Top Gps Shield Arduino Reviews

EEEEE UNO R3 ATMEGA328P ATMEGA16U2 & Multi-Function Shield Starter kit (2 in 1) for Sensor WiFi Relay Bluetooth Module with Digital Display Switches with USB Cable Compatible with Arduino IDE

  • 1. Using this Ethernet shield, your for Arduino board can be used to connect to the Internet and can be used as a server or client..
  • 2. This Arduino Ethernet shield based on Wiznet W5100 Ethernet chip provides you with a way to easily get Arduino Online, because it is directly supported by the official Arduino Ethernet library..
  • 3. It adds a micro-SD card slot, which can be used to store files provided through the network..
  • It is compatible with Arduino Duemilanove (168 or 328), Uno and Mega (1280/2560) and can be accessed using the SD library..
  • 4. Wiznet W5100 provides a network (IP) stack that can support both TCP and UDP..
Check Stock

Botletics SIM7000 LTE CAT-M1 NB-IoT Cellular + GPS + Antenna Shield Kit for Arduino (SIM7000A)

  • Operates on LTE CAT-M1 and/or NB-IoT technology + GPS + temperature sensor.
  • Directly compatible with Arduino Uno, Mega, and Leonardo + easy connection for other logic voltages.
  • Ultra low-power mode drawing < 8uA, ideal for battery-powered IoT devices + LiPo battery charging.
  • Kit includes dual flexible LTE/GPS antenna and stacking female header kit.
  • Detailed documentation, wiki, Arduino library, and code examples on Github + community forum to ask questions.
Check Stock

Gikfun Prototype Shield DIY Kit A1 for Arduino Mega 1280 2560 R1 - R3 (Pack of 2pcs) EK1096x2

  • Prototyping Shield Diy Kits. Great for building your own designed Arduino Uno sheilds..
  • You can solder parts to the prototyping area to create your project, or use it with a small solderless breadboard to quickly test circuit ideas without having to solder..
  • It's got extra connections for all of the Arduino MEGA 1280 / 2560 R1 R2 R3 pins, and it's got space to mount through-hole and surface mount integrated circuits..
  • The Prototyping Shield makes it easy for you to design custom circuits..
  • It's a convenient way to make your custom circuit and Arduino into a single module..
Check Stock

ACEIRMC 6pcs Nano V3.0 3.0 Controller Terminal Adapter Expansion Board Nano IO Shield Simple Extension Plate for Arduino Mano AVR ATMEGA328P

  • Designed for Arduino for Nano V3.0: The item is a terminal expansion adapter, working very well for prototyping Arduino for Nano projects.
  • It lables for Arduino for Nano version 3.0, however you can still use this adapter for the older version (just have to remember that A0-A7 are in the reverse order)..
  • You can use this adapter to easily hook up for arduino for Nano to an outside world via hook up wires.
  • This item is a terminal expansion adapter, designed for Arduino Nano V3.0..
  • Nano Terminal Adapter Shield Expansion Board Compatible with Arduino Nano V3.0 AVR ATMEGA328P-AU Module.
Check Stock

2Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • ! ! ! Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact us..
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library)..
  • The mega 2560 comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files).This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. It can be used as server or client. Directly plug puzzle board, no soldering required..
  • This Ethernet Shield is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be used to store files for serving over the network..
Check Stock

6Pack 9V Battery Clip Connector Cable with Holder Box for Arduino UNO R3 Mega 2560 LED Strip Light Power Module 6F22 6LR61 mn1604 pp3 Baterries

  • Widely Used for Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, development boards, evaluation boards, breadboard, Arduino DIY, DSO 138 OscillOscope kit, XR2206 function generator and the device which need the 9V battery..
  • Easy install & Save work: This cable come with a 9V battery holder and 3 screw fixing hole on the base, convenient for fixing.
  • With this snap cable, you can saves the work of soldering a battery snap to a DC coax plug. Don't always have to take apart/open some test equipment just to change the battery inside..
  • Standard 5.5x2.1mm Center Positive Barrel Jack DC Male Plug. Cable length: Approx. 20cm (7.8 inch)..
  • Not fit for Arduino Nano, Effect pedals..
  • Any quality issues, please feel free to contact US..
Check Stock

