Top Stainless Lag Eye Screw Reviews

Muzata 20Pack 1/8\ Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 10 Pairs CK17

Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....

Check Stock

Muzata 60Pack 1/8' Swage Lag Screws Left & Right Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck WoodBudget System 30 Pairs CK17

Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:30pcs left-hand lag screws,30pcs right-hand lag screws,1pc drill bit,1pc spanner.
Clean Look and Durability-Muzata cable railing system with 1/8" swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4" sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
Wide Application-These 1/8" cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, we rec....

Check Stock

Muzata 20Pack 1/8' Black Swage Lag Screws Left & Right Black Cable Railing Hardware Kit Handed Thread for Wood Post T316 Stainless Steel Stair Deck NeatBlack System 10 Pairs CK17, CA7

Left&Right Feature-T316 stainless steel right&left handed thread swage lag screws rotate wire rope in the same direction without twisting or damaging the wire rope. By aggressive threads, lag screws can be firmly tightened to the post. Unprofessional crimping tools may not secure crimping even damage the lag screws. Recommend to use with professional Hydraulic Crimper (Muzata CR09).Package includes:10pcs left-hand lag screws,10pcs right-hand lag screws,1pc drill bit,1pc spanner.
Clean Look and Durability-Muzata cable railing system with 1/8″ swage lag screw has a cleaner look and better view. They are made of T316 stainless steel, which has excellent resistance to rust, ideal for indoor or outdoor, even coastal applications. For code of compliance, recommended tension shall be at least 200 lbs to pass the 4″ sphere test. The maximum span between two end posts is 15Ft, post spacing not exceeding 4ft, cable spacing less than 4inch.
Wide Application-These 1/8″ cable railing hardware can apply to horizontal, angled or vertical sections. You don’t need extra tensioners or terminals to finish the whole railing project. Also, they can drill into the two adjacent sides of the corner post without hitting each other. For the wood post with a PVC sleeve, ....

Check Stock

48 Pack Swage Lag Screws Left & Right for 1/8\ Cable Railing kit,T316 Stainless Steel Stair Deck Railing Wood Post of Cable Railing Kit, Decking Railing Hardware, DIY Baluster Kit

【LEFT & RIGHT DESIGN】 With the Left hand lag screws and Right hand Lag Screws design, it can rotate wire rope in the same direction, which resolves the problem of twisting the wire rope. Products without Left & right design might damage the cable. The wrench multi-tool is handy, it will help you drill the lag screw into the wood easily..
【PROTECTOR SLEEVES】 These stainless steel protector sleeves will prevent the wire cable from wearing into the post, and maintain the cable rail tension for preventing wire rope vibration..
【COMPATIBILITY】 These Cable Railing Kits are suitable for 1/8" diameter wire rope cable railing system, perfect for DIY your own wood baluster post stair or decking railing project, good for indoor or outdoor applications..
【HIGH-QUALITY 】 Made of premium stainless steel for weather-tough durability, super-strong resistance to rust and corrosion, low maintenance and lasting beauty..
【WHAT YOU WILL GET】 The cable railing kit includes 30 PCS left handed thread swage lag screws, 30 PCS right handed thread swage lag screws, 80 PCS protector sleeves, 2 PCS drill bits (The 6.5mm drill bit is used for drilling the protector sleeves holes, and the 5mm drill bit is used for drilling the lag screws holes), 1 PCS wrench..

Check Stock

Bungee Brake Kit (20FT)

HEAVY DUTY BLOCK: Accepts cable up to 1/2" in diameter, includes heardware and rubber bumper for impact with trolley.
BUNGEE CORD: Superior quality 1/2" Bungee cord knotted on both ends come ready to install..
QUICKLINKS: 3/8" Quick Links connect looped ends of bungee to block on one end and tree or post on other end..
EYE LAG SCREW: 3/8" X 3 3/4" beefy screw sinks into tree bark or 4x4 anchor post. Also includes backup cable sling to secure in place..
INSTRUCTIONS: Complete Installation & Safety Handbook for entire zip line system, not just bungee brake..

Check Stock

1/4 Hex Lag Bolts 1 1-1/2 2 2-1/2 3 JROUTH 155PCS Black Oxidized Hex Lag Screws Heavy Duty Wood Screws Washers Assortment kit Stainless Steel 18-8 304

【Certified Stainless Steel】Black lag bolts are made from 18-8 (304) stainless steel and coated with black oxide, which is certified, good look, strength and corrosion resistant.These bolts well made and you will keep them for future needs..
【Various Sizes】Lag screws kit includes 5 different most common used sizes: Diameter are all 1/4".
Length from 1'' to 3''. Thread Type are all Coarse (standard).
Quantity: 155 pieces screws and washers. Refer to Figure 2..
【Project Center】These wood screws assortment kit are excellent for exterior household and industrial applications such as deck buildings, gazebos, trusses and other wood connections.We used these as the fasteners for steel banding trim on a custom barbwe designed and built.Turned out perfectly!.
【Choice for Heavy Duty Applications】These lag bolts are ideal used for securing wood in heavy duty applications that standard wood screws cannot support the load feature deep wood screw coarse threads for superior holding and prevent stripping in the material.
Can be applied in even severe environment. Often using with washer which distribute the pressure of the head evenly so that to prevent pull through..
【Guarantee in JROUTH】Our hex lag screws undergo rigorous inspections to ensure they....

