Top Hose Splicer Fittings Reviews

JENSWILL 1 Stainless Steel Hose Barb Fitting Tee 3 way Barbed Splicer Mender Union Fitting with 3PCs Hose Clamp for Oil Water Air

Material - Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
Feature - Barbed fitting creates a tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve (3pcs hose clamp free as gift)..
Working Temperature & Pressure - Maximum working pressure of 2800 psi.
Temperatures range from -868 to 1472 ℉/-500 to 800 °C..
Widely Use - Application of our barb splicer is very wide. Hose fittings are used in systems such as beer brewing, air compressors, automatic manufacturing operations, aircraft controls, and tire installation in industries including agriculture, mining, road construction, firefighting, and aviation..

Check Stock

Brass Barb Reducer Fittings LIONMAX 1 to 3/4 Barb Hose ID Hose Barb Splicer Mender with 4 Hose Clamps for Air/Water/Fuel 2 PCS

【WITH HOSE CLAMPS】1'' to 3/4'' Hose barb reducer is suitable for connecting 1 inch ID hose to 3/4 inch ID hose. The package contains barb splicer reducer 2 PCS and 304 stainless steel hose clamp 4 PCS (size can adjust). You don't need to buy additional accessories..
【-65~250°F 150PSI】Brass barb reducer fitting has strong temperature resistance and good pressure resistance. So barb hose reducer is often used for water, fuel, oil delivery..
【SOLID BRASS MATERIAL】Barb splicer reducer is made of brass. Strong and durable, not easy to rust and corrode. Hose barb fitting has a long service life. NOTE: Brass barb reducer fitting is not suitable for potable water..
【WIDE APPLICATION】Barb hose reducer is suitable for pipe repair. Various hoses can be connected to this 1 inch to 3/4 inch ID hose barb fitting. Meet your multiple needs..
【TIGHT CONNECTION】This brass barb reducer is smooth overall without burrs. Size meets the standard. The strong barb and hose clamps make the barbed splicer reducer fitting not easy to leak during the connection process..

Check Stock

Vis Brass Hose Barb Fitting Splicer/Union/Mender 3/8 Barbed x 3/8 Barbed Fuel Line Connector Pack of 5

3/8" barb splicer for connecting two hoses with the same diameter in a straight run.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Barbed fitting for a tight seal on hoses.
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

Da by 3 pcs 3/8\(10mm) Barb Splicer Mender Hose Brass Barb Fitting with 6 pcs Stainless Steel Pipe Clamps for Water/Fuel/Air

Packaging Includes：3 PCS Two-Ways Brass Hose Mender, 6 PCS Stainless steel pipe clamps..
Size: The outer diameter of the hose barb is 3/8"(10mm), Suitable for connecting 3/8"(10mm) inner diameter hose..
Material: Hose barb splicer mender made of brass. Pipe clamps all components are all made of 304 stainless steel and will not rust..
Solid Connections:The hose barb can be solid connected to the hose（Fit hose witch inner diameter of 10mm）,The pipe clamps can create a tight seal on flexible or semi-rigid hose..
Characteristic: Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability. Stainless steel for corrosion resistance and will not rust, super sturdy..

Check Stock

Beduan Brass Hose Barb Reducer, 3/8\ to 5/16\ Barb Hose ID, Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel

Material: Brass. Connections: 3/8" x 5/16".
Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.

Check Stock

JoyTube Brass Hose Barb Fitting Metals Splicer Mender 1/4 Barb Hose Union Fuel Gas Water Air Pack of 12

Connections: 1/4” to 1/4”. Our hose barb fitting is long enough,which make sure it can insert hose but not easy to be apart. Our barb union will provide good seal when you use it to connect hose..
Application of our barb splicer is very wide, such as Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines.(Air/Water/Fuel/Boat/Gas) ..
Connects to a hose on both ends. Union coupling for connecting two hoses with the same diameter in a straight run..
Brass barb union for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
The barbed stems create better tight seal on flexible and semi-rigid hose when used with a hose clamp or crimp sleeve or ferrule (not include)..

