Top Humidity Sensor Module Reviews

509 Battery Pack for Ignite Heated Lenses

  • The Eliminator™ - Banish fog problems forever with this unique device available only from HaberVision..
  • Install it in your goggle, place the selector switch on automatic and forget about it..
  • When humidity rises inside the goggle, a sensor activates a fan and the warm moist air is evacuated..
  • When humidity returns to acceptable levels, the fan turns off..
  • A self-contained, fully automatic, humidity control module that converts most goggle brands into a fan goggle in minutes at a price you can afford..
Check Stock

DORHEA 2Pcs BME280 5V Temperature Humidity Atmospheric Barometric Pressure Sensor Module GY-BME280-5V IIC I2C Breakout Board

  • The BME280 sensor is a precision sensor, is soldered onto PCB, not only the pressure and the temperature, this sensor can measure humidity..
  • BME280 5V uses both I2C and SPI (supports 3-, 4-wire SPI) interface. Interface: I2C (up to 3.4MHz).
  • Temperature humidity module is great for all sorts of weather sensing and can even be used in both I2C and SPI. for simple easy wiring, go with I2C. If you want to connect a bunch of sensors without worrying about I2C address collisions, go with SPI..
  • The BME280 stmospheric pressure sensor is made up of a very accurate pressure sensor and an associated temperature sensor which helps calibrate the pressure readings..
  • The BME280 sensor is precision sensing solution for measuring barometric pressure with ±1 hPa absolute accuraccy, and temperature with ±1.0°C accuracy. Because pressure changes with altitude, and the pressure measurements are good, you can also use it as an altimeter with ±1 meter accuracy..
Check Stock

AITRIP 5pcs AHT10 High Precision Digital Temperature and Humidity Sensor Measurement Module I2C Communication Replace DHT11 SHT20 AM2302

  • AHT10 High Precision Digital Temperature and Humidity Sensor Measurement Module I2C Communication.
  • The sensor outputs a calibrated digital signal in standard I 2C format..
  • The AHT10 is equipped with a newly designed ASIC-specific chip,an improved MEMS semiconductor capacitive humidity sensing element and a standard on-chip temperature sensing element..
  • The AHT10,a new generation of temperature and humidity sensors,sets a new standard in size and intelligence:.
  • Its performance has been greatly improved beyond the reliability level of previous generation sensors. The first generation of temperature and humidity sensors have been improved to make them more stable in harsh environments..
  • it is embedded in a dual-row flat leadless SMD package reflow soldering with a 4 x 5mm bottom and a height of 1.6mm..
Check Stock

SHT31 Temperature & SHT31-D Humidity Sensor Module Breakout Weather for Arduino

  • The ESP8266 Weather Station IoT Starter Kit includes an ESP8266 ESP-12E Development Board, a 0.96" OLED display, a DHT11 Temperature and Humidity....
  • Developer-friendly module ESP8266 come with a USB connector and the maximum number of available pins. ESP8266 full IO mouth leads directly download....
  • The 0.96" 128x64 pixel OLED display supports I2C, wide viewing angle, low power consumption and high response speed.
  • DHT11 Temperature and Humidity Sensor with characteristics humidity measurement range: 20~90% RH, humidity measurement accuracy: +/-5% RH, temperature....
  • Four Projects in One – The ESP8266 and Wireless IoT development lets you 4 home projects, including weather station, plane spotter, world clock and....
Check Stock

AOICRIE Sensors Assortment Kit, 16 in 1 Sensor Starter Kit for Arduino Raspberry Project Super Starter Kits for R3 Mega2560 Mega328 Nano for Raspberry Pi 4b 3 2 Model B

  • For the beginner, 16 in 1 Modules Sensor Learning Package includes most projects design for those beginners and who want to know more about for Arduino, R3 Mega2560 Mega328 Nano for Raspberry Pi 3 2 Model B K62..
  • Those sensors will often being used in the beginner's project. It is included sound and obstacle avoidance sensor, obstacle avoidance sensor, temperature and humidity sensor, ultrasonic, a path tracing module and infrared human body induction sensor..
  • 16 Sensors Assortment Kit in One Starter Kit, This has 16 sensors modules and delicately selected sensors to detect temperature..
  • The highest cost performance kit for electronic hobbyist and advanced learners to expand for Raspberry Pi and for Arduino programming.Infrared sensor receiver module..
  • A great Kit for Arduino experiments or as a basis for a larger project.You will never have to worry about having the parts to complete your project with the most common modules being present in this package..
Check Stock

