Top Handlebar Stem Spacers Reviews

BELSIZE Bike Stem Riser, Bicycle Handlebar Extender, Fit for 1-1/8“(28.6mm) Fork, Adjustable Raiser for Road Bike, MTB, BMX Bike

  • Wide Applicability: Belsize bike stem riser is suitable for most bikes with front fork tubes of 1-1/8'' (28.6mm) in diameter..
  • Adjustable Height: Coming with 4 spacers (1×5mm & 3×10mm), you can adjust the height of the stem by combining them in different ways, up to 3.46” (88mm), so that the bike perfectly meets your riding needs..
  • Comfortable Riding: If you are suffering pain in the neck or wrist even back because of your low handlebar, try this stem riser, it can relieve your pain as you can sit more upright by adding heights..
  • Premium Material: Made of aluminum alloy, lightweight with high-strength. It is also anti-rust and wear-resisting, durable to last for a long time..
  • Easy Installation: Find a 5mm wrench (package is not included), then slide the stem riser to the front fork tube, adding the original bike stem back and fits all screws, then you will have a more comfortable riding..
Check Stock

Himiway 31.8mm Bike Stem 110mm ±60 Degree Adjustable MTB Stem Aluminum Alloy Bicycle Handlebar Stem Extender Riser for Most Mountain Bike Road City Bike MTB (Only Fit 1.25"/31.8mm Handlebar)

  • 【Adjustable Angle ±60°】Adjust upward: Raise handlebar position. Make you bend less while riding, riding comfort and steering control. Adjust downward: Low down handlebar position, reduce wind resitance, ride faster.Use the adjustable stem to achieve a more comfortable riding position, the pain caused by the original setup in shoulders/arms/back had to be corrected..
  • 【Sturdy Material】Himiway bike stem adopts quality aluminum alloy, lighter weight, better toughness, no deformation, corrosion resistance, well designed and easily adjusted..
  • 【Compatibility】Fit for Handlebar diameter 31.8mm (1-1/4'').
  • Front fork stem diameter 28.6mm (1-1/8").
  • Weight: about 450g. Please confirm your bike fork diameter is 28.6mm (1-1/8") and the handlebar diameter is 31.8mm (1-1/4") before order!!!.
  • 【Easy to Install】The installation is easy because the specs were accurately represented.Just connect up the bicycle stem to original front fork stem. Four bolt bar clamp holds bar securely in position.There is a "degree of angle" indicator on the adjacent parts to allow you to set your....
Check Stock

Suncentech Bike Stem 120 Degree Adjustable Bicycle Stem 1\ / 1.25\ Handlebar Riser Adapter for Road Bike, Mountain Bike, MTB, BMX, Cycling (95, Handlebar Diameter 25.4mm/1\)

  • ★ The stem only fit for 28.6mm (1-1/8") fork diameter. Please confirm your bike handlebar diameter is 31.8mm (1-1/4") or 25.4mm (1'') before order!!!.
  • ★ The bike stem is sturdy, well designed and easily adjusted, which is preferable to removing the handlebar stem and exchanging it for one with a different angle..
  • ★ Easy to install, just connect up the original front fork. Four bolt bar clamp holds handlebar securely..
  • ★ Depending on the thickness of your handlebar, you may need to install a shim. Be sure to use glue on threads if any loosen up..
  • ★ Use the adjustable bike stem to achieve a more comfortable riding position, the pain caused by the original setup in shoulders/arms/back had to be corrected. This stem and a riser handlebar did the trick, allow you to sit more upright on bike which is better for your back..
Check Stock

700mm bike handlebars MTB carbon fiber handlebars integrated stem handlebar 28.6 Back Angle 5 degree mountain bike handlebars 80mm carbon fiber

  • 1,Material of MTB handlebar: T700 carbon fiber.
  • Excellent shockproof and maximum firmness. Give you best support during cycling. Carbon fiber compares to Aluminum Alloy: Lighter in weight. Much more beautiful in appearance. Brighter in Color. Stronger in pressure resistance. Anti-Shock. Has proper elasticity, improving your bicycle's class in minutes..
  • 3,Great design carbon integrated handlebar with stem, one piece construction. This bike handlebar could be more backwards during cycling, and more comfortable riding position. Combo for stiff control, integrated stem system reduces weight massively, suitable for for all mountain extreme riding, good value..
  • 4,This carbon moutain bike handlebar preset speedometer holder mounting screws, can be installed speedometer/stopwatch holder(Not included)! Ergonomic design, reduce air resistance, makes your ride easier. Install correctly, please follow the specified tightening torque (4NM).
  • When installing the brake, please use the ....
Check Stock

760 mm mtb riser carbon mountain bike handlebars riser bar integrated stem 1-1/8" Stem Angle -17 Degree 90mm Ultra-light integrated handlebar

