Top Knurled Cup Set Screw Reviews

Graintex LP1717 Locking Plier Straight Jaw, 7-Inch

  • Jaws of The Plier Can Be Opened & Set As Needed By Turning the Knurled Screw.
  • Jaws Can Be Clamped Together By Squeezing The Handles.
  • Induction Hardened Jaws. Smooth Screw Adjustment For Easy & Rapid Setting.
  • PVC Insulation For Additional Comfort. For Home and Industrial Use.
Check Stock

Aluminum Electronic Guitar Potentiometer Knobs for 6 mm Diameter Shaft, Volume Tone Knob, Bass Knobs 25mm Dia. x 15.5mm Height 2 Pack (Blue)

  • Dress up your guitar or bass! With knurled grip texture, these flat-top knobs are an eye-catching customization. Compatible with most electric guitars or basses, lap steels and other instruments..
  • [Long lasting durability] Made of corrosion-assistant aluminium Alloy with exquisite Oxidation coating that won't fade over time. Available in Silver, Black, Red, Blue. Full aluminium alloy structure and always hold tight even when control the high torque..
  • [Size and Fitment] 0.61" tall x 0.98" diameter (15.5mm x 25mm). Fit 6mm solid shaft pots, and both fine or coarse-knurled split shaft pots..
  • [Easy to Install] Simply slide the knob onto the shaft for smooth shaft potentiometer and then use the wrench to tighten the set screw against the shaft. When installing on a split shaft pot you need to tighten the set screw in line with the split..
  • Beefy, large diameter shape allows for easy and quick adjustment of the controls..
Check Stock

Crescent 5 Piece Curved and Long Nose Locking Plier Set - CLP5SETN-08

  • Versatile curved jaw also features integral wire cutter.
  • Knurled adjusting screw turns easily by hand or with a hex key inserted into the hex key receiver on bottom of screw.
  • After initial grip is set, pliers can be tightened further by turning the adjusting screw with a hex key.
Check Stock

Selmer Bundy Leblanc Bass Clarinet Floor Peg Stand Lock Tightening Knurled Nut and Screw Pin Set

  • Bass Clarinet Floor Peg Stand Lock Tightening Screw.
  • Models: Selmer Bundy 1430 ~ Leblanc 7168 (2010-present) ~ Selmer Paris 30, 32, 33.
Check Stock

Crescent 3 Pc. Curved Jaw Locking Pliers with Wire Cutter Set - CLP3SETN-08

  • Versatile curved jaw also features integral wire cutter.
  • Knurled adjusting screw turns easily by hand or with a hex key inserted into the hex key receiver on bottom of screw.
  • After initial grip is set, pliers can be tightened further by turning the adjusting screw with a hex key.
  • Compound action for powerful non-slip locking grip.
Check Stock

Knob for Bottle Jack Valve Release Screw On Harbor Freight Hydraulic Press Made of 6061 Aluminum (3/8\)

  • hydraulic jack valve release screw knob comes in two sizes to either the jack screw with a 3/8" and 7/18" diameter valve release screw.
  • It is machined from a solid bar of 6061 aircraft quality aluminum, The knob also has a longer knurled section ,for extra grip..
  • It slides on over the release screw, turns 1/4 turn then secured in place with a set screw (included) from the end of the knob. You will need to use a 5/32 hex key (Allen wrench).
  • This particular part is designed for the Harbor Freight Hydraulic Bottle Jack used in the 6, 12 & 20 ton arbor presses but will work on any bottle jack with a 3/8 and 7/18" diameter valve release screw having a.
  • DO NOT USE WHEN LIFTING VEHICLES: ONLY TO BE USED ON HYDRAULIC PRESS APPLICATIONS!.
Check Stock

SNAP-ON TOOLS PL400B - Plier Set

  • Pliers are convertible for use on internal and external snap rings.
  • Knurled center screw with spring for easy changing and secure hold.
  • Included in this set are the PL 1620, 1621, 1622, 1623, 1624, 1624, 1626, 1627, 1628, 1629, 1630, and 1631.
Check Stock

uxcell M4x10mm Flat Knurled Head Fully Threaded Thumb Screws Bolts Fastener 15pcs

  • Thread Size: M4 x 10mm/ 0.16" x 0.4" (D*L).
  • Package Content: 15pcs x Knurled Thumb Screw.
Check Stock