Honeywell YTH5320R1025 Wireless Non-Programmable FocusPRO Kit with Wireless Adapter Allows to be Used with TrueZONE Panel

  • WIRELESS FOCUSPRO THERMOSTAT: Same great features of the FocusPRO thermostat – now wireless. Installs in minutes. Displays outdoor temperature and humidity. 2 month low battery warning. Dual Fuel enabled..
  • EQUIPMENT INTERFACE MODULE (EIM): All HVAC equipment is wired to the module. Module receives communication from the wireless devices..
  • RETURN AIR SENSOR: Works with the Equipment Interface Module to maintain safe indoor temperatures if power is lost at the wireless thermostat. Maintains 62 F for heating and 82 F for cooling..
  • REDLINK WIRELESS TECHNOLOGY: Powered by RedLINK reliability. No interference with other wireless devices in the home..
Check Stock

16 in 1 Project Super Starter Kits Sensor Modules Kit for Arduino Raspberry for UNO R3 Mega2560 Mega328 Nano Raspberry Pi 3 2 Model B K62 (16 in 1)

  • THE MOST COMPLETE SMART HOME KIT--This universal kit are compatible for Arduino UNO R3 / Mega2560 / Mega328 /Nano / Raspberry Pi, it could DIY 16 projects according to your need..
  • Those sensors will often being used in the beginner's project. It is included sound and obstacle avoidance sensor, obstacle avoidance sensor, temperature and humidity sensor, ultrasonic, a path tracing module and infrared human body induction sensor..
  • This has 16 sensors modules and delicately selected sensors to detect temperature, humidity, sound, light, infrared, motion, flame, vibration, digital touch, air pressure and many other commonly-used sensors modules..
  • We eliminate many old-fashioned sensors which have low reliability and duplicate function as other sensor in the kit, the UMLIFE modules sensor kits are choosed carefully for our user..
  • With this kit, we will take you from knowing to utilizing, you are able to do more experiment, get your more idea into real action without the restriction of hardware and software. ❃❃ Any questions, you can contact us and we will give you a satisfied solution..
Check Stock

Honeywell TH6320R1004 Wireless FocusPro Thermostat

  • Wireless programmable thermostat powered by RedLink.
  • 5-1-1 Programming - Programming for the weekdays, Saturday and Sunday.
  • 5-2 Programming - Programming for weekdays and weekends.
  • Can display outdoor temperature and humidity.
  • Dual Fuel enabled - requires THM5320R1000 Equipment Interface Module and C7089R1013 Wireless Outdoor Sensor (sold separately).
  • Requires (TrueZONE system - not included): HZ432 or HZ322 TrueZONE panel.
  • Requires (Non-zoned system - not included): THM5320R1000 Equipment Interface Module.
  • 1 year battery life and 2 month low battery warning.
Check Stock

KEYESTUDIO DIY Solar Tracking Electronic Kit for Arduino ,Smart Phone Charging Module,Temperature and Humidity Sensor,BH1750 Light Sensor etc.Educational Programming Gift for Teens Adults 15+

  • 【Solar Tracking Kit for Arduino】This kit is based on Arduino. It consists of 4 ambient light sensors, 2 DOF servos, a solar panel and so on, aiming at converting light energy into electronic energy and charging power devices.It boasts a smart phone charging module, a temperature and humidity sensor, a BH1750 light sensor, a buzzer, an LCD1602 display, a push button module, an LED module and others, enriching the tutorial and making the projects more interesting..
  • 【11 Detailed Online Tutorials 】 From simple to complex, guide you step by step. You can either start from those basic ones like learning how to control a signal module or sensor, or aim at a more sophisticated one, the one integrating most of these components..
  • 【High extension】This kit preserve IIC, UART, SPI ports and Lego jacks, and extend other sensors and modules.
  • if you are experienced，you can also alter the code or connect it with other sensors or modules through the Lego parts reserved to conduct your own experiments..
  • 【Programmble Starter Kit for Kids, Teens, Adults and Professionals】KEYESTUDIO starter kit is a cost-effective open-source pr....
Check Stock

