Top Potentiometer For Arduino Reviews

AITRIP 3PCS 2004 20x4 LCD Module IIC I2C Interface Adapter Blue Backlight Compatible with Arduino R3 Raspberry MEGA2560 (Blue)

  • LCD display module based on the popular HD44780 controller, works great with for Arduino / for Mega2560 board and other micro-controllers..
  • It only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back..
  • No need to buy the adapter extra, this kit contains a IIC/I2C/TWI Serial Interface Adapter, with witch you can start your project at any time..
  • With this shield, you can display whatever you want by programming the for Arduino board. Therefore, this is a perfect choice to make your project more interesting and vivid! Totally display 20 characters in one row, 4 rows can display 80 characters..
Check Stock

WayinTop 20x4 2004 LCD Display Module with IIC/I2C/TWI Serial Interface Adapter (Yellow Green/2004)

  • 【20x4 LCD Display】With this shield, you can display whatever you want by programming the for Arduino board. Therefore, this is a perfect choice to make your project more interesting and vivid! Totally display 20 characters in one row, 4 rows can display 80 characters..
  • 【IIC Interface Adapter】No need to buy the adapter extra, this kit contains a IIC/I2C/TWI Serial Interface Adapter, with witch you can start your project at any time..
  • 【Easy to Use】 Less I/O ports are occupied, only four - VCC, GND, SDA (serial data line), SCL (serial clock line). Address of the module: 0x27.
  • 【Support IIC Interface】It only takes two I/O port thus saving more for other usages. You can adjust the contrast by the potentiometer at its back. If you don’t want the back light, you can also unplug the jumper cap at the LCD back..
  • 【Widely Applications】LCD display module based on the popular controller, works great with for Arduino and other micro-controllers..
Check Stock

HiLetgo 20pcs WH148 Single-Joint Potentiometer 100K B100K Variable Resistors 15mm Shaft 3Pins 100K Ohm Potentiometer

  • Breadboard Trim Potentiometer With Knob For Arduino.
  • Body size: 0.375"x0.375"x0.19" (9.5x9.5x4.9mm).
Check Stock

ELEGOO Electronic Fun Kit Bundle with Breadboard Cable Resistor, Capacitor, LED, Potentiometer (235 Items) for Arduino, Respberry Pi

  • This kit has all the components you need to start your projects for Arduino or Raspberry Pi and other microcontrollers.
  • With a precision potentiometer, better quality, power supply module and breadboard.
Check Stock

ARCELI 5PCS PS2 Joystick Game Controller XY Dual-axis Joystick Breakout Module Compatible with Arduino

  • PS2 game joystick axis sensor module consists of using original quality metal PS2 joystick potentiometer system For the (X, Y) a 2-axis analog output and for (Z) 1 digital output channel button..
  • Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin..
  • This joystick module can be easily connect to Arduino by normal IO Expansion Shield with supplied cables..
Check Stock

MEGA 2560 Starter Kit Ultra (100% Arduino IDE Compatible) w/ Battery Holder, Sensors, Modules, Resistor kit and Components (no Supply)

  • -10 * LEDs 5mm Diffused RED -10 * LEDs 5mm Diffused GREEN -10 * LEDs 5mm Diffused YELLOW -5 * LEDs 5mm Ultrabright WHITE diffused -3 * LEDs 5mm Red / Green / Blue Diffused RGB -Shift Register (Series to Parallel IC) 74HC595 - NPN Transistor BC547 - PNP Transistor BC557 - Adjustable Knob Resistor 1kOhm (Potentiometer) - Adjustable Knob Resistor 10kOhm (Potentiometer).
  • - Resistor Pack 1/4W 1% accuracy, with 10pz of each value: 100, 220, 330, 470, 1K, 2K2, 4k7, 10K, 22K, 47K, 100K, 220K, 1M - 40-pin header 2.54 mm -40-pin header at right angle 2.54mm -5 * Capacitors for bypass tantalum 0.1uF -5 * Jumpers for header.
Check Stock

Dorhea 5 Pcs SG90 Micro Servo Motor Mini Servo SG90 9g Servo Kit Compatible with RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • Mini servo SG90 is tiny and lightweight with high output power..
  • SG90 servo motor compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • SG90 9g servo support Arduino,Futaba, JR, Sanwa and Hitec remote system..
Check Stock

Molence DIY Electronics Components Kit Assortment, Resistors 1818PCS, LED, Triode, Capacitors, Diodes, PCB, Potentiometer, Variable Resistance, Stabilivolt for Arduino UNO MEGA2560 Raspberry Pi MCU

