Top Gas Regulator Fittings Reviews

LONGADS 2 Packs 15 inch RV Propane Hoses with Gauge, Stainless Steel Braided Camper Tank Hose,Rv lp Gas Hoses Connector for Standard Two-Stage Regulator, 40Lb 250PSI, NPT /QCC1 Fittings

  • 1/4 inch ID 1/4 inch outer diameter,1/4" NPT stainless steel braided rv propane pigtail hose to 1/4" Female NPT.Please check your connector before you order it..
  • Installs quickly and easily tool-less attachment to propane tanks and regulator. Connects remote tank to high pressure regulator in order to carry gas across coach to 2-stage regulator..
  • New Convenience Design: RV Propane Hoses come with tank gauge level indicator. This gauge allows you to monitor the fuel level without.
  • necessarily removing the tank. It comes with a color coded dial which lets you see when your propane gas level is low at a glance..
  • Gulator to a QCC1 5lb to 40lb LP gas tank with Gauge can check the gas volume easily , The pigtail hose can also be used to connect to an installed 4-Port Tee as an auxiliary propane supply Solid brass fittings provide secure, airtight connection propane equipment. for BBQ, RV and camping needs or having an outdoor cooking..
Check Stock

BBQ funland 21 Inch QCC1 Hose and Regulator Kit with 1/8 NPT Male Thread Replacement Parts for Weber Propane Grills

  • 21 Inch QCC1 Hose and regulator with 1/8" NPT Male Thread fits Spirit 500 & 700, Genesis 1000-5000, and Platinum I & II gas grills.
  • Fits Weber models Spirit 500 and 700, Genesis 1000 through 5000 and Platinum I & II gas grills.
  • SAFETY &CORROSION RESISTANT- Long lasting 100% Solid Brass Construction fittings,Provides secure, airtight connection between grill or fire pit and....
  • Please Note: The end is 1/8" NPT Male Thread NOT female. Does not fit current weber grills requiring a 3/8" female flare connection.
  • Includes 21-Inch QCC1 hose, regulator. Suggest using PTFE Tape or adhesive to avoid fuel leaks.
Check Stock

DozyAnt 5 feet 0-20 PSI Adjustable High Pressure Propane Regulator with Hose for QCC1/Type1 Propane Tank Cylinder Fits for LP Gas Grill Turkey Fryers Patio Heaters and More Appliances-Safety Certified

  • Fits QCC1/Type1 LP gas propane tanks and cylinders and 3/8-inch female flare connection. Great for BBQ, camping, tailgate party, heating needs or having a patio/camping outdoor cookout..
  • Adjustable 0-20 PSI high pressure output propane regulator with 5 feet hose is a must have item for your propane burners, stove, turkey fryers, heaters, smokers. Not suitable for appliances which need low pressure regulator..
  • High quality this product itself with safety certification and excellent sealing quality is promised for your safety. This propane regulator with hose has excess flow protection for your safety and will automatically shut off..
  • 100% solid brass corrosion resistant construction fitting, and provides secure, airtight connection between propane tanks cylinders and propane gas appliances..
  • No tools needed, easy and quick attachment for easier installation.DescriptionIt features a 0-20 PSI adjustable high pressure propane regulator with 5ft hose and can be installed quickly and easily to propane tanks and cylinders..
  • The red knob can be regulated the gas flow and pressure.( Adjustable pressure range: 0-20PSI ).
  • The size of a 3/8 flare nut is 5/8 in order to accommodate for the flare seat..
Check Stock

Stanbroil LP Propane Gas Fire Pit Stainless Steel Burner Ring Installation Kit, 12-inch

  • Ring Burner Material: Durable 304# Stainless Steel, Female 1/2 Inch Gas Inlet, 92,000 BTU Max.
  • Stylish Design: New cross-bar design for better gas distribution and great look for your fire pit.
  • Package Contents: Round 12-inch Burner with 1/2 inch female Inlet includes inlet plug and wrench.
  • Shut-off Valve Kit(Polished Chrome Flange & Key).
Check Stock

Stanbroil LP Propane Gas Fire Pit Burner Ring Installation Kit, Black Steel, 12-inch

  • Ring Burner Material: Heavy duty warp-resistant steel with high temperature black paint, Female 1/2 Inch Gas Inlet, 92,000 BTU Max.
  • Stylish Design: New cross-bar design for better gas distribution and great look for your fire pit.
  • Package Contents: Round 12-inch Burner with 1/2 inch female Inlet includes inlet plug and wrench.
  • Shut-off Valve Kit(Polished Chrome Flange & Key).
Check Stock

XtremepowerUS 55148 Oxygen Acetylene Welder Tool Kit w/3 Nozzles Cutting Torch 15' Hose Gauge Regulators

  • Precision welding, cutting, brazing, soldering, hand facing and more! It'll cut up to 6" and weld or braze up to 1 / 2 " with appropriate tips.
  • Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing, hard-facing and metal heating process.
  • A complete set includes a torch handle, oxygen regulator and acetylene regulator.
  • Deluxe single stage regulators with reverse flow check valves, brass torch handle and brass valve body for maximum strength and durability.
  • Welding kit includes multiple nozzles, hoses and fittings for all purpose welding, soldering, and other applications.
Check Stock

