Top Geared Stepper Motors Reviews

Dr.Roc Compatible Instrument Cluster Gauge Stepper Motor Repair Kit Fits X27 168 03 to 06 with 6 Stepper Motors Soldering Iron Solder Sucker Chevy Silverado GM GMC

  • The latest generation,Premium stepper motors,quiet operation and reliability,Perfectly Replace for the older and faulty XC5-168(XC5168), X15-168(X15168) ,X25-168(X25168) and X27-168(X27168,X27.168,X27 168) stepper motors that came in your vehicles,Use the tool on the upper left corner to check whether this product fits your vehicles.
  • Used for repairing guage cluster,including speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge.
  • Solve the common problems of your vehicle such as, gauges cluster dead,chatter,sticking,false/jumpy/inaccurate readings,pegged out to the left or right of the dial, ratchet up or down,sticky needle movement,erratic gauge movement etc.
  • Each gauge of your instrument cluster need one stepper motor.Since one stepper motor went out,and it will result all other stepper motors go out soon. Checking the quantity of stepper motors for your vehicle to decide to buy the 6 or 8 one..
  • The premium instrument cluster repair kit is compatible with XC5-168 (XC5168), X15-168 (X15168) ,X25-168 (X25168) and X27-168 (X27168,X27.168,X27 168) stepper motors.Regarding to the fitment,please kindly input your make, model and trim level into the Amazon Garage which is on the ....
Check Stock

X27 168 Stepper Motor Kit, Instrument Cluster Gauge Repair Kit Compatible with 03-06 GM Chevy Silverado (35 Led Light Bulbs+7 Motors+Soldering Iron+Solder Sucker+Remove Tool+Flux Rosin Core Solder)

  • COMPATIBILITY - Instrument Cluster Gauge Stepper Motor Repair Kit Compatible with 03-06 GM Chevy Silverados Tahoes Yukons. The instrument cluster repair kit perfectly replacement for the XC5-168, X15-168 ,X25-168 and X27-168 that are in your gauge cluster for 2003 2004 2005 2006 GM GMC Chevy Silverado Trailblazer. Came in your vehicles, Please check whether this X27 168 Stepper Motor Kit fits your vehicles before buying.
  • APPLIED TO - The latest stepper motor, direct replacement for the older and faulty stepper motors. Used for the repair of the speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge. These gauge cluster repair kit have been redesigned for maximum reliability and quiet operation. Insert the needle as long as you pay attention to the zero pressure can be pressed, remember not to edge pressure.
  • FIX GLITCHES - High-quality motors that meet strict international quality standards to fix common problems caused by stepper motor of your vehicles: gauges dead, chatter, sticking, false / jumpy / inaccurate readings, pegged out to the left or right of the dial, ratchet up or down, sticky needle movement, erratic gauge movement etc. Each gauge of your instrument cluster ....
Check Stock

MKS GEN L V1.0 Controller Board 3D Printer Kit Mainboard Ramps1.4 Dual Extruder Touch for 3D Printer Accessories

  • Support a Variety of Stepper Drivers -- 2560 and Ramps 1.4 are integrated in the board, which avoids the problem of complicated connectors and malfunctioning. Support a variety of stepper drivers such as A4988, DRV8825, TMC2100, available to change the stepper drivers and motors as users like..
  • Reserve External Driver Signal -- available to connect external high-current driver to drive the 57 and 86 stepper motors. Use high-quality MOSFET, better cooling effect and more stable. Use specific power chip, support 12V-24V power input, and resolve t..
  • Use CH340 Serial Port Chip -- Stable and reliable filter circuit greatly reduces interference and avoids crashes as possible in the process of printing. Use CH340 serial port chip, more easily install the drive than 16U2..
  • Support 24V Input -- The heated bed current can be reduced to 1/4 at the same system power which effectively resolves the problem that the MOSFET of heated bed heats. Run Marlin firmware, the configuration is completely same as Ramps 1.4..
  • Compatible With -- Support Ramps 1.4, 2004LCD,12864LCD, TFT28 and TFT32. X-axis, Y-axis and Z-axis with different color terminal controls the stepper motors and endstops, which is convenient to wire..
Check Stock

Worm Gear Nema23 Stepper Motor 3.5A L2.1inch Gearbox Ratio 30:1 Speed Reducer for CNC DIY Router