  • This kit Includes 1818pcs of the most important and useful electronic components. Would be a great gift for a family member or friend who tinkers with electronics..
  • 820PCS 1/4W 1% Tolerance Metal Film Resistor.
  • 100% compatible for Arduino UNO, MEGA, Raspberry Pi, PLC, Microcontroller..
  • All of electronics components are well packed and assorted in a re-use storage case, convenient to carry and use..
  • The product undergoes rigorous inspection before leaving the factory. If you are not satisfied with the product, please feel free to contact us and we will provide a full refund..
Check Stock

12PCS SG90 Micro Servo Motor, Dorhea Mini Servo SG90 9g Servo Kit for RC Helicopter Airplane Car Boat Robot Arm/Hand/Walking/Servo Door Lock Control Compatible with Ardu ino

  • 100% NEW brand,high quality. Stall Torque (4.8V): 17.5oz /in (1kg/cm).
  • It is tiny and lightweight with high output power..
  • Compatible with the project like Robot Arm/ Robot hand/ control the servo with potentiometer/ multi servo control..
  • The SG90 has 3 wire interfaces in which the connections should be made as follows: Red wire-5V, Brown Wire-Ground, Yellow wire-digital pin 9..
  • Support Arduino,Futaba, JR, Sanwa and Hitec remote system..
Check Stock

EEEEE 61 Values (Pack of 1095) 1% 0.25w Resistor Book kit, 1Ω-10MΩ RoHS Compliant for Arduino, Assorted resistors Set, Assortment ohm Pack (Ω, K, M)

  • This kit Includes 3638pcs of the most important and useful SMD 1206 0805 0603 Component. Would be a great gift for a family member or friend who tinkers with electronics..
  • 1980PCS 1/4W 1% SMD Resistor. 960PCS 10pF-22uF SMD Capacitor, 300PCS SMD LED, 35PCS PCB board patch to in-line adapter board, 13PCS 3362P adjustable potentiometer, 280PCS SOT-23 Transistor, 70PCS SMA Diode..
  • 100% compatible for Arduino UNO, MEGA, Raspberry Pi, PLC, Microcontroller..
  • All of electronics components are well packed and assorted in a re-use storage case, convenient to carry and use..
  • The product undergoes rigorous inspection before leaving the factory. If you are not satisfied with the product, please feel free to contact us and we will provide a full refund..
Check Stock

OCR 1K-500K ohm Potentiometer Kit 35 Sets Knurled Shaft Linear Potentiometer with Knobs Nuts and Washers 7 Values 1K 5K 10K 20K 50K 100K 500K 3 Terminal Rotary Potentiometer

  • ✅ Top adjustment type and knurled shaft single linear 3 terminal 7 values 1K 5K 10K 20K 50K 100K 500K Ohm rotary potentiometer..
  • ✅ Linear knurled shaft potentiometer. Shaft diameter:6mm, shaft length:17mm.
  • Mounting thread diameter:6mm, base size:16*7mm.
  • ✅ Potentiometer kit offers 35pcs potentiometer knob caps. 300 degree rotary knob for easily control the potentiometer..
  • ✅ Top adjustment type and knurled shaft for easy operate in daily use time. Stander round shaft can be push on potentiometer easily..
  • ✅ Taper potentiometer used for volume control of audio sets, car radios, amplifiers, mixers, synthesizers and other appliances. For electronic....
Check Stock

GeeekPi 2-Pack I2C 1602 LCD Display Module 16X2 Character Serial Blue Backlight LCD Module for Raspberry Pi Arduino STM32 DIY Maker Project Nanopi BPI Tinker Board Electrical IoT Internet of Things

  • Use the i2c protocol to reduce the occupation of I/O ports, making it easier to add to the project, and less wiring is more beautiful..
  • Commonly used in: Internet of things, DIY project, home animation, smartbuilding, maker's DIY project..
  • Compatible with all current development boards, such as Arduino, Raspberry pi, Tinkerboard, Nano pi, Banana pi, stm32 and so on.
  • With a potentiometer used to adjust backlight (Color: Blue) and contrast.Power supply: 5v and I2C address is: 0x27 Module dimension: 80mm x 35mm x 11mm.
Check Stock

TWTADE / 3pcs Wh138 100k ohm Potentiometer Single Turn Rotary Linear Variable Potentiometer +3pcs black Aluminum alloy knob

  • Potentiometer Body Size : 24 x 10mm / 0. 9″ x 0. 39″(D * H).
  • Potentiometer Total Height : 26mm/1. 02″.
  • Rotary Knob Size : 17 x 21mm/0. 67″ x0.83″(H*Max. D).
  • Rated Power: Linear taper B: 0.5W, Other Tapers: 0.25W.
  • Rotational life of the Potentiometer: 10000 Cycles, Rotational life for joystick: 100000 Cycles Min..
  • Package Content : 3 Pcs x Switch Carbon Potentiometer + 3 Pcs x black Aluminum alloy knob.
Check Stock