Top High Precision 3d Printer Nozzle Reviews

The Cheap Detective

  • ...the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing temperature and minimize the risk of printing errors. In addition, the printers kit has a layer resolution of up to 0.05 mmr, guarantees the accuracy of the print model. Dual fans provide better heat dissipation for faster and more even modeling.(Note: This mini 3D printer doesn't have the Resume Print Function, if there is a power failure it will print from the beginning .).
  • ✪【FAST HEATING AND PRINTING】: X1 printers machine are much easier to use for beginners. It comes with a unique key system that allows you to start, stop and easily control the printing process. The nozzle is heated evenly, it only takes 5 minutes, and the temperature of the nozzle can reach 180 degrees, which can meet the temperature requirements of the PLA material pressure. (Do not touch the nozzle with your h....
Check Stock

Introduction to Play Analysis

  • ...the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing temperature and minimize the risk of printing errors. In addition, the printers kit has a layer resolution of up to 0.05 mmr, guarantees the accuracy of the print model. Dual fans provide better heat dissipation for faster and more even modeling.(Note: This mini 3D printer doesn't have the Resume Print Function, if there is a power failure it will print from the beginning .).
  • ✪【FAST HEATING AND PRINTING】: X1 printers machine are much easier to use for beginners. It comes with a unique key system that allows you to start, stop and easily control the printing process. The nozzle is heated evenly, it only takes 5 minutes, and the temperature of the nozzle can reach 180 degrees, which can meet the temperature requirements of the PLA material pressure. (Do not touch the nozzle with your h....
Check Stock

Easythreed X1 FDM Mini 3D Printer for Beginners, Your First Entry-Level 3D Printer, High Printing Accuracy, New Upgraded Extruder Technology, Printing Volume 100x100X100MM…

  • ...the printer is not leveled properly, the magnetic plate may be damaged by being squeezed by the nozzle. If the nozzle is too far from the magnetic plate, the printed model will not stick to the magnetic plate. Please watch the leveling manual or video carefully.
  • ✪【HIGH PRECISION PRINT HEAD】: 3D printer's nozzle uses a professional all-metal nozzle to ensure the best printing temperature and minimize the risk of printing errors. In addition, the printers kit has a layer resolution of up to 0.05 mmr, guarantees the accuracy of the print model. Dual fans provide better heat dissipation for faster and more even modeling.(Note: This mini 3D printer doesn't have the Resume Print Function, if there is a power failure it will print from the beginning .).
  • ✪【FAST HEATING AND PRINTING】: X1 printers machine are much easier to use for beginners. It comes with a unique key system that allows you to start, stop and easily control the printing process. The nozzle is heated evenly, it only takes 5 minutes, and the temperature of the nozzle can reach 180 degrees, which can meet the temperature requirements of the PLA material pressure. (Do not touch the nozzle w....
Check Stock

Funrous 3D Printer Nozzle Cleaning Kit, Stainless Steel and Brass Compatible with Mk8 Extruder Nozzles 0.2mm, 0.4mm, 0.5mm, 0.6mm, 0.8mm, 1.0mm Cleaning Tool for Cr-10, Ender 3/ V2 Ender3 Pro (37 Pcs)

  • ...e is made of stainless steel, flexible and sturdy, easy to bend into the nozzle without breaking, and greatly dealing with the blockage of the nozzle at the hot end of the machine.
  • And the supporting tools make it more convenient for you to install and save your time.
  • High precision: the inner wall of the 3D printing nozzle is smooth and no burrs, with chamfering design to reduce the resistance of consumables, and its viscosity coefficient is small, so the diameter error of the nozzle is small, providing you with accurate and smooth extrusion.
  • The lettering on the surface allows you to clearly distinguish and use.
Check Stock

SIQUK 33 Pcs 3D Printer Nozzle Cleaning Tools Kit 30 Pcs 0.15mm 0.25mm 0.35mm 0.4mm 0.5mm Cleaning Needles 2 Pcs Tweezers and 1 Pc Cleaning Cloth

  • Fine sizes assorted - 0.15 mm, 0.25 mm, 0.35mm, 0.4 mm and 0.5 mm cleaning needles not only suitable for most of sizes nozzle but also they can use....
  • Premium material - SIQUK 3D printer nozzle cleaners are made of premium stainless steel material, sturdy, durable and flexible, easy to twist.
  • Wide compatibility - compatible with most of 3D printers extruder nozzles offered from E3D Makerbot, MK8 Makerbot RepRap.
  • Free gift - come with 2 different shape precision tweezers and 1 piece cleaning cloth, help you cleaning excess filament gear material and keep....
  • Package include - there are 30 pieces 3D printer nozzle cleaning needles in 5 different size, 2 pieces different sharpe precision tweezers and 1 piece....
Check Stock

