Top Lag Screw Lengths Reviews

Hakkin 3/8 Hex Lag Bolts Wood Screws 60PCS Assorted Wood Screw & Bolt Assortment Sets 1-1/2 2 2-1/2 3 3-1/2 4 Hexagon Head Lag Bolts for Wood Decks Building,Industrial

• 1.【Premiun Material ＆ Mighty Grip】Heavy duty screw bolts are made from 304 stainless steel and no exterior finish, greater strength and corrosion resistance performance than regular stianless steel or zinc plated fasteners.These lag bolts for wood is coarse threads for superior holding, will not strip off..
• 2.【Standard and Various Sizes】The hex lag bolts kit includes 6 different most common used sizes:3/8×1-1/2"，3/8×2"，3/8×2-1/2",3/8×3",3/8×3-1/2",3/8×4".
• Quantity: 60 pieces screws and washers in total (30 sets)..
• 3.【Project Center】These stainless steel lag screws are great for exterior household securing wood works industrial applications such as deck building or joining lumber，and DIY design..
• 4.【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
• Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
• 5.【Guarantee in Hakkin】Hakkin hex lag screws undergo rigorous ins....

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

• Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
• Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
• Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

• Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
• Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
• Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, ....

Century Drill & Tool 68700 Eye Lag Driver 1/4 Hex

• Hardened steel body for professional Acoustic ceiling installs.
• Easily drives eye lag screws into wood or metal with any drill or screw gun.
• Compatible with all wood and self-tapping eye lag screws.

#14 x 4\ Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - Full Box - 500 Screw Count

• Manufactured from High Quality Heat Treated Steel, Triple Coated, and ACQ Treated Lumber Compatible.
• Corrosion Resistant Exterior Coated Screws Passed 1200 Hour Salt Spray Test Without Coating Failures.
• .24 (#14) Thread Diameter, .508 Head Diameter Modified Truss Head Screw for Better Compression Force.
• These Construction Lag Screws Far Exceed Standard Lag Bolts in Shear Compression Forces.
• Excellent Screw for Decking, Fencing, Roofing, Framing, Timber Frame or Post, and Beam.

48 Pack Swage Lag Screws Left & Right for 1/8\ Cable Railing kit,T316 Stainless Steel Stair Deck Railing Wood Post of Cable Railing Kit, Decking Railing Hardware, DIY Baluster Kit

• 【LEFT & RIGHT DESIGN】 With the Left hand lag screws and Right hand Lag Screws design, it can rotate wire rope in the same direction, which resolves the problem of twisting the wire rope. Products without Left & right design might damage the cable. The wrench multi-tool is handy, it will help you drill the lag screw into the wood easily..
• 【PROTECTOR SLEEVES】 These stainless steel protector sleeves will prevent the wire cable from wearing into the post, and maintain the cable rail tension for preventing wire rope vibration..
• 【COMPATIBILITY】 These Cable Railing Kits are suitable for 1/8" diameter wire rope cable railing system, perfect for DIY your own wood baluster post stair or decking railing project, good for indoor or outdoor applications..
• 【HIGH-QUALITY 】 Made of premium stainless steel for weather-tough durability, super-strong resistance to rust and corrosion, low maintenance and lasting beauty..
• 【WHAT YOU WILL GET】 The cable railing kit includes 30 PCS left handed thread swage lag screws, 30 PCS right handed thread swage lag screws, 80 PCS protector sleeves, 2 PCS drill bits (The 6.5mm drill bit is used for drilling the protector sleeves holes, and the 5mm drill bit is used for drilling the lag screws holes), 1 PCS wrench..

Hard-to-Find Fastener 014973457334 Phillips Flat Machine Screws, 1/4-28 x 3, Piece-10

• Assorted sizes and lengths of commonly used electrical machine screws.
• Phillips round-head screws for switches, receptacles and outlet applications.
• 20 each of 6 different screw sizes included.
• Kit arrives sturdy reusable sturdy organizing case.
• Clear case back offers easy visual of screws inside without opening.

#17 x 6 Construction Lag Screw Exterior Coated Torx/Star Drive Heavy Duty Structural Lag Screw Far Superior to Common Lag Screws - Modified Truss Washer Head - 100 Screw Count

• Screw Dimensions - ~5/16" Thread Diameter - 11/16" Head Diameter - Length 6".
• Manufactured from High Quality Heat Treated Steel, Triple Coated, ACQ Treated Lumber Compatible.
• Corrosion Resistant Lag Screws Passed the 1200 Hour Salt Spray Test Without Coating Failures.
• Type 17 Notched Extra Sharp Point for Quick Starts without "Walking", Reduces Need for Pre-Drilling.
• Construction Lag Screws Far Exceed Standard Lag Bolts in Sear Compression Forces.

5/16\ Expansion Shield Anchor Double Zinc Alloy Pk 25

• ANCHOR IS MADE FROM RUST RESISTANT MATERIAL-Can be used in areas where moisture is present if the bolt used is rust resistant.
• BOLT EXPANDS ANCHOR-No setting tool required.
• WORKS IN MOST MASONRY MATERIAL-Versatile for wide range of applications.
• LAG SCREWS MUST BE USED-Easy to find many lengths and diameters.

ECKJ Hex Lag Bolts 112PCS M6 Hex Head Lag Screws Washers Assortment Kit Fully Thread Heavy Duty Hexagon Wood Screw Zinc Plated Black Metric Length Include 16/20/25/30/35/40/45/50/60mm

• 【112PCS of 9 Sizes】 Hex head diameter is 10mm, thread diameter is 6mm, 9 sizes of screw length are 16mm, 20mm, 25mm, 30mm, 35mm, 40mm, 45mm, 50mm, 60mm. Flat washer outer diameter is 12mm..
• 【Quality Material】 Black lag screws are made of high quality carbon steel, high hardness and with beautiful appearance, zinc plated is smooth and anti-rust..
• 【Lag Screw with Washer】 these bolt screws feature deep wood screw coarse threads for superior holding. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
• 【Wide Application】These metal wood screws are great for exterior household and industrial applications such as pergolas, garden beds, mailboxes, deck building, joining lumber or any DIY projects..
• 【Note】 This item contains small and sharp parts, please keep it away from kids. We guarantee 100% satisfied after-sales service! If you had a problem, please let us know before leaving a review..

Stainless 1/4 x 1-1/4\ Hex Lag Screw (1\ to 5\ Lengths Available in Listing), 18-8 Stainless Steel, 50 Pieces (1/4 x 1-1/4\)

• Tensile - 100,000 psi to 125,000 psi, Hardness - 85 Rockwell B.
• 1/4 x 1-1/4" Hex Head Lag Screw (also know as lag bolt).
• Great corrosion resistance for outside applications.

Stainless 5/16 x 1-1/2\ Hex Lag Screw (1\ to 5\ Lengths Available in Listing), 18-8 Stainless Steel, 25 Pieces (5/16 x 1-1/2\)

• Tensile - 100,000 psi to 125,000 psi, Hardness - 85 Rockwell B.
• 5/16 x 1-1/2" Hex Head Lag Screw (also known as lag bolt).
• Great corrosion resistance for outside applications.

Hillman Fluted Plugs 1 \ Blue 100/Box