Top Hose Barb Adapters With Ball Check Valve Reviews

Earls AT252006ERL Earls Brake Booster Check Valve - Billet Aluminum - 90 Degree

  • Fits Brake Boosters w/ 13/16” Hole for Grommet.
  • Billet Check Valve is More Attractive Than Plastic OEM Style Valve.
  • Anodized Black or Clear for Superior Corrosion Protection.
  • Choose from -6AN Male, 3/8” Barb, or 1/2” Barb for Vacuum Hose.
Check Stock

Da by Rain Barrel Spigot Faucet Kit PVC Bulkhead Fitting with Ball Valve and Garden Hose Adapter Barb 12.7mm(1/2") OD and Stainless Steel Pipe Clamps and Thread Seal Tape(kit for 12.7mm ID Hose)

  • Package: Garden spigot kit includes PVC ball valve x 1 and PVC bulkhead fitting adapter x 1 and PVC threaded connector x 1 and garden hose adapter barb(12.7mm(1/2") OD) x 1 with stainless steel pipe clamp x 2 and thread seal tape x 1.
  • High Quality: PVC, durable, non-toxic, unleaded,resists cracking and peeling, good for all seasons.Full port, fast and easy to empty your rain barrel water into a watering..
  • Specifications: 1/2 inch ball valve, 1/2"(12.7mm) OD Barb Hose Adapter(for 12mm ID Hose), Perfect connect your Rain Barrel and Hose.
  • Easy to Install: Drill a hole to install bulkhead fitting adapter, Thick durable silicone seal gasket seal the water tight and long-lasting..
  • Widely Application: Suitable for water bucket, aquariums, reef tank, irrigation, swimming pools, water parks.they are good tool that can be used in many places..
Check Stock

RIDGE WASHER High Pressure Ball Valve Kit for Power Washer Hose, 3/8” Quick Disconnect, 4500 PSI

  • High pressure ball valve kit includes a ball valve and two adapters. The adapter set converts 3/8” quick coupler plug to 3/8” male NPT thread and 3/8” quick coupler socket to 3/8” male NPT thread..
  • Working pressure is up to 4500 PSI. The max working temperature is 158 °F..
  • The steel pressure washing ball valve is superior leak resistance. Easy to connect ball valve to gun, pump and hose..
  • The ball valve is easy to turn on and off, provides good leverage under high pressure, designed for high-pressure hose..
  • If you have questions, contact us at any time. We provide a service of quick reply within 24 hours. Welcome to RIDGE WASHER to see other pressure washer accessories..
Check Stock

Habitech 2-Pack In-Line Barbed Ball Valve 13mm For 1/2 Inch Tubing .520 ID - Regulate and Shut-Off/On Water Flow

  • Important: Be sure to check the sizes and buy the right valve. This 13mm ball valve works with 1/2" tubing with 0.520 Inside Diameter (ID). If you need valves for 1/2" drip irrigation tubing, which has a larger inside diameter 0.570 to 0.620, then select the 16mm size valve..
  • Complete Flow Control: 1/2-inch inline ball valves (2 Pack) are the perfect way to regulate the water flow of your aquarium, aquatic or hydroponic systems with a simple turn of the knob. Slip your tubing onto the barbed ends of this shut-off valve coupling to control, disperse, slow, divert or completely stop water flow..
  • Fully Adjustable: Adjust the flow anywhere from full-open to full-stop. Easy to install and use with clear on and off markings. Compactly sized and smooth to turn, these quality acetal barb ball valves won't stick like PVC ball valves..
  • Versatile: Customize a secondary water zone, create individual dripline control, use as tank valves, drain valves, return valves or in any situation where fluid restriction is needed. For use with irrigation, aquarium plumbing, pump return line, saltwater applications, RV camper and trailers, pex tubing, hydroponics, and aquaponics..
  • Leak-Free Seal: These non-corrosive plastic flow valve fittings are guaranteed to pro....
Check Stock

Whatman 6721-5010 Polydisc TF PTFE In-line Filter 1.0 Micron, 13 psi Maximum Pressure, 900 Flow Rate (Pack of 10)

