Top Hose Adapter Fitting Reviews

M MINGLE Pressure Washer Adapter for Gun and Power Washer, Only Compatible Karcher Hose, to M22 14mm Female Fitting

Pressure washer adapter with karcher plug, only fits karcher hose. Easy to connect and disconnect..
Pressure washer karcher hose adapter converts to M22 14mm female fitting. It connects to pressure washer or power washer gun..
Power washer adapter with Karcher hose also can connects to pressure washer hose (M22 fitting), it can extend your hose..
Karcher pressure washer accessories made of aluminum and tough plastic housing..
M MINGLE is professional on Pressure Washer Accessory and always stand behind our products, please free to contact us if any questions..

Check Stock

AR Blue Clean PW909103K Quick Connect Garden Hose Adapter 3/4 Inch

Inlet Fitting: 3/4” Garden hose connection with integrated filter.
Outlet Fitting: Aluminum 3/4” BSP threading.
Quick Connect: Snap your adapter into place in seconds with the quick connect system, simply pre-attach your adapter to your garden hose and the inlet....
Integrated Filter: The built-in filter protects your pressure washer from any unforeseen debris from your garden hose.
Swivel Inlet: Achieve a secure fasten easily with the swivel grip located on the inlet of the adapter.

Check Stock

Power Steering Box IFM To -6 AN Adapter Fittings, 65-79 GM

Fits most 1965-79 GM power steering boxes with flare fittings.
Kit contains one Steel 11/16"-18 IFM power steering box to -6 AN hose adapter fitting and one Steel 5/8"-18 IFM power steering box to -6 AN hose adapter fitting.

Check Stock

10FT 6AN Braided Fuel Line Hose -6AN Nylon Braided for 3/8\ Tube Size

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc.
Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch).
Working pressure: 500 PSI. Burst pressure: 2000 PSI.
Note: Double check the hose size before bidding. Our rubber hose should compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT..

Check Stock

Camco RhinoFlex Clear RV Sewer Hose Elbow with 4-in-1 Adapter (39736)

Securely Connects: This RV sewer elbow adapter fits securely into 4 dump station inlets: 4-inch NPT, 3.5-inch NPT, 3-inch NPT, and 3-inch slip fitting.
Clear RV Sewer Elbow: The elbow is clear, so you can see when your sewer hose has finished draining.
has a built-in gasket for an odor-tight connection.
Compatibility: The swivel bayonet fitting makes the RV sewer hose adapter compatible with any lug fitting and allows it to rotate 360 degrees, making it easy to connect.
Easy Storage: Elbow detaches from the 4-in-1 adapter and fits into a 4-inch square RV bumper.
Quality Products: Camco makes quality products for RVing, boating, camping, towing, tailgating, and grilling that help take your passion for the outdoors to the next level.

Check Stock

M MINGLE Garden Hose Adapter, 3/4 Inch Female GHT to 1/4 Inch NPT Irrigation Tubing, Brass Faucet Connector, with Extra 8 Washers

Includes 4 pieces brass faucet adapters (each has a washer inside), 4 pieces stainless steel lock cap parts and 8 pieces extra garden hose washers..
The hose adapter provide safer connection between irrigation tubing drip and garden hose. Barbed part of adapter and the stainless steel lock cap tighten the tube. The double connector ensures no leakage..
The female adapter with 3/4 inch thread fitting, fits any 3/4” male GHT (garden hose thread) watering equipment. Such as garden hose, hose splitter, inline hose filter, hose shut off valve and outdoor faucet..
The brass adapter with 1/4 Inch male NPT, connect to most 1/4 inch tubing hose. Fits PE tubing, PU tubing (outer diameter: 6mm, inner diameter: 4mm ), PVC drip irrigation tubing (OD: 7mm, ID: 4mm)..
AMZ Tool is professional on Garden Hose Accessory and always stand behind our products, please free to contact us if any questions..

Check Stock

theBlueStone -4AN -6AN -8AN -10AN Braided Fuel Line Hose 20FT -8AN Nylon Braided for 1/2' Tube Size

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc.
Inner Diameter: 11.12 mm (0.44 inch), Outer Diameter: 17.2 mm (0.68 inch).
Working pressure: 500 PSI. Burst pressure: 2000 PSI.
Note: Double check the hose size before bidding. Our rubber hose should compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT..