  • 2 phase stepper motor 2.1inch long, 1.3Nm.
  • Speed reducer motor output speed 0--20 R/min.
  • Applied to CNC Router, Engraving, Milling, Lathe. Fast Delivered 4-6 days after shipping..
Check Stock

Twotrees Nema17 Stepper Motor 4 Lead Stepper Motor Nema 17 Motor with 1m Cable 42BYGH 38MM 1.5A 17HS4401S for CNC XYZ 3D Printer

  • High Torque: Twotrees stepper motor Adopting high quality motor steel material, is provided with high torque (42Ncm(60oz.in) ), low self-inductance....
  • Low Resistance: Twotrees stepper motor can get a lower resistance value compared to motors of the same thickness and torque. This considerably....
  • Wide Application: This small stepper motors can be used in various area, such as 3D printer.
  • Excellent Service : CE certified：Each nema 17 stepper motor has undergone a rigorous quality control ex works, can carry out a 24-month quality....
  • What Do You Get: The package includes 1* 38mm Stepper Motor/1pcs 1m 4pins cable and connector (Size: 42mm X 42mm X 38mm/1.65''x1.65''x1.49'' ,NEMA 17....
Check Stock

Dr.Roc Compatible Instrument Cluster Gauge Stepper Motor Repair Kit Fits X27 168 03 to 06 with 7 Stepper Motors Soldering Iron Solder Sucker Chevy Silverado GM GMC

  • The latest generation,Premium stepper motor,quiet operation and reliability,Perfectly Replace for the older and faulty XC5-168( XC5168 ), X15-168( X15168 ) ,X25-168 ( X25168 ) and X27-168 ( X27168 , X27.168 , X27 168 ) stepper motor that came in your vehicles,Use the tool on the upper left corner to check whether this product fits your vehicles.
  • Stepper motor is used for repairing guage cluster,including speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge.
  • Solve the common problems of your vehicle such as, gauges cluster dead,chatter,sticking,false/jumpy/inaccurate readings,pegged out to the left or right of the dial, ratchet up or down,sticky needle movement,erratic gauge movement etc.
  • Each gauge of your instrument cluster need one stepper motor.Since one stepper motor went out,and it will result all other stepper motors go out soon. Checking the quantity of stepper motors for your vehicle to decide to buy the 6 or 7 one.It is easy to use for upgraded adjustable soldering iron,but you’d better to search the instructions Video on Internet first,which is very helpful..
  • The premium instrument cluster repair kit is compatible with Silverado,Suburban,Traiblazer,Tahoe,Avalanc....
Check Stock

18/4 AWG Shielded CNC Wire (50FT) — Flexible Stranded Shielded 18-Gauge 4-Conductor Cable for Stepper Motors, CNC Machines, NEMA Motors, VFD Spindles, CNC Routers, 3D Printers and more!

  • RESILIENT & FLEXIBLE: Stepper motor cable designed to bend smoothly in your CNC or 3D printer chain!.
  • SHIELDED 4 CONDUCTOR WIRE: Reduce interference for your CNC spindle motor or stepper motor driver!.
  • BEST RESULTS: Shielded wire means higher quality for your 3D Printer, CNC Machine or CNC Controller..
  • GREAT FOR All STEPPER MOTORS: Nema 17 Stepper Motor, Nema 23 Stepper Motor, Stepper Driver, & more!.
  • STEPPER MOTOR WIRE: The perfect upgrade to any CNC Kit, CNC Router Kit, or CNC Stepper Motor Kit..
Check Stock

AOICRIE 4PCS L298N Motor Drive Controller Board Module Dual H Bridge DC Stepper for Arduino

  • L298N as Main driver chip L298N, strong driving ability, strong anti-interference, low calorific value, afterflow diode protection, more stable and reliable for Arduino projects, Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • Double H bridge design, can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors, high efficient, To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • Driving DC motor Because the module is drived by double H bridge,it can drive two motors simultaneously.Input the following driving timing from IN1-IN4 then the speed and direction of the stepper motor can be controlled..
  • Easy to Use No assembly required. This L298N board comes ready to go. Just wire up motors and power, easy to use..
  • Wide Usage Great for DIY Smart Car Robot Power MEGA R3 for Mega2560 Duemilanove, if driving voltage is more than 12V, use external standard 5volt TTL outputs to switch the H-bridge circuits..
Check Stock

Dr.Roc GM Instrument Cluster Gauge Stepper Motor Repair Kit X27 168 7 Motors,10 Backlight Bulbs,1 Remove Tool,Flux Rosin Core Solder

