may burn the motor and the motherboard..
  • Support software：LaserGRBL/Lightburn/Candle(3 axis)/Universal Gcode Sender.
  • Tip: Before you connect the motherboard, please carefully check the need to connect the device wire sequence (laser, motor) to prevent a mismatch of wire sequence, burn the device. Customer service 24H online, to provide you with help..
Check Stock

Chamberlain CLLP1-P Aid/Assistant CLLP1, Laser Identifies Perfect Parking Spot, Works Brand Garage Door Opener Accessory

  • More control: the Laser Park Assist helps you find the perfect parking spot every time Powered by the garage door opener, a bright red laser beam activates as the garage is opened, tracks along the vehicle’s hood as it enters until it reaches the preset marker, and indicates when to stop The laser will automatically deactivate after one minute.
  • Highly compatible: specifically designed to work in tandem operation with nearly every Chamberlain, LiftMaster and Craftsman garage door opener installed in North America, it’s the most seamless and advanced parking solution to add to your garage system.
  • Easy setup: simply mount it to the ceiling, power it up and program your preferred parking location.
  • Simply safe: protect even the tightest garage space from damage by programming up to two Laser Park Assists with a single garage door opener.
  • Included: anchor, screw, two wire nuts, power adapter, and instructions.
  • Class II laser product, 1mW power output.
Check Stock

Klein Tools K12065CR Wire Stripper/Cutter/Crimper Tool for Cutting, Stripping, Crimping, Twisting (8-18 AWG solid, 10-20 AWG stranded)

  • Laser etched marking for lasting indication of wire gauges.
Check Stock

MICTUNING LS09901 7 Pin Momentary Laser Rocker Switch Winch in/Out, 20 Amp/12V, Black

  • Laser etched backlit with two LED lights.
  • Single pole double throw on-off-on switch.
  • All symbols are laser etched directly onto the switch face to ensure long image life.
  • Black hard surface rocker, with 3pcs shot wire and connectors.
Check Stock

Platinum Tools EZ-RJ45 Crimp Tool for RJ-11, RJ-12 and RJ-45

  • Crimps and trims extended wire in EZ-RJ45® Connector in a single cycle.
  • Also compatible with all stranded modular plugs (except AMP).
  • Laser marked with wiring guide for proper wire sequence.
Check Stock

Bosch Automotive (8165) OE Fine Wire Double Platinum Spark Plug - Single

  • Laser welded Platinum inlay ground electrode provides 3X longer service life compared to standard copper plugs.
  • Fine wire Platinum firing pin for better ignitability and performance.
  • Unique 360 continuous laser weld fuses corrosion resistant Platinum firing pin to base.
  • Nickel-plated rolled threads provide superior resistance to corrosion and do not require anti-seize for installation.
  • Bosch Double Platinum spark plugs are pre-gapped at the factory and do not require a gap adjustment prior to installation.
Check Stock

Creality 3D Printer Laser Engraver Module Ender 3 Laser Engraving Attachment 1.6W 12V/24V 450nm Blue-Violet Light, Magnetic Design, with Goggles and Wood Pieces, Upgrade for Ender 3/5 Pro, CR-10

  • Premium Laser Diode: Featuring reliability, high stability and high efficiency, the premium laser diode in this module allows for excellent laser beam quality..
  • Adjustable Focus: Users can adjust the focus by rotating the laser head according to the working distance to find the optimal spot size..
  • Fast Heat Dissipation: Equipped with a large aluminum heatsink, cooling DC fan, and an added hole to improve air flow, all of them contribute a fast and efficient heat dissipation, allowing for prolonged service life..
  • Easy to Use: Just clip the module magnetically to the print head, wire it to the motherboard, and installation is done. No firmware upgrade is needed..
  • Compatibility and Application: The laser module is compatible with Ender 3, Ender 3 Pro, Ender 3 Max, Ender 5 Series, CR-10 and printers with controllable fan ports. It can be used to engrave wood, leather, paper, and bamboo..
Check Stock

MICTUNING Backlit LED LIGHT BAR Symbol Push Button with Wiring Kit ON-OFF Switch Compatible with Toyota Blue Surface Size 1.28 x 0.87 inches

  • PERFECT FIT - This high quality SPST (Single Pole Single Throw) ON-OFF push switch is manufactured to fit in the OEM space available in your car.....
  • HIGH QUALITY - Laser etched directly onto the switch face using modern high tech laser engraving equipment to ensure long image life. Features a....
  • STURDY DURABILITY - The switch is made out of heavy duty ABS plastic and come in a mate black surface color. The surface size is 1.54" x 0.83". It has....
  • EASY INSTALL - Rated at 3Amp 12V, comes with connector wire kit, easy to install. It is simple to connect the switch: The Green wire goes to the....
  • WIDE APPLICATION - The switch compatible with most vehicles, PLEASE SEE LIST BELOW FOR VEHICLE COMPATIBILITY, and make sure it fits before purchase.....
Check Stock