  • 1,Material of MTB handlebar: T700 carbon fiber.
  • Excellent shockproof and maximum firmness. Give you best support during cycling. Carbon fiber compares to Aluminum Alloy: Lighter in weight. Much more beautiful in appearance. Brighter in Color. Stronger in pressure resistance. Anti-Shock. Has proper elasticity, improving your bicycle's class in minutes..
  • 3,Great design carbon integrated handlebar with stem, one piece construction. This bike handlebar could be more backwards during cycling, and more comfortable riding position. Combo for stiff control, integrated stem system reduces weight massively, suitable for for all mountain extreme riding, good value..
  • 4,This carbon moutain bike handlebar preset speedometer holder mounting screws, can be installed speedometer/stopwatch holder(Not included)! Ergonomic design, reduce air resistan....
Check Stock

Kbrotech Bicycle Headset Spacer Aluminium Alloy Bike Stem Headset Spacers Fork Washer Fit for 1 1/8-Inch Stem 2mm 5mm 10mm 8pieces Aluminum Alloy

  • Fit for 28.6mm front stem fork of MTB, BMX, mountain bike, road bike etc..
  • 8pieces aluminum Headset Spacers 2mmx2,5mmx3,10mmx3.Spaces Inside diameter:28.6mm.
  • Lightweight and easy to install.help to raise your handlebar..
  • Made of high-quality aluminum alloy material,CNC finished..
  • 3 different size(2mm/5mm/10mm),they could fit for your demand and meet different needs..
Check Stock

25.4 Bike Stem Adjustable 0-60 Degree Handlebar Riser Extender for Road Bike, Mountain Bike, MTB, BMX (Only Fit 1\/25.4mm Handlebar) (25.4 x 110mm)

  • ★ Please confirm your bike handlebar diameter is 25.4mm (1'') before order!!! Otherwise, the item is not suitable for your bike..
  • ★ The bike stem is sturdy, well designed and easily adjusted, which is preferable to removing the handlebar stem and exchanging it for one with a different angle..
  • ★ The installation is easy because the specs were accurately represented. There is a "degree of angle" indicator on the adjacent parts to allow you to set your angel correctly. The stem has a opening that allows you to see where the handle bar is positioned..
  • ★ This is a pretty nice riser, good adjust-ability. Depending on the thickness of your handlebar, you may need to install a shim. Be sure to use glue on threads if any loosen up..
  • ★ Use the adjustable stem to achieve a more comfortable riding position, the pain caused by the original setup in shoulders/arms/back had to be corrected. This stem and a riser handlebar did the trick, allow you to sit more upright on bike which is better for your back..
Check Stock

FOMTOR Adjustable Stem 0~90 Degree 110mm MTB Adjustable Bike Stem for 25.4mm(1\) Handlebar, Suitable for Most of Mountain Bike, Road Bike, BMX

  • Only Fit for Handlebar diameter 25.4mm (1''), front fork stem diameter 28.6mm (1-1/8"), Length: 110mm (center distance of the handlebar hole and Bolt).NOTE:This stem do not fit 31.8mm(1.25") diameter handlebar.please measure the diameter of your handelbar before you buy the stem..
  • Adjustable angle: 0°~ 90°.Maximum height extension 150mm.Help to make your bike very comfortable to ride..
  • Weight:373g. Constructed of high-strength CNC machined 6061 T6 aluminum alloy.strong and durable..
  • Suitable for Most of Mountain bike, Road bike, MTB, BMX etc..Please measure your handlebar diameter before you buy this adjustable stem..
  • Easy to install. How to stall: 1.Loosen the bottom screws use a wrench.
  • 3.Loosen the left and right screws use a wrench.
  • 4.You need to take out the black buttom first when you adjust the angles..
Check Stock

31.8 Bike Stem Adjustable 0-60 Degree Bicycle Stem Handlebar Riser Extender for Road Bike Mountain Bike MTB BMX Only Fit 1.25 /31.8mm Handlebar 31.8 x 130mm

  • ★ Please confirm your bike fork diameter is 28.6mm (1-1/8") and the handlebar diameter is 31.8mm (1-1/4") before order!!!.
  • ★ The bike stem is sturdy, well designed and easily adjusted, which is preferable to removing the handlebar stem and exchanging it for one with a different angle..
  • ★ The installation is easy because the specs were accurately represented. There is a "degree of angle" indicator on the adjacent parts to allow you to set your angel correctly. The stem has a opening that allows you to see where the handle bar is positioned..
  • ★ This is a pretty nice riser, good adjust-ability. Depending on the thickness of your handlebar, you may need to install a shim. Be sure to use glue on threads if any loosen up..
  • ★ Use the adjustable stem to achieve a more comfortable riding position, the pain caused by the original setup in shoulders/arms/back had to be corrected. This stem and a riser handlebar did the trick, allow you to sit more upright on bike which is better for your back..
Check Stock