32PCS Mk8 Nozzles 3D Printer Extruder Nozzles Hardened Steel Stainless Steel Brass High Temperature Pointed Wear Resistant Nozzle 0.4mm,Compatible with CR-10 Ender 3/ V2 Ender3 pro,Prusa i3

  • Value for money: 10 pieces stainless steel nozzles and 16 pieces brass nozzles,5 nozzle cleaning needles,1 Nozzle Spanner,possesses 0.2 mm,0.4....
  • High precision: the inner wall of the 3D printer extruder nozzle is smooth and has no burrs, its viscosity coefficient is small, and extruder nozzle....
  • Premium material: Our MK8 extruder nozzles are made of hardened stainless steel, harder than normal brass nozzles，hardened stainless steel material....
  • Good performance: this MK8 nozzle has impressive toughness and hardness, not only suitable for common 1.75 mm 3D printer filaments, but also can be....
  • Extensive Compatibility: Outer Thread M6，Input Diameter 1.75mm ,these high temperature pointed wear resistant nozzles are compatible with MK8 hotend....
Check Stock

3D Printer Part, 5PC 0.4mm Brass Extruder Nozzle Print Head+ 5PC 30mm Length Teflon Throat Tube+ 5PC Heater Blocks Hotend for Anet A8/A6 3D Printer

  • Parameter and Specifications: Input diameter 2.00mm, Output diameter 0.4 mm, out thread M6, Thread length 4mm.
  • a set of 25pcs printer nozzles，wrench and 5 pcs stainless steel needles. And the outer surface is marked with a size, So you can easily identify the specifications of the nozzle..
  • Applicability and Compatibility: Our nozzles fit for 3D Printer Makerbot CR-10, MK8 Makerbot Reprap Prusa I3, compatible with all 1.75mm PLA ABS 3D printer. Fit exactly like the original..
  • Precision Process: Made with centering CNC precision automatic lathe and one-time forming technology, make sure the input and output holes are concentric and the interior of nozzle is smooth without burrs..
  • Precise Design: Cutting with the diamond knife, make the contact surface more flat, so it reduces the risk of printhead leakage greatly and avoid nozzles clogging..
  • Due to all of above, not only reduce the resistance, avoid filament getting stuck on nozzle, but also effectively guarantee the service life of the nozzle, make out of filament more smoother..
Check Stock

Creality 3D Ender 7 3D Printer Core-XY Structure 250mm/s High-Speed Printing All Metal Dual Gear Extruder Build Volume 9.8in(L) x9.8in(W) x11.8in(H)/250x250x300mm (Ender 7 Black)

  • 1.High-speed printing, invigorating power:The Creality Ender 7 3D printer breakout in printing speed, up to 250 mm/s, 5 times faster than ordinary printers,enjoy instant high-speed printing while maintaining the same molding precision quality..
  • 2.Linear rail, higher precision:Utilizing linear guide technology to reduce movement resistance to a lower level, greatly improve printing speed and high precision positioning, and yet comes with similar stabl high-speed movement..
  • 3.Linear Rail & Core-XY Structure Offer a Higher Precision: Ender-7 utilizing linear rail technology to reduce movement resistance to a lower level, high precision positioning, and yet comes with high-speed stable movement.
  • Core-XY structure, dual motors running parallelly with coordinated operations, faster speed, and higher precision..
  • 4.Smooth discharge and stable feeding:Ender 7 customized large melt pool nozzle ensuring smooth discharge, all-metal dual gear extruder for stable feeding.Make the printer maintain a fast and smooth discharge performance in high-speed work..
  • 5.Professional after-sales and quick response: We have a professional technical team of 100+ staffs, and all product questions are directly replies by our technical team.We provide 24/7/365 after-sales service. If y....
Check Stock

SUNLU PETG 3D Printer Filament, PETG Filament 1.75mm Dimensional Accuracy +/- 0.02 mm, 1 kg Spool, PETG Blue

  • ...NLU Toughness-enhanced PLA Filament】 SUNLU premium PLA filament offer the advantage of incredible ease of 3d printing.SUNLU PLA filament,optimized print quality,high purity with low shrinkage and superb interlayer adhesion.Meet your needs for 3d printing projects on functional parts with higher toughness..
  • 【High Precision +/- 0.02mm Tolerance PLA filament】: 1.75mm PLA 3D filament(Tolerance Level : ± 0.02mm).0.25KG 3d printer filament reel,perfect roundness and very tight diameter tolerance,approximately 68m of PLA filament on each spool ease of use,minimal warping,no clogging,no bubbles.Increase your 3d printing objects delicacy..
  • 【No Clogging, no Bubbles and Good Adhesion】Better flow of SUNLU no plugging premium 1.75mm PLA filament.It has consistent diameter & roundness,less stringing and warping,strong layer adhesion.Article-free and impurity-free.No impurities,no clogged.Recommended PLA Filament Extrusion/Nozzle Temperature 200-230℃..
  • 【High Compatiblity & Vacuum Pack PLA Filament】Compatible with 99% FDM 3D printers (with heated beds) and 3D pen.Vacuum packed neatly arranged SUNLU PLA filament, provide better printing result.Environmental protection,250g PLA filament is made from starch raw materials derived from renewable plant resou....
Check Stock

eSUN Carbon Fiber Filled Nylon Filament 1.75mm, PA CF 3D Printer Filament, 1KG Spool 3D Printing Filament for 3D Printers, Natural

