Top Ir Sensors Reviews

SZBJ IR Remote Control Extender Cable,IR Repeater Kit Cable,IR Repeater Cable 4 Emitter

  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will interfere with each other and cause them.
Check Stock

TNP IR Infrared Remote Control Extender Repeater Cable (8.2 Feet) - IR Signal Receiver & IR Emitter Blaster Extension Cable Wire Cord USB Powered System Kit

  • IR remote control cable extends the signal to a video source like a Blu-ray player, DVD player, STB box, AV receiver or other A/V source with an infrared sensor so it can be controlled from your HDTV.
  • Simple installation IR Repeater cable allows you to control home theater components located behind closet cabinet doors.
  • Place the IR emitter blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • USB powered IR extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger power supply (sold separately).
  • Compatible with most A/V equipment with infrared sensors (not RF).
Check Stock

Infrared Remote Extender Cable -ir Extender for Cable Box Hidden IR Repeater System with 1 Emitters 1 Receiver (20FT)

  • Locate the IR Blaster near the source sensor to repeat the signal to the source.
  • Place the IR Receiver in a convenient location with line of sight of your hand-held remote.
  • IR Tx and Rx cables have adhesive circles on the back for mounting.
  • {UNIVERSAL COMPATIBILITY} with most A/V equipment with infrared sensors (not RF).
  • 180 degree IR Receiver angle provides plenty of leeway to get the right angle with your remote.Remote control signal receiving real-time response to fast forward without delay.
  • {USB POWERED IR }extension cable has an integrated 6 foot Y-cable to receive 5V USB power.
  • Connect to an HDTV USB port or to a USB wall charger(Tip: Devices that need remote control must be placed in a place where your remote control cannot be directly remotely controlled. Otherwise, the signal from the remote control and the remote control signal after forwarding will be sent to the set-top box at the same time. The signals are not synchronized and will interfere with each other and cause them.
Check Stock

Replacement Oxygen Sensor for MSA Altair 5

  • Patented electrochemical sensors and MSA-built button sensors.
  • Stainless steel and solid electrolyte construction virtually eliminate sensor leakage.
  • Automatically records the last 25 alarm/test events and can communicate data by connecting to MSA Link via built-in IR communication port.
  • No-miss triple alarm system includes bright flashing LEDs, piercing audible alarm, and an internal vibrating alarm.
  • Rubberized armor housing and one-button operation for maximum durability and simplicity.
Check Stock

BAFX Products - Extra IR Receiver for BAFX Products IR (Infrared) Repeater Kit / Remote Control Extender Kits

  • INTEGRATE – Our Peephole IR receiver for the BAFX Products Single Zone Repeater kit is designed to be mounted in a wall, cabinet or door so you have more sleek, streamlined look to your setup! This will require you drill a ½” hole in your wall or cabinet, slide the peephole receiver in and tighten using a 5/8” wrench..
  • FUNCTIONALITY – Our IR sensors can receive signals from 25’ away and up to a 45° angle from the remote control. Can be used with any IR remote controls. Cable is 5’ long from tip to tip with actual cable length of 4’ 10”. Works with any Make model of remote controls as long as they use Infrared technology..
  • COMPATABILITY – Compatible with the BAFX Products Single Zone IR Repeater / Remote Control Extender Kit ONLY! May not work with other brands of Infrared Repeater Kits! Does NOT work with BAFX Products Triple Zone or Wireless Kits!.
  • IMPORTANT – This IR Receiver is not designed to be plugged directly into a devices IR port. Doing so will not work and may cause undesirable operation of your device..
  • WARRANTY – 1 Year warranty against manufacturing defects provided by BAFX Products. Don’t worry if something goes wrong, BAFX Products is ready to help with friendly USA based support!.
Check Stock

WenkeDigi IR Infrared Repeater System kit, IR Repeater Extender, Max 100 Feet Efficient Receiver Range - IR Remote Control Hidden Devices -10 Feet IR Receiver Cable (Can Run 400 Feet by Your Cat5e)