Check Stock

BTSHUB Fuel Pump & Vacuum Tester Gauge Leak Carburetor Pressure Diagnostics Tool Kit

...0 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
Easy-to-use: Instruction manual included.
Includes a variety of adapters ideal for most vehicles.
4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
Extra-long rubber hose and 14mm/18mm manifold adapter.
Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 male to 7/32" barbed brass fitting adapter,1x 1/8"-27 female to 3/8" male brass adapter,1x T-type 7/32" barded fitting adapter.

Check Stock

Da by Rain Barrel Spigot Faucet Kit PVC Bulkhead Fitting with Ball Valve and Garden Hose Adapter Barb 16mm 5/8 OD and Stainless Steel Pipe Clamps and Thread Seal Tape kit for 16mm ID Hose

Package: Garden spigot kit includes PVC ball valve x 1 and PVC bulkhead fitting adapter x 1 and PVC threaded connector x 1 and garden hose adapter....
High Quality: PVC, durable, non-toxic, unleaded,resists cracking and peeling, good for all seasons.Full port, fast and easy to empty your rain barrel....
Specifications: 3/4 inch ball valve, 5/8"(16mm) OD Barb Hose Adapter(for 16mm ID Hose), Perfect connect your Rain Barrel and Hose.
Easy to Install: Drill 1.5inch (37mm) hole to install bulkhead fitting adapter, 4 mm thick durable silicone seal gasket seal the water tight and....
Widely Application: Suitable for water bucket, aquariums, reef tank, irrigation, swimming pools, water parks.they are good tool that can be used in....

Check Stock

theBlueStone -4AN -6AN -8AN -10AN Braided Fuel Line Hose 10FT -6AN Nylon Braided for 3/8" Tube Size

Application for: racing fuel, pump gas, fuels with ethanol, alcohol based fuels, diesel, motor oil & coolant etc.
Inner Diameter: 8.73 mm (0.34 inch), Outer Diameter: 14.22 mm (0.56 inch).
Working pressure: 500 PSI. Burst pressure: 2000 PSI.
Note: Double check the hose size before bidding. Our rubber hose should compatible with rubber fitting adapter. The fitting adapter for PTFE hose is NOT FIT..

Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

【Package Included】25Ft 6AN nylon braided PTFE fuel injection line hose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in h....

Check Stock

Master Airbrush Brand 100 Pipette Eyedroppers for Liquid Transfer and Airbrush Paint

Master Airbrush Brand Airbrush Fitting Conversion Adapter for Badger Airbrushes.
Converts a Badger airbrushes male M5 0.5 mm thread size to standard 1/8" BSP male thread size for easy connection to 1/8" BSP air hoses.
Adapter has 1/8" BSP male threads on the outside and Badger size female threads on the inside.
The adapters 1/8" BSP hose thread size is the most common hose fitting size used for many popular airbrush brands like Master and Iwata.

Check Stock

ATPEAM Vacuum and Fuel Pump Tester Gauge Kit, Fuel Pump Pressure & Vacuum, Carburetor Intake Manifold, & Vacuum Test

Applications: This tester will test fuel pump pressure and all vacuum operated devices, 4 tests can be performed – Fuel pump pressure, fuel pump vacuum, carburetor intake manifold, and vacuum test.
Easy-to-use: Instruction manual included.
Includes a variety of adapters ideal for most vehicles.
4-inch (10.2cm) diameter pressure gauge with color-coded measurement scales, 1.2-inch (3cm) thickness with rubber side notches, easy to read and grip.
Extra-long rubber hose and 14mm/18mm manifold adapter.
Rubber hose 40 PSI (2.8 Bar) maximum working pressure.
Professional Tester Kit: Fuel Pump Pressure & VacuumTester Gauge Kit, Carburetor Test enables testing of the fuel delivery pressure to the engine to check for worn or defective parts.
Diagnose leaking valves, incorrect timing, leaky intake manifolds, and clogged mufflers. Fuel pump operating pressures up to 10 PSI (0.7 Bar), Pressure gauge 0-28 IN-Hg (0-70 cm-HG) vacuum and 0-10 PSI (0-0.7 kg/cm²) pressure.
Easy Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
Package Includes: 1x Gauge,1x 24-inch long rubber hose 40 PSI,1x brass cone adapter,2x plastic connector,1x 1/4" x18 male to 1/8" -27 female brass adapter,1x 1/8”-27 mal....

Check Stock