Top Jobber Drill Bits Reviews

Drill Hog USA 1/8" Cobalt M42 Drill Bits 12 Pack

  • Cobalt high speed steel ensures the bits super hard, sharp and cutting effectively with impressive performance in cutting metal, plastic, and wood etc with long tool life.
  • All drill dimensional & tolerances conform to ASME/ANSI B94.11M or USCTI - United States Cutting Tool Institute drill standards.
  • Fully ground process ensures excellent chips moving, and 135 deg chisel angle with split point provide accuracy start for quick penetration without Walking and less Logging.
  • Precision treatment makes drills durable toughness, withstands heavy duty operation, resists corrosion and lubricates the drill bits better for cutting smoothly.
  • Jobber Length Twist Drill Bits with Straight Shank for cutting metal, plastic, and wood etc.
Check Stock

Long Twist Drill, 5Pcs 2-5mm Straight Shank Twist Drill Bit Tool Extra Long Drill Bits Set High Speed Steel Stainless Steel Straight Shank Tool Installer Drill Bit for Drilling Wood

  • DURABLE QUALITY: Twist drill bits are made from high-speed steel for high hardness and durability.
  • PROFESSIONAL DIY USE: Increases cutting speed with self-centering and prevents walking, clears chips and particles faster. They are great for most drilling jobs and materials such as aluminum, wood, plastics.
  • DIFFERENT: Extra-long length drill bit reaches farther and drills deeper than a jobber or long length drill bit. Extra long cutting edge allows you using these bits to drill deep holes.
  • EASY TO USE: Straight shank twists drill has sharps twisted drill bits which make the drilling easier and more effortless, provides better stability and balance during quick operation to ensure position is intact.
  • TWIST DRILL BITS SET: This set includes 5 pieces drill bit in different sizes of the most popular drill bits. Sharp twisted drill bits will make the drilling easier and more effortless.
Check Stock

This Heart of Mine

  • Set of 21 jobber length drill bits includes inch sizes 1/16" through 3/8" in 1/64" increments.
  • High-speed steel (HSS) provides hardness for wear resistance.
  • Black oxide finish reduces bit wear while promoting chip and coolant flow on ferrous material.
  • Self-centering 135-degree split point penetrates hard material without a pilot hole and produces small chips to reduce clogging.
  • Extra thick web for increased strength and rigidity compared to standard drill bits.
Check Stock

STROTON Cobalt Drill Bit Set (1/16-1/4 Inch, 13PCS), M35 High Speed Steel Twist Drill Bits for Stainless Steel, Hard Metal, Cast Iron, Plastic and Wood

  • 【Premium True 5% Cobalt Steel with 68 HRC】- The Marked Cobalt Content of Ordinary Drill Bits May be False, but This Drill Bits Set is Made of Cobalt Ore from Our Own Mine, Which Indeed Contains 5% Cobalt. Although the Cost and Price are Slightly Higher, It Usually is able to Provide 3X Heat,Wear and Chip Resistance and 3X Tool Life..
  • 【Split Point Design and Fully Ground Process】- Compared with Other Ordinary Drill Bits, This Drill Bits Set is Particularly Suitable for Heavy Duty Work, Such as Cutting through Stainless Steel,Steel Plate,Iron Sheet, Cast Iron and Hardwood, and Drilling Out Bolts Studs and Screws..
  • 【3X Efficiency + 3X Tool Life】- This Cobalt High Speed Steel Drill Bits Set is Typically Capable of Running 3 Times Faster. Despite the Higher Price,the Cost Per Hole When Using Cobalt Drill Bit Will be the Lowest,Since It Can Produce So Many More Holes..
  • 【Sharp Drill Bit Edge】- This Kind of Drill Bits Beast Can Even Cut Hardened Metal into Long Iron Bars, While a Dull Drill Bit Can Just Slowly Wear Through Metal..
  • 【13 Pieces Jobber Length Industrial Drill Bits Includes】:1/16, 5/64, 3/32, 7/64, 1/8, 9/64, 5/32, 11/64, 3/16, 13/64, 7/32, 15/64, 1/4 [DIA 1/64 Inch Increments].
Check Stock

3/32-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/32-inch cutting diameter, 1-1/4-inch flute length, 2-1/4-inch overall length, 118 degree point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/32-inch cobalt drill bits with case.
Check Stock

1/4-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 1/4-inch cutting diameter, 2-3/4-inch flute length, 4-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 1/4-inch cobalt drill bits with case.
Check Stock

1/8-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 1/8-inch cutting diameter, 1-5/8-inch flute length, 2-3/4-inch overall length, 135 degree split point, straight shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 1/8-inch cobalt drill bits with case.
Check Stock

3/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 12

  • JOBBER LENGTH: 3/16-inch cutting diameter, 2-5/16-inch flute length, 3-1/2-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 12 pieces of 3/16-inch cobalt drill bits with case.
Check Stock

5/16-Inch Cobalt Steel M35 Jobber Length Twist Drill Bits for Hard Metal, Stainless Steel, Pack of 6

  • JOBBER LENGTH: 5/16-inch cutting diameter, 3-3/16-inch flute length, 4-1/2-inch overall length, 135 degree split point, 3-flat shank.
  • MADE FROM HIGH-SPEED STEEL AND 5% COBALT: improve much higher heat resistance because of cobalt steel's high red hardness, provide strong durable performance compared to typical hss drill bits.
  • CAN BE REPEATEDLY SHARPENED AS NEEDED: cobalt drill bit's hardness is uniform throughout the entire material, so that can be repeatedly sharpened without damaging the cutting edge allowing it to drill more than hss drill bits.
  • APPLICATION: best used for drilling in hard metal, including stainless steel.
  • INCLUDE: 6 pieces of 5/16-inch cobalt drill bits with case.
Check Stock