  • Materials of Construction: Inlet-Cover, Base, and Collar Cap: Anodized aluminum, Hose Barb Adapters: Polyethylene, Support Screen and Underdrain Disc: Electropolished type 316 stainless steel, O-Ring: Viton, Thrust Ring: PTFE and Effective Filtration Area 9.6 cm2.
  • Dimensions: Overall Length (Excluding Hose Barbs): 5.7 cm (2.2 in.), Diameter: 5.9 cm (2.3 in.), and Inlet/Outlet Connections: 3⁄8 in. FNPT.
  • hose barb adapters accept 6.4 mm (1⁄4 in.) ID tubing..
  • Maximum Operating Temperature: Limited by filter type, hose barb adapters 93 °C (199 °F), or O-ring 204 ºC (399 ºF) and Maximum Operating Pressure 14 bar (1400 kPa, 200 psi)..
  • Sterilization: Provided non-sterile. Autoclavable if desired at 121 - 123 ºC (250 - 253 ºF) at 1.0 bar (100 kPa, 15 psi) for 15 - 20 min..
  • Pall 47 mm In-line Lab Filter Holder, Lightweight, Anodized Aluminum Filter Holder Convenient design allows opening and closing without disrupting membrane. Designed for in-line liquid or gas filtration, Durable construction for stack sampling. Type Filter Holder.
Check Stock

Premium Double Gauge CO2 Regulator - Polycarbonate Bonnet

  • Commercial Dual Gauge Design with A 60 Psi and 2000 Psi Gauge Low Pressure Gauge..
  • Primary Keg Beer Regulator 5/16 barb Shutoff with Check Valve Ball Check Valve..
  • Gray Plastic Bonnet for Easy Pressure Adjustment..
  • Co2 Keg Brass Beer Double Gauge Regulator..
Check Stock

Keg Disconnect Ball Lock MFL Ball Lock Fittings Keg Connectors – Keg Coupler Stainless Ball Lock Keg Fittings 12-Piece

  • ...ose Clamps to ferment and dispense craft cocktails, soda, and other beverages from your existing keg.
  • USE YOUR KEG: Each of the ball lock keg connectors (fittings) have an approximate 2.2-inch height and 1.3-inch outside diameter (5.6cm x 3.3cm) and is compatible with ball lock Cornelius (Corny) kegs and keg couple adapters for homebrewing.
  • Hose clamps have 0.2-inch to 0.5-inch (6-12mm) diameter while the barbed swivel nuts have 5/16-inch outside diameter (OD) fitted for 1/4-inch or 3/16-inch inside diameter (ID) hoses on your 3, 5, or 10 gallon keg.
  • BUILT TO LAST: Keg ball lock quick disconnects and hose clamp wings constructed from ABS plastic that resists rust and corrosion.
  • Swivel nuts and clamps constructed from food-grade stainless steel for maximum strength and longevity.
  • INSTALL EASILY: Tighten the swivel nut connecting the flare fitting before use.
  • Ensure correct fittings are installed on input and output posts – Light gray disconnect for gas inlet and black disconnect for fluid outlet.
  • To install fittings, pull up lever on ball lock disconnect and push down on the correct ball lock (gas/fluid will flow once connected).
  • 5/16-inch barb connects your hose and screws/unscrews from fitting.
Check Stock

1/4 Viton/Kynar Non-Return Universal Barbed Check Valve Aquarium

  • Please measure prior to ordering, photo enlarged for easy viewing, scale may be distorted..
Check Stock

3/16 Viton/Kynar Non-Return Universal Barbed Check Valve Aquarium

  • Please measure prior to ordering, photo enlarged for easy viewing, scale may be distorted..
Check Stock

DERNORD Stainless Steel 1 Hose Barb x 1 NPT Male - Home Brew Pipe Fitting Pack of 2

  • Great for attaching 1" inner diameter hose, and 1" ball valve.
  • Temperature range from -30 to +150 degrees F.
  • 304 stainless steel for strength and resistance to corrosion.
Check Stock

Mota Performance A70007 Ball Milled Polished Aluminum Push-In Valve Cover Breather, Round with PCV Tube

  • Washable filter element and replaceable PCV valve and 3/8 inch hose barb fitting included.
Check Stock

Kegco KC LH-542-2 Dual Product Premium Pro Series Dual Gauge Co2 Beer Regulator, Chrome

  • Pro Series Dual Output Double Gauge Regulator pressurizes two kegs at once.
  • Adjust pressure knob by hand – no tools necessary!.
  • Output Ball Valve – 5/16″ Hose Barb x 1/4″ mnpt.
  • Integral Safety pressure relief valve releases at 45 PSI.
Check Stock

TAPRITE E-T742 CO2 Primary Beer Dual High Pressure Gauge New - CGA 320 Inlet 5/16' Barb Shutoff (Brass Body)

  • Commercial Dual Gauge Design with A 60 Psi and 2000 Psi Gauge Low Pressure Gauge..
  • Primary Keg Beer Regulator 5/16 barb Shutoff with Check Valve Ball Check Valve..
  • Gray Plastic Bonnet for Easy Pressure Adjustment..
  • Co2 Keg Brass Beer Double Gauge Regulator..
Check Stock