  • The latest generation,Premium stepper motors,quiet operation and reliability,Perfectly Replace for the older and faulty XC5-168, X15-168 ,X25-168 and....
  • Used for the repair of the speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or....
  • Each gauges of your instrument cluster need one motor,since one stepper motor went out will result all the motors go out soon. check the stepper motor....
  • It is easy to use,but you’d better to search the instructions Video on Internet first,which is very helpful.
  • Dr.Roc-Most trusted auto accessories expert,millions buyers' choice, excellent customer service with 12-month warranty.
Check Stock

6Pcs L298N Motor Drive Controller Board DC Dual H-Bridge Stepper Motor Control and Drives Module for Arduino Micro:bit Smart Car Robot UNO MEGA R3 Mega2560

  • ★L298N as main driver chip makes strong driving ability and strong anti-interference,dual-channel h-bridge driver working mode creates higher working efficiency,,drive stepper dc motors to work.to avoid damage the voltage stabilizing chip, please use an external 5v logic supply when using more than 12v.
  • ★Dual-channel H-bridge driver working mode creates higher working efficiency..
  • ★To avoid damage the voltage stabilizing chip, please use an external 5V logic supply when using more than 12V driving voltage..
  • ★Use large-capacity filter capacitors and diode with freewheeling protection function, increasing reliability..
  • ★L298N as main chip. Can drive one 2-phase stepper motor, one 4-phase stepper motor or two DC motors..
Check Stock

Twotrees Stepper Motor Driver, TB6600 4A 9-42V Nema 17/23 CNC Controller Single Axes Hybrid - Upgraded Version

  • 【1】Package included: 1 x Stepper Motor Driver,1 x Stepper Motor, 1 x Wire..
  • 【2】Suitable for a wide range of stepper motors from NEMA size 17,23 and 24 (42 * 42mm to 60 * 60mm). It can be used in various types of machines, such as XYZ tables, labellers, laser cutters, engraving machines, pick-place devices and so on..
  • 【3】Motor driver: 9V-42V DC power supply, H-bridges bipolar constant phase current drive. The maximum 4.0A of the eight types of output current..
  • 【4】The largest 32 divisions of the 6 models are optional.
  • Suitable for 4 wires, 6 wires and 8 wires stepper motor..
  • 【5】Protect form: Overheated protection, overcurrent protection, undervoltage protection, prevention of inversion..
Check Stock

PWM Pulse Generator, DROK Dual Mode Adjustable Function Generator DC 3.3-30V 1-150kHZ 1-9999 Variable Pulse Width Frequency Duty Cycle Square Rectangular Wave Signal Generator Module with Case

  • PARAMETER — working voltage DC 3.3-30V.
  • DUAL MODE — the signal generator has 2 modes, PWM mode (default) & pulse mode..
  • APPLICATION — the signal generator module can be used to generate square wave rectangular wave signals for controlling DC motors or stepper motor driver.
  • for servo motors, stepper motors, electric jaws, PLC pulses replacement, etc..
  • PROTECTION — with anti-reverse protection, 5.08mm terminal wiring..
  • EASY TO OPERATE — the signal generator can control start or stop, it can also connect the external switch to control the output signal ON/OFF..
Check Stock

Zinger Instrument Cluster Gauge Stepper Motor Repair Kit X27 168 Fits 03-06 GM Chevy Silverados Tahoes Yukons(7Motors+36Led Light Bulbs+Soldering Iron+Solder Sucker+Remove Tool+Flux Rosin Core Solder)

  • The latest premium gm instrument cluster stepper motors ,perfectly replacement for the XC5-168, X15-168 ,X25-168 and X27-168 that are in your gauge cluster for 2003 2004 2005 2006 GM GMC Chevy Silverado Trailblazer.
  • Stepper motor repair kit include:7 X27 168 motors+36 backlight led bulbs+soldering iron+solder sucker+remove tool+flux rosin core solder.
  • Used for the repair of the speedometer,tachometer,oil pressure gauge,transmission temperature gauge, battery voltage gauge, water temperature gauge or fuel gauge.
  • Fix common problems caused by stepper motor of your vehicles:gauges dead,chatter,sticking,false/jumpy/inaccurate readings,pegged out to the left or right of the dial, ratchet up or down,sticky needle movement,erratic gauge movement etc.
  • Our factory is auto accessories expert, excellent customer service with 12-month warranty.
Check Stock