  • 【Heat Resistance Carbon Fiber Filled Nylon】80% Nylon Coupled with 20% Carbon Fiber, which makes it has higher rigidity and strength than normal nylon filament. Good Toughness. Wear Resistance and Tear Resistance. High Precision & Low Shrinkage. Creep Resistance and less warpage. Heat Resistance 120°C. Flame Retardance UL94-V2. Matte Printed Surface..
  • 【Clog-free & Bubble-Free & Less-tangle】Full mechanical winding and strict manual examination ensure tangling free and avoid filament breaking and snapping.eSUN Carbon Fiber Filled Nylon filament is orderly wrapped, melt well, feed smoothly and constantly without clogging the nozzle or extruder.It does not overlap or tangle,no cracking..
  • 【Wide Application】Compatible with most of FDM 3D Printers that use 1.75MM filament and suitable for making both strong and flexible industrial parts, prosthetics, medical equipment and complex costumes etc.Recommend Carbon Fiber Nylon filament extrusion / Nozzle temperature 260℃-290℃, bed 45℃-60℃.Due to its unique attribute of abrasiveness, we recommend to use a 0.6mm or larger stainless steel nozzle instead of regular soft metal nozzles..
  • 【Stable Dimensional Tolerance】3D printer filaments are produced with high precise specification and have a toler....
Check Stock

3D Printer with 10m PLA Filament Mini Printer with Mobile Printing Platform High-Precision Printing Mini Desktop 3D Printing 12 x 12 x 12cm Low-Noise Design

  • High-precision print head: The 3D printer uses a professional nozzle to ensure the best printing temperature and minimise the risk of clogging and....
  • Fast heat-up: SX1 printers are much easier to use than their 3D counterparts. It comes with a unique button system that allows you to start, stop and....
  • Quiet printing: The printer moves smoothly during printing, ensuring stable printing speed and quality and minimising noise. The working decibel is....
  • Quick assembly: 3D Printer consists of three main parts and can be assembled in a few steps. You can enjoy the fun of assembling parts by yourself and....
  • Advanced function: The 3D printer can expand the hot bed and display by itself with specific accessories. You can also upgrade the printer to a laser....
Check Stock

Wangdd22 15pc/Set 1.75mm Teflon Throat Tube+0.4mm Extruder Nozzle Print Heads+Heater Blocks Hotend for MK8 Makerbot Anet A8 3D Printer

  • Pack of 5 x 3D Printer Extruder Hotend 30mm Length 1.75mm Nozzle Inputting Tube( for MK8 Makerbot Reprap Prusa I3 3D Printer) and 5 x 3D Printer 0.4mm....
  • 0.4mm Extruder Brass Nozzle Print Head: Color - Golden.
  • Compatibility: compatible with all 1.75mm PLA ABS 3D Printer.
  • Quanlity:15pcs/lot (5 piece 1.75mm Nozzle Inputting Tube,5 piece 3D Printer 0.4mm Extruder Brass Nozzle Print Head,5 piece Heater Blocks Hotend).
Check Stock

XIFOWE MK8 Nozzles 24 pcs 3D Printer Brass Nozzles 0.2mm, 0.4mm,0.6mm, 0.8mm, 1.0mm CR-10 Nozzle with DIY Tools and Metal Storage Box for CR-8 / CR-10 / Ender 3 / Ender 3S / 5/6 and so on

  • The outer surface is marked with a size, You can easily identify the specifications of the nozzle..
  • 【Convenient】----Easy to install, easy to use, no processing, high precision, low cost DIY engraving machine, 3D printer preferred..
  • 【What you receive】----2pcs (0.2mm)Printer Nozzles. 16pcs (0.4mm)Printer Nozzles.2pcs (0.6mm)Printer Nozzles.2pcs (0.8mm)Printer Nozzles.2pcs (1.0mm)Printer Nozzles. A Ten-Grid Parts Box.A 6MM inner hexagon wrench..
  • 【Universal 】----Suitable for 3D Printer MK8 A6 A8, CR-10 / CR-10mini / CR-10S, MK8 I3, Ender 2, Ender 3 and Ender 5. Compatible with most 1.75mm 3D printer..
Check Stock