FTG USA 6 Piece Drill Bit Cases Designed as Storage Container for Adjustable Countersink Drill Bits, Small Containers, Plastic Boxes Used as Storage Case for Replacement Drill Bits

  • Countersink drill bit case size: 3.7 x 1.0 x 1.0 inch, can hold drill bits from 2 ¾” up to 4 ¾”, just right to fit in your tool belt, store them conveniently on your toolbox, and easy to hang on your pegboard. This container will protect and keep your drill bits safe and organized.
  • Material: made of durable plastic, waterproof, corrosion resistance, will not rust or dent. Designed to keep your countersink bits safe and improve your storage space.
  • Quantity: 6-piece drill bit tool storage containers, lightweight, dustproof, and have no sharp corners. Containers can be labeled permanently by writing directly on the plastic with a thick permanent marker, or blue painter’s tape can be used to write the content of each case on, as the tape can be removed cleanly without leaving residue.
  • Countersink drill bit container box are also suitable for replacement drill bits, jobber length drill bits, or small items storage box. This container will protect and keep your drill bits safe and organized.
  • Logo brand name printed on one side of container.
Check Stock

TICONN 99PCS Titanium Coated Drill Bit Set 135 Degree Tip HSS Drill Bits Kit with Storage Case for Steel Aluminum Copper Soft Alloy Steel Wood Plastic Size from 1/16 to 3/8

  • ... premium quality titanium coated high speed steel (HSS). These bits will stay sharper, last longer, and can drill at higher speeds than uncoated and oxide-coated drill bits. Double U shape flutes design clear chips effectively.
  • [WIDE APPLICATION] 135° point angle drill bits keep centered without a pilot hole. These jobber self-centering drill bits have the rigidity and length for most applications of corded or cordless hand drills and drill presses. Ideal for drilling mild steel, aluminum, copper, soft alloy steel, wood, and plastic.
  • [SIZE LIST] 14 different sizes including 16PCS 1/16", 16PCS 5/64", 15PCS 3/32", 10PCS 7/64", 10PCS 1/8", 8PCS 9/64", 8PCS 5/32", 3PCS 11/64", 3PCS 3/16", 2PCS 13/64", 2PCS 7/32", 2PCS 1/4", 2PCS 5/16", and 2PCS 3/8".
  • [EXTRA CENTER PUNCH] A rugged case keeps all drill bits well organized. Molded size on the case lid will help you to identify the bits you need with less effort. Included center punch will help you to mark and drill more precisely..
  • [TICONN BRAND QUALITY COMMITMENT] We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and lifetime warranty. 100% Satisfaction Guarantee for risk-free shopping!.
Check Stock

1/8 Inch Cobalt Drill Bits(10Pcs), HPHOPE M35 HSS Metal Twist Drill Bits Set, Jobber Drill Bits Length and Straight Shank, Suitable for Drilling in Hard Metal, Stainless Steel, Cast Iron

  • 【M35 COBALT HIGH SPEED STEEL】1/8" drill bits for metal made from M35 Cobalt High Speed Steel and contain 5% Cobalt, which increases wear-resistance, durability and extra longer life span, so that the drill bits last through multiple uses.
  • 【135° SPLIT POINT】135°quick-cut pilot split points are self-centering and can penetrate quickly with less pressure. Straight shank of this cobalt steel drill bit allows for firmly holding and accurate centering and makes drilling precise and faster.
  • 【FULLY GROUND PROCESS】Fully ground spiral groove design clears particles quickly, decreases friction and heat for faster drilling performance.
  • 【PROFESSIONAL & WIDELY USE】Jobber drill bits perfectly Suitable for drilling holes as Stainless Steel, Copper, Cast Iron, Galvanized Pipe, Aluminum Alloy, Wood and Other Softer Metals. Not for Glass or Ceramic Materials.
  • 【EASY USE & STORAGE】This metal twist drill bits set includes 10pcs 1/8" Cobalt Drill Bits, This drill bit fits the majority of power drill currently on the market and come with a portable plastic case for easy storage and DIY, household maintenance and repair.
Check Stock

TICONN 13 PCS Titanium Coated Drill Bit Set with Hex Shank, 135 Degree Tip High Speed Steel Drill Bits Kit with Storage Case for Steel, Aluminum, Copper, Soft Alloy Steel Size from 1/16" to 1/4"

  • [PREMIUM QUALITY] TICONN drill bits are made from premium quality titanium coated high speed steel (HSS). These bits will stay sharper, last longer, and can drill at higher speeds than uncoated and oxide-coated drill bits. Double U shape flutes design clear chips effectively.
  • [WIDE APPLICATION] 135° point angle drill bits keep centered without a pilot hole. These jobber self-centering drill bits have the rigidity and length for most applications of corded or cordless hand drills and drill presses. Ideal for drilling mild steel, aluminum, copper, soft alloy steel, wood, and plastic.
  • [SIZE LIST] 13 different sizes including 1/16", 5/64", 3/32'', 7/64", 1/8", 9/64", 5/32", 11/64", 3/16", 13/64'', 7/32", 15/64" and 1/4", one piece for each size.
  • [EXTRA CENTER PUNCH] A rugged case keeps all drill bits well organized. Molded size on the case lid will help you to identify the bits you need with less effort. Included center punch will help you to mark and drill more precisely..
  • [TICONN BRAND QUALITY COMMITMENT] We stand behind the quality of our products. If for any reason you are not satisfied with your purchase, please contact us. We provide 30-day money back and 12 months warranty. 100% Satisfaction Guarantee for risk-free shopping!.
Check Stock