HUABAN 1PCS MQ-138 MQ138 Formaldehyde HCHO Volatile Organic Compounds VOC Gas Sensor Module with Alarm Signal Light

  • MQ-138 Formaldehyde HCHO Gas Sensor Module.
  • Response time: < 1S (3-5 minute warm-up, theory preheating time 48 hours).
  • Working temperature: -10 ~ 50 oC (nominal temperature 20 oC).
  • Humidity: 95% RH (nominal humidity 65% RH).
Check Stock

OSOYOO Omni-directinal Mecanum Wheels Robotic Car Kit for Arduino Mega2560 Metal Chassis DC Motor DIY STEM Remote Controlled Educational Mechanical DIY Coding for Teens Adult

  • 【Solar Tracking Kit for Arduino】This kit is based on Arduino. It consists of 4 ambient light sensors, 2 DOF servos, a solar panel and so on, aiming at converting light energy into electronic energy and charging power devices.It boasts a smart phone charging module, a temperature and humidity sensor, a BH1750 light sensor, a buzzer, an LCD1602 display, a push button module, an LED module and others, enriching the tutorial and making the projects more interesting..
  • 【11 Detailed Online Tutorials 】 From simple to complex, guide you step by step. You can either start from those basic ones like learning how to control a signal module or sensor, or aim at a more sophisticated one, the one integrating most of these components..
  • 【High extension】This kit preserve IIC, UART, SPI ports and Lego jacks, and extend other sensors and modules.
  • if you are experienced，you can also alter the code or connect it with other sensors or modules through the Lego parts reserved to conduct your own experiments..
  • 【Programmble Starter Kit for Kids, Teens, Adults and Professionals】KEYESTUDIO starter kit is a cost-effective open-source pr....
Check Stock

KEYESTUDIO 4WD Smart Car Robot V2.0, Programmable DIY Robotics Starter Kit for Arduino for Uno R3,17 Electronics Projects/STEM Educational/Science Coding Robot Kit for Teens Adults,15+

  • 【Solar Tracking Kit for Arduino】This kit is based on Arduino. It consists of 4 ambient light sensors, 2 DOF servos, a solar panel and so on, aiming at converting light energy into electronic energy and charging power devices.It boasts a smart phone charging module, a temperature and humidity sensor, a BH1750 light sensor, a buzzer, an LCD1602 display, a push button module, an LED module and others, enriching the tutorial and making the projects more interesting..
  • 【11 Detailed Online Tutorials 】 From simple to complex, guide you step by step. You can either start from those basic ones like learning how to control a signal module or sensor, or aim at a more sophisticated one, the one integrating most of these components..
  • 【High extension】This kit preserve IIC, UART, SPI ports and Lego jacks, and extend other sensors and modules.
  • if you are experienced，you can also alter the code or connect it with other sensors or modules through the Lego parts reserved to conduct your own experiments..
  • 【Programmble Starter Kit for Kids, Teens, Adults and Professionals】KEYESTUDIO starter kit is a cost-effective open-source pr....
Check Stock

OSOYOO WiFi Internet of Things Learning Kit for Arduino | Include ESP8266 WiFi Shiled | Smart IOT Mechanical DIY Coding for Kids Teens Adults Programming Learning How to Code

  • Innovation, keep pace with the times :Add Build on the power of Blynk to configure smart home automation and build exciting IoT project.
  • Programmable learner kit for beginners and professionals: Perfect intro to programmable electronic and IoT robotics..
  • Wifi programming and control: With ESP8266 WIFI Shield , you can remote control programming and the sensors.Learn the basics behind the Internet of Things, build your own connected devices..
  • Creative IoT Projects:This kit Includes Everything You Need To Build and Engineer Your Own smart home: WiFi Shield, Basic Board for Arduino, PIR motion sensor, Ultrasonic Sensor , Servo Motor, sound sensor, Obstacle Sensors, Buzzer Sensor Module, Photoresistor, Temperature/Humidity sensor, BMP180,Water detection sensor ,gas Sensor ,relay,Resistors package.
  • Simple ,intelligent: Control your IOT System by Android and iOS App,Sample code are straight forward. free IoT service on OSOYOO website..
Check Stock