Top Jabsco 37040010 Reviews

Go, Flush, Wash and Dry

Internally mounted, high speed, non-clogging, centrifugal, waste macerating pump driven by powerful 240 watt, 12 volt dc, permanent magnet motor with ball bearings and robust ceramic seal, discharges up to 5ft (1.5m) above the base of the toilet..
Raw Water Rinse pump inlet - ¾" (19mm) hose tails. Flush pump discharge - 1½" (38mm) hose tail..
Jabsco, self-priming rinse pump up to 3m (10ft), dry running, diaphragm water pump driven by 12 volt dc, permanent magnet, ball bearing motor..
One Touch 'Press and Release' switch pad mounted on wall with four flush and rinse finctions, sealed for life, with 10 -feet (3m) link cable, fitted quick connector, and heat shrink seal..

Water impeller are made of high quality neoprene,brass.High performance and durable..
Impeller replaces Jabsco 1210-0001,Johnson 09-1027B 09-1027B-1,OMC 3588256,Sierra 18-3081,SIE 18-3081,GLM 89540,Mallory 9-45703,Onan 132-0162,Perkins....
Water pump impeller diameter is 2-1/4",width is 1-1/4",shaft Diameter is 16mm..
Water pump impeller are 100% brand new and don't used or rebuild..
Water impeller have 12 months warranty and directly replacement and easy to install..

New Impeller compatible with Volvo Penta, OMC, Indmar, Yamaha, Jabsco, Johnson and many other brands. Includes O-ring and gasket depending on your....
Width 1-15/16 . Diameter 2-1/4" . 5/8 shaft 12 spline.
Compatible with: Johnson 09-812B-1, F6B-P pumps, Yanmar 119773-42600, Sierra 18-3306, Indmar S685007 ( 320HP, 325HP, 330HP, 335HP, 340HP & 350HP),....
Recommended to replace annually. Coat with dish soap before installing.
If purchasing for Volvo Penta, it only fits the pumps with LONG screws used on 2005 and newer boats. Please see picture. Please note, prior to 2005....

Internally mounted, high speed, non-clogging, centrifugal, waste macerating pump driven by powerful 240 watt, 12 volt dc, permanent magnet motor with ball bearings and robust ceramic seal, discharges up to 5ft (1.5m) above the base of the toilet..
Raw Water Rinse pump inlet - ¾" (19mm) hose tails. Flush pump discharge - 1½" (38mm) hose tail..
Jabsco, self-priming rinse pump up to 3m (10ft), dry running, diaphragm water pump driven by 12 volt dc, permanent magnet, ball bearing motor..
One Touch 'Press and Release' switch pad mounted on wall with four flush and rinse finctions, sealed for life, with 10 -feet (3m) link cable, fitted quick connector, and heat shrink seal..

New aftermarket impeller water pump with V-belt pulley..
Ready to install (impeller installed and lubed) 1 inch inlet and outlet.
Compatible with Sherwood G20, G21, G-21, PCM RA057007, Jabsco 18830-0010.
Made in South Korea. DJ Pump has a full computerized pump managment system for quality control..
DJ Pump has over 30 years experience manufacturing sea water pumps for the marine industry. Manufactured in a ISO 9001 certified facility..

23 GPM (87 LPM) at 10’ (3m) of head, 1" NPT internal ports.
Bronze impeller body, JABSCO Nitrile Impeller for fresh and salt water as well as diesel, light oils, and antifreeze transfer.
Recommended for liquid temperatures between 50° to 180°F (10° to 83°C), Replaceable wearplate.
Lip type shaft seal, 3/4 HP open drip proof (ODP) motor, overload protected, 1725 RPM, 60 Hz, single phase.
115/230 VAC, with 8 foot cord and plug (wired for 115VAC operation), 35-1/2 lbs. (approx.) (16.1 kg).

New impeller used by Volvo Penta, OMC, Johnson F5B pumps, Onan, Perkin, Yanmar, Jabsco and others.
Width 1-1/4" (31.5mm) . Diameter 2-1/4" (57mm) . 5/8 shaft 12 spline.
Includes O-rings and gaskets to fit mulitple applications. Recommended to replace annually. Install with dish soap..
If purchasing for Volvo Penta or OMC it only fits pumps with short screws prior to 2005. Please see picture..
Replaces: Volvo-Penta 825940, 860203, 3855546, 3858256, 3862281, 21213660, 876243, 3862567, 3856039 , 877400, 3862567 , 875811-2, 3856029, 21951346.....

...0, 2123664 & 3841696. Compatible with Johnson 09-812B, 09-812B-1. Compatible with Sierra 18-3306.Compatible with Yanmar 119773-42600. Compatible with Yamaha 6TA-12457-00.Compatible with Indmar S685007（320HP，325HP，330HP，335HP，340HP, 350HP）.
◆New Impeller Compatible with Volvo Penta, OMC, Indmar, Yamaha, Jabsco, Johnson, Onan, Perkin,Yanmar and many other brands.If purchasing for Volvo Penta, it only fits the pumps with LONG screws used on 2005 and newer boats. Please see picture. Please note, prior to 2005 Volvo Penta used a shorter impeller on some applications. Please check your part number or size..
◆Material and use:each water impeller rebuild kit is 100%new and made of high material Neoprene.Durable and sturdy. Silhouette: K 12 blades, Easy Installation.this outboard motor impeller is to pump the water through the cooling system of the engine, providing big power to your boat, and will be cooling greatly after installation..
◆ New Impeller Size: Width 1-15/16"(49.2mm) . Diameter 2-1/4"(57.1mm) . shaft 5/8"(16mm) ,Drive: 12 spline.
Package include：1x Impeller, 1x Gasket,1x O-rings..
◆Providing high quality and professional parts with great service.if you have any questions, please feel free to contact us by email for more informa....