Check Stock

3/8 x 3 Stainless Hex Head Lag Bolt Screws 25 Pack 304 18-8 Stainless Steel Coach Bolts/Large Screws for Wood with Plain Finish by Bolt Dropper

【Dimensions】Diameter: 3/8" | Length: 3" | Thread Type: Coarse (standard) | Wrench Size for Hex Head: 9/16" | Quantity: 25 pcs | Material: 18-8 (304) Stainless Steel..
【High Quality Stainless】No More Rust Stains! These Stainless Steel Lag Screws are 100% 304 Stainless Steel which is one of the highest forms of corrosion resistant steel, making it last longer than other hardware on the market today. Deep cut, coarse threads for superior holding and prevent stripping in the material..
【Bolts That You Can Depend On】Our hardware is very strong and is great for both indoor and outdoor use. The 18-8 Stainless Steel is superior to regular steel and provides excellent rust resistance in both fresh and saltwater applications..
【Lifetime Guarantee】We are so confident that our stainless steel lag screw products are the best on the market that we offer a No Hassle Lifetime Guarantee..

Check Stock

TooTaci Turnbuckle Wire Tensioner Kit,200ft Stainless Steel Cable Railing Kit,5mm Stainless Steel Wire Rope Vinyl Coated Cable,M6 Hook and Eye Turnbuckle Kit for Clothesline Kit,Hanging Kit

【Cable Railing Kit】--comes with 200ft /5mm Aircraft Cable, 4 × M6 turnbuckle hook and eye, 8× Wire Rope Thimbles,8 × M5 wire rope cable clip, 8× Lag Screw Eye,8× M5 Aluminum Copper Swages (NOTE: Ferrules Size suitable for the 5mm cable (Don't strip off the coating prior to crimping the cables ) )..
【Stainless Steel Aircraft Cable】-- vinyl coated +304 stainless steel wire rope ,7x7 Aircraft Cable, Breaking Strength 1,700 Lbs. This cable bare OD is 1/8"，coated OD is 3/16"；Not suitable for overhead lifting,Is not intended for aircraft use but is designed for industrial ,family and marine applications, suitable for clothes lines ,Tent wire , hanging outdoor lights strings, etc..
【Installation Accessories】M6 Turnbuckle for Cable Tensioner made of stainless steel ,never rust,offers good corrosion resistance and rust resistance.
crimping loop sleeve are made of aluminum, hard and sturdy, Turnbuckle perfect for tightening up metal cable, trellis wire,clothes line tensioners,rope tightener,guy wire..
【Application】-- Stainless Steel Turnbuckle and steel cable wire kits Strong and very durable for many uses, Suitable for something that requiring strong cable, such as clothes lines, traction rope, applied as sun shade ,tent hardware kit, ha....

Check Stock

kjxxkj Stainless Steel Right&Left Handed Thread Swage Lag Screws for Wood Post of 1/8 inch Cable Railing Kit,Decking Railing Hardware,DIY Baluster Kit (30 Pairs）

This cable railing kit include 30-pcs right and 30-pcs left hand thread lag screws.
Kit made of T316 –stainless steel，So it can be used indoor and outdoor；.
This deck railing hardware fit 1/8-inch OD cable of railing system，The thread screws were designed for wood post，Length of lag screw is 4 inch and length of its thread is 2 inch；.
This swage lag screws used Integrated design，So this kit will make your installation more easier、beautiful and secure, But connection of cable with lag screws need by using hydraulic crimper；.
Note：Length of cable should be 1.5 inch shorter than wood post edge distance（as shown in fig.3).
If you want To DIY a high quality railing system，Standard 1/8 in(OD) cable which was made of T316-stainless steel is recommended(Please seach B0798NLB8L to purchase the right cable).
By the design of Right&left handed thread, Of course it can be used to adjust the tightness of cable, So the turnbuckles are not needed in the railing system, And this cable railing can’t be easily unfixed and damaged by outsiders..

Check Stock

Stainless 1/4 x 1-1/4\ Hex Lag Screw (1\ to 5\ Lengths Available in Listing), 18-8 Stainless Steel, 50 Pieces (1/4 x 1-1/4\)

Tensile - 100,000 psi to 125,000 psi, Hardness - 85 Rockwell B.
1/4 x 1-1/4" Hex Head Lag Screw (also know as lag bolt).
Great corrosion resistance for outside applications.

Check Stock

Stainless 5/16 x 1-1/2\ Hex Lag Screw (1\ to 5\ Lengths Available in Listing), 18-8 Stainless Steel, 25 Pieces (5/16 x 1-1/2\)

Tensile - 100,000 psi to 125,000 psi, Hardness - 85 Rockwell B.
5/16 x 1-1/2" Hex Head Lag Screw (also known as lag bolt).
Great corrosion resistance for outside applications.

Check Stock

CONFAST 1/2\ (Inside/Screw 1/2\ - 13) Double Expansion Anchor (20 per Box)

Allows for lag screw bolts to be installed into concrete, brick and block.
Inserts into a hole by tapping with a hammer until flush.
Lag screw expands the lag shield against the walls of the hole.
Drill hole with masonry drill bit based on diameter on anchor.

Check Stock

Senmit 36 Pcs Wire Trellis Kits for Climbing Plants Vines and Green Wall for 1/8 Wire Rope Cable Non Tensioned Kit for Brick Wall Fence Panels Wood & Siding

【Amazing Design】-Designed to be unobtrusive and highly practical, the wires can be run horizontally and vertically to create a perfect trellis....
【High Quality】- Stainless Steel Hub was made of US ASTM standard 316 stainless steel, has strong corrosion resistance. Suitable for both outdoor....
【Easy Installation】-Cross the wire rope through the HUB, and then tighten the top nut with Allen key to fix them. The entire process does not....
【Size】-The height of wire trellis Hub is 1-9/16” / 40mm.The length of lag screw is 2-3/4” / 70mm..
【What’s included】-36Pcs stainless steel Hubs,36Pcs lag screws,30Pcs rubber wire caps,1Pcs Allen Key and 1 user manual.

Check Stock