31.8 Bike Stem Adjustable 0-60 Degree Bicycle Stem Handlebar Riser Extender for Road Bike, Mountain Bike, MTB, BMX (Only Fit 1.25\/31.8mm Handlebar) (31.8 x 110mm)

  • ★ Please confirm your bike fork diameter is 28.6mm (1-1/8") and the handlebar diameter is 31.8mm (1-1/4") before order!!!.
  • ★ The bike stem is sturdy, well designed and easily adjusted, which is preferable to removing the handlebar stem and exchanging it for one with a different angle..
  • ★ The installation is easy because the specs were accurately represented. There is a "degree of angle" indicator on the adjacent parts to allow you to set your angel correctly. The stem has a opening that allows you to see where the handle bar is positioned..
  • ★ This is a pretty nice riser, good adjust-ability. Depending on the thickness of your handlebar, you may need to install a shim. Be sure to use glue on threads if any loosen up..
  • ★ Use the adjustable stem to achieve a more comfortable riding position, the pain caused by the original setup in shoulders/arms/back had to be corrected. This stem and a riser handlebar did the trick, allow you to sit more upright on bike which is better for your back..
Check Stock

GEWAGE Bike Stem - 130 Degree Adjustable Bicycle Stem- 75mm 90mm 130mm Handlebar Stem Riser for 31.8(1-1/4\) Handlebars, Suitable for Most of Mountain Bike, Road Bike, BMX

  • 【BIKE STEM】 - This bike stems features a precision 3D shaped forged shaft interconnected with a precision broached clamp to create the strongest, lightest, most secure adjustable stem available. DIal-in the perfect height for your Handlebars!.
  • 【BIKE STEM SIZE】- Sleek aesthetics combine with performance in this Handlebar Stem Suitable for 31.8mm (1-1/4") handlebars, front fork stem diameter 28.6mm (1-1/8") ,Length: 75,95,130mm (center distance of the center of angle disk ),Weight: 320g,Please Confirm Your bike Size Before Your Purchase..
  • 【ADJUSTABLE ANGLE】- -40 angle to +90 angle adjustable according to your habits, the Adjustable Stem It can help you raise or lower the height of the handlebars to improve your position or comfort as you ride. so as to obtain a more comfortable riding experience.
  • 【EASY INSTALLATION】- The bicycle stem is easy to install, Just connect up the bike stem riser to original front fork stem. Four bolt bar clamp holds bar securely in position. Increasing the friction between the card slot and the handlebar can effectively avoid the impact of vibration and loss of control during riding..
  • 【3D FORGED ALLOY】- Bicycle handlebar stem Made of high quality 3D Forged aluminum alloy, sturdy and durable, not easy to deform....
Check Stock

Polyurethane Handle Bar Riser Bushing Compatible with Harley Davidson Touring 1983-2021, Harley Davidson Softail 2018-2021 (Type 2)

  • FITMENT : Harley Davidson Touring 1983-2021 ( Road King FLHR, Street Glide FLHX, Electra Glide FLHT, Road Glide FLTR ).
  • FITMENT : Harley Davidson Softail 2018-2021 ( Deluxe FLDE, Heritage Classic FLHC, Heritage Classic 114 FLHCS, Softail Slim FLSL, Street Bob FXBB, Fat Bob FXFB, Fat Bob 114 FXFBS, Sport Glide FLSB, Low Rider FXLR, Fat Boy FLFB, Fat Boy 114 FLFBS, Breakout 114 FXBRS, Breakout FXBR ) 3.Package Included : 2 × Handlebar Bushing , Includes steel spacers..
  • Package Included : 2 × Handlebar Bushing , Includes steel spacers..
  • Material：Steel + Polyurethane , Replace HD # 56298-03A. , An absolute must for any bike with ape hangers !.
  • Aftermarket 100% brand new , And easy to install, No modification require.
Check Stock

CYSKY Bike Stem Universal 31.8mm and 25.4mm Adjustable ± 90 Degree 145mm MTB Stem Bike Stem Riser Short Handlebar Stem for Mountain Bike Road Bike BMX City Bike Bicycle 145mm

  • Adjustable angle: -90°angle to +90° angle, can raise or lower the handlebar height to allows you to adjust to a much more comfortable upright riding position.
  • Universal 31.8mm and 25.4mm handlebar (Built-in bar shim adjustment), Front Fork Stem Diameter 28.6mm (1-1/8"), Length: 145mm, Weight 353g (0.78lb).
  • Bike handlebar stem constructed of precision 3D Forged aluminum alloy, CNC process no paint loss, easy to clean, sturdy and durable, not easy to deform and rust.
  • Suitable for most road bikes, mountain bikes, downhill bikes, track bikes, MTB, BMX, DH and so on. Perfect for modifying, DIY and upgrading your bike. Good replacement for your mountain bike.
  • Package Include: Bicycle Stem ×1, Bike Stem Shim ×1 (31.8 to 25.4 Stem Adapter), Hexagonal wrench ×2.
Check Stock