18pc HD Heat Treated Dent Puller w/13lbs Slide Hammer Auto Body Shop Repair Tool

  • 【Ideal for】Designed to remove dents for the auto body, the dent puller set repairs the auto body without removing the inside panel and upholstery. This dent puller set can work on most cars and trucks..
  • 【High Performance】Sturdy steel shaft and knurled handle for a reassuring grip. Provides a strong pulling force that ensures that all your car dents pull out smoothly with minimal effort..
  • 【High Qulaity】 Slide hammer dent puller set is constructed with heat-treated steel for extra strength and durability, for all pounding and pulling operations.
  • 【Easy to Carry】 Comes with a durable plastic storage case, you can neatly collect the tools and easily bring them anywhere you like.
  • 【Package Included】1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping screw, connector hasp iron, and double-barreled connector. Attachments: 1 handle, washer, 5pc hasp iron, long tube hasp iron, cast iron hammer, right angle flat steel, hex taping adaptor, hex taping screw holder, tapping sc....
Check Stock

Fowler Inch/Metric Dial Caliper with 0-6 /150mm Range Silver 520300061

  • Accurate Measurements: Has an accuracy of ±0.001"/.02mm.
  • raised sliding surface prevents wear and defacement of graduations, and a covered rack helps prevent dirt and debris from entering the gearing and helps prevent measurement errors.
  • 4 Measuring Capabilities: This dial caliper can be used to measure inside dimensions (ID), outside dimensions (OD), depth, and step measurements.
  • Knurled Lock: Dial caliper features a knurled lock screw that holds the sliding jaw in position to hold measurement when needed.
  • a thumb-operated fine adjustment roller allows for one-handed use.
  • Colored Graduations: The large white dial has 0.001" graduations in black and 0.02mm graduations in red.
  • Set Includes: Fowler Dual Reading dial caliper, instructions, fitted case.
Check Stock

beiyoule 6PCS 1/4inch Hex Shank Aluminum Alloy Screwdriver Bits Holder Extension Bar Drill Screw Adapter Quick Release Keychain Easy Change

  • Package included: 1pcs knurled screwdriver bit holder + 2pcs adjustable length Screw Drive Guides, meet the needs of driving screws in different situations.
  • The Screw Drive Guides are not just bit tip holder, its self-retracting guide sleeve can slide to cover the long screw and helps to position the screw while driving screws. Get this to save screws from wobbling and fingers from getting damaged!.
  • The knurled Screwdriver Bit Holder material:stainless steel.
  • 2pcs Screw Drive Guides extension material: aluminum, durable, withstanding high pressure.
  • Interface come with locking mechanism and built-in magnetic, easy to lock the screwdriver bits more tightly.
  • Used for screwdriver bits, drill, batch head and other tools for the conversion, hex shank can fit power drills chuck, 1/4" impact drivers and hand-held drivers..
Check Stock

Fowler 52-058-016-0 Vernier Caliper with 0-6 /150mm Measuring Range

  • Satin Chrome Calipers: Fine quality calipers made of fully hardened stainless steel with microfine black graduations on a satin chrome finish for easy and precise reading.
  • raised sliding surfaces prevent defacement and wear of graduations.
  • Accurate Measurements: With a jaw depth of 1.6″, these fine quality vernier calipers measure accurately in inch or metric with vernier scales of 0.001"/.02mm graduations.
  • perfect measuring tool for the machine shop and household/DIY measurements.
  • 4 Measuring Capabilities: These calipers can be used to measure inside dimensions (ID), outside dimensions (OD), depth, and step measurements.
  • Knurled Lock: A knurled lock screw that holds the sliding jaw in position to hold measurement when needed.
  • a thumb-operated fine adjustment roller allows easy adjustment to a desired size.
  • Set Includes: Fowler caliper along with a fitted case and instruction manual.
Check Stock

Knew Concepts 5' Woodworker Fret Saw with Screw Tension

  • Knew Concepts revolutionized the fret saw world with the introduction of their line of US made patented fret and coping saws. These saws are perfect for jewelers, luthiers, model builders and fine woodworkers, These saws excel when performing fine scroll saw work and when removing the waste between hand cut dovetails..
  • These saws are made from 1/8" thick milled aluminum with a red anodized finish..
  • The ultra-lightweight truss-style frame weighing just 5.1 ounces is quite rigid allowing the blade to be tensioned to a full 40 pounds minimizing blade breakage and defection and improving overall cutting accuracy.
  • The set of knurled blade clamps knobs securely grip the blade and prevent slippage. Blade tension is easily adjusted via a large knurled screw tension knob. Opening is 4-3/4", depth of cut is 5" and overall length is 13".
  • Kit includes one 15 TPI #7 fret saw blade.
Check Stock