9V Battery Holder E-outstanding 2PCS Black 6F22 9V Battery Storage Case Box with 2.1x5.5mm DC Male Plug and Wire Leads for Arduino UNO R3 Battery Clip Container

  • Made of high quality materials. Lightweight and easy to carry..
  • Designed with spring clips for easy battery installation and removal..
  • EASY TO INSTALL AND SAVE WORK: The cable comes with a 9V battery holder and 3 screw fixing holes on the base for easy fixation.
  • With this snap cable you can save yourself the work of soldering the battery snap to the DC coax plug.
  • Widely used in Arduino Uno, Arduino Due, Arduino Mega 2560, Arduino Ethernet Shield, Development Boards, Evaluation Boards, Breadboards, Arduino DIY,....
Check Stock

Screw Terminal Block Breakout Shield Module for Arduino UNO R3

  • Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
  • Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
  • Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
  • With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
  • NOTE: the item not include Arduino Uno module..
Check Stock

Comimark 1Pcs GY NEO 6MV2 GPS Module NEO-6M GY-NEO 6MV2 Board with Antenna for Arduino New

  • This is GY NEO 6MV2 GPS Module NEO-6M GY-NEO6MV2 Board with Antenna for Arduino New,The default baud rate: 9600..
  • Non-brand New Chip, but the use of the same effect.,Module with antenna, mini size with strong signal..
  • EPROM save the configuration parameter data when power down,With data backup,With LED signal lights,Compatible with various flight control....
  • Package Included:1Pcs GY NEO 6MV2 GPS Module NEO-6M GY-NEO6MV2 Board with Antenna for Arduino New(If the number of products received is incorrect,....
  • We highly appreciate all customers opinions to improve the selling, also if anything you unsatisfied, please contact us for probable best solution..
Check Stock

Arduino MKR CAN Shield [ASX00005]

  • Connect an MKR board to a Controller Area Network (CAN) Bus and read/write to/from other devices in the network..
  • Program your Arduino MKR boards to become CAN peripherals and controllers..
  • Possible applications: Smart dashboards to existing vehicles, autonomous cars, drones, and industrial machinery..
  • Use the MKR CAN shield to connect to several types of industrial grade sensors, motors and displays..
  • Works for any of the Arduino MKR boards, and can be stacked on top of other MKR Shields!.
Check Stock

SunFounder Mega 2560 R3 ATmega2560-16AU Board Bundled with R3 Board and Ethernet Shield W5100 for Arduino

  • The mega 2560 R3 Board is 100% compatible with Arduino. Powered via the USB connection or with an external power supply. The power source is selected automatically..
  • The ATmega2560-16au has 256 KB of flash memory for storing code (of which 8 KB is used for the bootloader), 8 KB of SRAM and 4 KB of EEPROM (which can be read and written with the EEPROM library). Comes preburned with a bootloader that allows you to upload new code to it without the use of an external hardware programmer. It communicates using the original STK500 protocol (reference, C header files)..
  • This version is optimized in the original version, both to ensure consistent and compatible with the original, but also easy to use..
  • R3 board compatible with Arduino. The board for Arduino use ATMEGA16U2 chip, Faster transfer rates and more memory.R3 board control using r3 ATmega328P chip. Includes new pin configuration (SCL, SDA, IOREF).Clearly print on the female header connector, more precise and easier to use the wire..
  • With this Ethernet Shield, for Arduino board can be used to connect to internet. Can be used as server or client. Directly plug puzzle board, no soldering required. It is directly compatible with Arduino official Ethernet Library. It adds a micro-SD card slot, which can be ....
Check Stock

SunFounder Ethernet Shield W5100 Compatible with Arduino UNO R3 Mega 2560 1280 A057

  • With this Ethernet Shield, Compatible with Arduino board can be used to connect to internet..
  • Directly plug puzzle board, no soldering required..
  • It is directly compatible with Arduino official Ethernet Library..
  • It adds a micro-SD card slot, which can be used to store files for serving over the network..
Check Stock