EVIL ENERGY Fuel Filter Regulator 58 PSI Kit for LS Swap EFI Conversion

  • Function: Fuel pressure regulator filter used to create a returnless fuel supply for LS engine swaps and electronic fuel injection conversions. This bypass regulator passes excess fuel back into the tank so the pump can run freely..
  • Feature: The fuel filter regulator with 6AN adpater fittings for LS Swap delivers 58 PSI (4 BAR) to your fuel rail and returns unused gas to the tank, and build-in a 10 micron fuel filter ensures clean fuel is delivered to your engine, thus to protect the normal operation of the engine, reduce wear, avoid blocking, improve the purpose of engine life..
  • Compatible with: The fuel filter pressure regulator compatible with Chevrolet 1999-2014 V8 5.3L/325 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 4.8L/294 Chevy small block Gen III/IV (LS-based engines), Chevrolet 1999-2014 V8 6.0L/364 Chevy small block Gen III/IV (LS-based engines). Please you check the part is your need before purchase..
  • Installation: fuel filter regulator kit for LS Swap EFI Conversion can be installed anywhere between the tank and the engine, although it is usually installed in the engine compartm....
Check Stock

Victor 0384-2101 Journeyman Edge 2.0 540/510, 90° Plus Outfit

  • Includes 2 barbed hose splicers and 4 hose ferrules.
  • Common USA torch inlet and regulator outlet connections.
  • Low pressure, less than 200 psig gas service.
  • Repair your 1/4-Inch hose in the field, (ferrule crimper not included).
Check Stock

La torche / Marie nizet

  • Flashback arrestor set has internal check valves for both oxygen and acetylene.
  • Standard -InchB-Inch fittings for 9/16 -18 threads,B size..
  • NOTE: The acetylene arrestor in this set can also be used for Propane or Mapp gas..
Check Stock

Marey GA5PORT Portable Propane Gas Tankless Water Heater, Small, White

  • Naturally vented outdoors: you don't need to buy a extra venting.
  • Serves to a variety of applications, since washing your car, windows cleaning, wash your horse or your dog and take a hot shower.
  • Perfect for campsites, cabins, remote areas or just around the house. BTU/h - 35000 BTU/h. Fuel Type - LPG(liquid propane gas). pipe fittings - 1/2 inch NPT, incoming/outgoing water and gas.
  • Provide endless hot water on demand only as needed.
  • Includes a gas hose with csa approved regulator for attaching to a standard liquid propane tank.
  • Portable water heater by Marey has a compact design and light weight saves space and is easy to carry anywhere.
Check Stock

Industrial Argon Regulator/Flowmeter Gauges for MIG and TIG Welders + 5 Feet Hose - SÜA

  • Argon Regulator for Shield Gas in TIG and MIG Welding.
  • Gas Service: Argon, Argon/CO2 Mixtures, Helium - Inlet Connection: CGA-580.
  • Three Outlet Connection Options: 9/16" Male, 5/8" Female and Hose Barb.
  • Inlet Gauge: 0-400 psi - Dual Scale Outlet Gauge: Argon 0-30 CFH and CO2 0-20 CFH.
  • Includes 5 Feet Argon Hose with 5/8"-18 Male Fittings in Both Ends. Fits flowmeter and all major welder brands. Designed for MIG and TIG welding.
Check Stock

OCEAN REEF Unisex Space Extender Integrated Full Face Diving Mask Black/Black Medium/Large

  • INTEGRATED REGULATOR - 2'nd Stage Regulator is an adjustable design for ease of breathing at all depths.
  • it is equipped with a dive/pre-dive switch for added protection against unwanted free flow and is Nitrox compatible up to 40% Oxygen out-of-the-box..
  • ADVANCED DIVE MASK - The Extender comes as standard with a surface air valve fitted so you don't waste gas on the surface.
  • letting you breathe through a valve on the side of the mask you can leave the mask on before and after the dive to save gas..
  • DURABILITY AND SCRATCH RESISTANCE - Full face scuba mask has a transparent polycarbonate visor, both sides of which are coated in siloxane resin for improved scratch and chemical resistance..
  • EXTENDER EARPHONE SUPPORTS - These are the natural fittings for the earphones (MHA-2) of the GSM G-Power SL communication unit, once complete, this systems let’s you enjoy a double speaker system, with volume control and extra range..
  • MOUNT YOUR GOPRO - The extender kit frame around the diving mask has a flat, trapezoid shape, specifically made for sport camera stickers, or to drill holes and fix lights to it..
Check Stock

CGA580 Argon CO2 Regulators Argon Gauges Gas Welding Regulator Compatible with Mig Tig Miller Lincoln Weld 0-4500PSI / 0-10BAR - CO2 Argon Regulator with 6.6Ft Hose

  • Universal Gas Welding Regulator - This Gas Pressure Regulator/Flowmeter Can Be Used with Argon, Helium and CO2 Gas Tanks (CGA-580 Inlet). Argon gauge 0 to 4500 PSI, argon gauge regulator provides accurate regulation of gas flow. This Gas Hose Is Ideal For Fitting Mig And Tig Welding. Ideal for commercial, industrial and laboratory applications.
  • 100% Brand New Argon Regulator with Hose - The CO2 regulator body is made of brass, Single-stage regulator, built-in pressure overload automatic degassing device. Large T-shaped adjustment handle, easy to adjust the pressure by hand. The flow tube is made of polycarbonate.
  • Accurate Argon Regulator with Pressure Gauge - CGA580 fitting (15/16" Male Thread), 9/16" male thread, 5/8" female thread. Argon gas meter measuring range: 0 to 4500 PSI. Argon CO2 Regulators Gauges Gas Welding Regulator With 6.6Ft Gas Hose. 6.6Ft Hose Quick Connect Fitting enable your tanks at a safe distance from your welding projects.
  • Reliable CGA580 Argon CO2 Regulator - The Argon CO2 flowmeter regulator has a plastic adjustment knob that allows for smooth "light touch" flow settings and has an internal safety relief design, Provides a safe environment for car driving. CO2 regulator with 2" dual gauges that will be easy to read.
Check Stock