  • ...e , Additional IR Emitters sold separately, One emitter one device ) . Strong Compatibly , It is compatible with almost all the IR electronic appliances like SKY STB and CISCO DVD player , SONY receivers ,Amplifier, Xbox, TV , Blu-ray player,etc with its wide frequency range 20 KHz to 60KHz ..
  • Mini Block Size , Dual Sensors Mini Bar IR receiver , One Sensor 38KHz , the Other 56KHz, with long effective remote control distance up to 100 FEET @38KHz and 23 FEET at 56KHz , High sensitivity, Real time transmission without any delay . It allows you to control your home theater with your existing IR remote controller. NOTE : NOT support RF and Bluetooth Remote Control ..
  • This IR Repeater system kit supplies with an ideal solution for those who want to conceal their A/V components equipment inside a entertainment system cabinet or closet door for a clean, stylish look. It makes it possible to control multiple IR devices while these are in a closed cupboard or in a remote location out of sight ..
  • [ PACKAGE INCLUDE] 1x IR Metal Connecting Block, 4 x Single IR Emitters (Controls 4 Devices), 1x Dual Band Mini IR Receiver, 1x Power Supply, 2x Mounting Screws and 1x Manual. Length of either Receiver cable or Transmit cable is 3 meters ..
Check Stock

Replacement Oxygen Sensor for BW Tech Gas Alert Micro 5

  • Patented electrochemical sensors and MSA-built button sensors.
  • Stainless steel and solid electrolyte construction virtually eliminate sensor leakage.
  • Automatically records the last 25 alarm/test events and can communicate data by connecting to MSA Link via built-in IR communication port.
  • No-miss triple alarm system includes bright flashing LEDs, piercing audible alarm, and an internal vibrating alarm.
  • Rubberized armor housing and one-button operation for maximum durability and simplicity.
Check Stock

Foto4easy 43mm Infared Filter,Adjustable 530nm to 750nm Infrared X-Ray IR Filter for DSLR Camera Lens

  • ... of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at whichever wavelengths you are using..
  • There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths..
  • Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device..
Check Stock

Fotga 58mm Six-in-One Adjustable Variable Infrared IR Pass X-Ray Lens Filter 530nm to 650nm 680nm 720nm 750nm

  • ...rared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating.
  • There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths.
  • Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device.
  • The creative adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at whichever wavelengths you are using. It offers you the freedom to create different wavelengths freely.
Check Stock

MSA 10071337 Single Gas Carbon Monoxide CO L50 H200 ALTAIR Detector

  • Patented electrochemical sensors and MSA-built button sensors.
  • Stainless steel and solid electrolyte construction virtually eliminate sensor leakage.
  • Automatically records the last 25 alarm/test events and can communicate data by connecting to MSA Link via built-in IR communication port.
  • No-miss triple alarm system includes bright flashing LEDs, piercing audible alarm, and an internal vibrating alarm.
  • Rubberized armor housing and one-button operation for maximum durability and simplicity.
Check Stock

Fotga 27mm Infrared Infra-red IR Pass X-Ray 720nm Lens Filter for Sony Nikon Canon Pentax Olympus Leica Samsung Fujifilm DSLR Camera

  • Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light.
  • They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating.There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light.
  • These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths.
  • This IR filter can block all visible light under 650nm, therefore let you experience some different shooting.
  • 720nm is suitable for ordinary DC/DV/DSLR cameras.
Check Stock

Fotga 40.5mm Infrared Infra-red IR Pass X-Ray 950nm Lens Filter for Sony Nikon Canon Pentax Olympus Leica Samsung Fujifilm Dslr Camera

  • Infrared filters, sometimes called IR filters or heat-absorbing filters, are designed to allow IR mid-infrared wavelengths while block visible light.
  • They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating.There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light.
  • These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths.
  • This IR filter can block all visible light under 650nm, therefore let you experience some different shooting.
  • 950nm is suitable for outdoor and strong light use.
Check Stock

FocusFoto FOTGA 67mm All-in-One Adjustable Infrared IR Pass X-Ray Lens IR Filter, Variable from 530nm to 650nm 680nm 720nm 750nm Optical Glass

  • ...ared wavelengths while block visible light. They are often used in devices with bright incandescent light bulbs (such as slide and overhead projectors) to prevent unwanted heating..
  • There are also filters which are used in solid state (CCD or CMOS) video cameras to allow IR due to the high sensitivity of many camera sensors to near-infrared light. These filters typically have a blue hue to them as they also sometimes block some of the light from the shorter visible light and UV wavelengths..
  • Digital cameras are usually equipped with IR-blocking filters to prevent unnatural-looking images. IR-transmitting (passing) filters, or removal of factory IR-blocking filters, are commonly used in infrared photography to pass infrared light and block visible and ultraviolet light. Such filters appear black to the eye, but are transparent when viewed with an IR sensitive device..
  • The creative adjustable IR filter is a compact all-in-one variable wavelengths filter that adjusts the amount of wavelengths with just the twist of your wrist. The index marks on the filter let you know exactly the amount of wavelengths at a glance. Giving you clear and precise shots at whichever wavelengths you are using. It offers you the freedom to create different wavelengths freely..
Check Stock