Check Stock

Beduan Brass Hose Barb Reducer 5/16 to 1/4 Barb Hose ID Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel 4Pcs

Material: Brass. Connections: 5/16" x 1/4".
Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.

Check Stock

Quickun Brass Hose Barb Reducer 3/8 to 1/2 Barbed Reducer Fitting Reducing Splicer Mender Union Adapter for Air Water Fuel Pack of 3

Material: Brass. Connections size: 1/2" x 3/8".
Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.

Check Stock

Joywayus 3/8\ ID Hose Barb Fitting Hex Union Brass Fitting Water/Fuel/Air (Pack of 5)

【Material】Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
【Maximum Pressure】0~150Psi【Working Temperature】-40～160°F..
【Packaging Includes】5 Brass Hose Mender with barb 3/8" x 3/8"..
【Connections】Hose Splicer for connecting two hoses with the same diameter in a straight run..
【Typical Application】Temperature control circuits, pneumatic circuits, vacuum and fluid systems test apparatus, lubricant, coolant lines..

Check Stock

Beduan Brass Hose Barb Reducer 5/16 to 3/16 Barb Hose ID Reducing Barb Brabed Fitting Splicer Mender Union Air Water Fuel With 8 Hose Clamp Pack of 4

Material: Brass. Connections: 5/16" x 3/16".
Type : Barb Hose Mender/Splicer Reducer. Adapter for connecting a hose to a hose threaded connection of a different diameter.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Temperatures range from -40 to 160 F. 150 PSI maximum working pressure.

Check Stock

FIREPOWER 1444-0872 MST 220i 3-in-1 MiG, Stick and Tig Welding System, 210 Amp Max Output, 3/8\ Max Plate Thickness, 7,500 Watt Generator, 208/230 VAC, DC Output

---Fiber Optical Joint Machine Fiber Welder whole kit, Three warranty and whole life support, Ship from USA.
---9 seconds Splicing time Fusion Splicer.
---0.02dB Splicing Loss Optical Fiber Fusion Splicer.
---Core Alignment Joint Machine Fiber Welder with stripping tool.
---6 Motors Core to Core alignment fusion splicer with fiber cleaver.

Check Stock

Heater Hose Fittings 1\\/2 NPT Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383 Chrome 3\\/4 Water Pump 5\\/8 Intake Mainfold Heater Hose Connector

Fitment: Heater Hose Fittings Compatible with 1964-1979 Chevy Chevelle Camaro Nova Impala SBC 283 350 383.
Material: Intake & Water Pump Heater Hose Fittings is Made of high-quality Iron, which is durable,scratch resistant, corrosion resistant and impact resistance.
Features: Our Heater Hose Fittings are a great choice for connecting heater hoses to your water pump and intake manifold.
Package Includes: (1) 5/8" Fitting x 1.7913" Length With 1/2-14 NPT , (1) 3/4" Fittings x 2.933" Length With 1/2-14 NPT.
Please check to make sure you need 1/2" NPT Heater Hose Fittings.

Check Stock

POWERTEC 70207 4 Inch Flexible Dust Collection Hose and Fittings Kit

INCLUDES: (1) Flexible Dust Collection Hose 4” x 12” | (2) Screw End Fittings, (1) Oval Tapered Nozzle and (1) Rectangular Nozzle.
FUNCTION: A complete dust collector hose kit that possesses a versatile assortment of fittings intended to promote project flexibility and optimal airflow to your dust collection system.
HARD TO REACH: A flexible hose is designed with a 4” diameter for component compatibility, and a 12” length that can expand up to an impressive 36 inches for out-of-reach applications.
FITTINGS: Rectangular and oval tapered nozzles provide optimum adaptability with table saws, sanders, drill presses, routers, and other woodworking equipment.
QUALITY: The hose is made out of polypropylene (PP), with both pliable to rigid profiles – while the fittings are all constructed out of ABS plastic for heavy duty use and long-term durability.

Check Stock