Top Gas Check Valve Reviews

EZ-FLO 20423LF Swing Check Valve, 3/4" IPS, Brass

  • The swing check valve is equipped with a 3/4 inch female iron pipe (FIP) threaded connection for an easy installation.
  • Constructed of a highly-durable brass for strength and durable for every use.
  • The straight pattern check valve has a working pressure of 125 PSI – 200 Water, Oil, Gas (WOG) for product safety.
  • The EZ-FLO swing check valve is certified to be lead-free for potable water installations.
Check Stock

Eastman Swing Check Valve 2 Inch IPS Brass Plumbing Fitting 20431LF

  • ✅QUALITY- Made of a highly-durable brass for strength and durable for every use. The straight pattern check valve has a working pressure of 125 PSI - 200 Water, Oil, and Gas (WOG) for product safety..
  • ✅FUNCTIONALITY- The valve is designed to keep fluids from backing up into the water supply such as backflow from wells and boiler systems..
  • ✅MEASUREMENT- The swing check valve is equipped with a 2 inch female iron pipe (FIP) threaded connection..
  • ✅SAFETY- The EZ-FLO swing check valve is lead free and suitable for all potable water supply installations..
  • ✅INSTALLATION- Must be installed horizontally. For use in residential and commercial settings..
Check Stock

10 pieces Transparent Silicone Duckbill Valve One-way Check Valve 15 x 7.3 x 19.5mm for Liquid and Gas Backflow Prevent

  • 100% full rubber or silicone structure, can meet a variety of high temperature. No clogging good sealing effective prevention of liquid gas backflow.
  • All-rubber structure corrosion resistance long service life good effect And provide a tight seal prevent backflow maintenance-free..
  • When installing the check valve special attention should be paid to the direction of flow of the medium and the normal flow direction of the medium should be consistent with the direction of the arrow indicated on the valve body otherwise the normal flow of the medium will be cut off. Opening the pressure is small generally open 1-5KPA pressure liquid or gas it can open, good sealing Easy to install.
  • Silicone Duckbill Valve Made from Environmentally friendly silicone material.
  • Outer diameter 15, inner diameter 7.3, height 19.5 MM.
Check Stock

Hitachi Pilot Unloader Check valve Combo for Gas Compressors 885426 EC2510E

  • Replaces Hitachi 885426 for EC2510E Gas Compressors 110 - 140 PSI Made in USA.
  • Check valve /Unloader valve / Pilot valve all in one - (continuous run unloader) for gas & electric powered air compressors.
  • 110 - 140 PSI factory setting. pressure can be adjusted 30-40 psi up or down.
  • 1/2" Metric Flare TOP Inlet x 3/8" Male Pipe Thread outlet to air tank.
  • 30 scfm Rating ! Pressure can be adjusted 30-40 PSI Higher or Lower. If pressure adjustment is needed, Please see Pic attachment for adjustment instructions..
Check Stock

Fuel Petcock Valve Switch Fit for Harley Sportster Big Twin and Custom Tanks 1975-2006 Replace 62168-81 62167-81 62163-75 011401 Gas Tank Fuel Petcock Shut Off Valve Switch

  • Fitment - Fuel petcock valve switch compatible with Harley Sportster, Big Twin and Custom Tanks 1975-2006 Fuel Valve Petcock Switch Assembly (Please check to make sure that this will fit in your tank.).
  • Replaces Part #: Replace fuel vavle petcock shut off tank switch 62168-81 62167-81 62163-75 011401. Package Include: 1 x Petcock, 1 x Gasket Seal. Gasket prevent leakage. Oil seals act as seals to prevent leakage..
  • No Leaks - Internal Female 22MM thread. 1/4" barb accepts 1/4" ID hose, important to have proper placement of the o ring to prevent leaks.
  • Great Flow - The built-in filter allows for extra protection against debri entering your fuel system while still providing maximum flow. This fuel petcock valve switch parts has 3 positions switch. ON: Allow you to operate with normal fill-ups.
  • OFF: Completely shuts off gas flow when you are done riding.
  • RESERVE: Allow you to access the lower portion of the gas tank when gas level is low.
  • Good Quality - The petcocks are chrome-plated. Please check the threading on your bike to be sure this is what you need before you buy. Measure the outer diameter of the threaded outlet on the gas tank, not the inner diameter of the petcock nut..
Check Stock

DRELD Low Pressure LPG Propane Gas Fireplace Fire Pit Flame Failure Safety Control Valve Kit with 5/8” -18UNF Inlet Outlet Thermocouple Knob Switch, Fits for Gas Grill, Heater, Fire Pit

  • SIZE: 750 mm thermocouple with M8*1 threaded head. Bakelite knob OD 38mm, D shaft 6.1mm..
  • APPLICATION: The kit is suitable for low pressure repair control system for Gas Grill, Heater, Fire Pit, & Fireplace..
  • MATERIAL: The fire pit gas control valve kit is made of brass and plastic for durable use. Not OEM but fits OEM Standards..
  • HOW TO USE: Fix the valve on a plate or board of your grill or fire pit by the head screw and flange. Connect your inlet and outlet hose on inlet and outlet side. Fix the thermocouple nut M8 on the valve end tightly. Connect thermocouple and end thread well. Open gas by correct size knob and push your valve around 5-10s till the thermocouple head is heated enough. Release your hand and it works properly. If the gas valve shut off again when you release hand, then please check..
  • AFTER SALES SERVICE: The Propane Fire Pit Kit Replacement Part completed with a One-year Warranty. Should be there any question, please feel free to contact us..
Check Stock

EVIL ENERGY 1/2 Fuel Check Valve One Way Inline Non Return Diesel Gasoline Black 12mm OD,2PCS

  • Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring..
  • Size: 1/2inch (12mm) OD check valve can be work with 1/2 inch ID fuel hose..
  • Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉..
  • Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended).
  • Application: The fuel line check valve is widely uesd in vacuum system,carburetors and low pressure fuel systems..
Check Stock

EVIL ENERGY 3/8" Fuel Check Valve One Way Inline Non Return Diesel Gasoline Silver(10mm OD,2PCS)

  • Material: Made of aluminum alloy check valve,304 stainless steel spring,NBR rubber gasket and O-ring..
  • Size: 3/8inch (10mm) OD check valve can be work with 3/8 inch ID fuel hose..
  • Parameter: Min upstream pressure:0.2bar(2.9psi),working pressure range: 0.2-6bar (2.9-87psi),operating temperature range: -22℉ to 266℉..
  • Medium: Applicable to water, petrol, diesel, gas, oil, air, and other fluids.(Methanol is not recommended).
  • Application: The fuel line check valve is widely uesd in vacuum system,carburetors and low pressure fuel systems..
Check Stock

BISupply Heating Torch with 5 Meter Hose – Portable Torch Weed Burner Propane Torch Hose

  • ...ng materials, and preheat metals for welding and soldering.
  • The lengthy torch and hose allow you to work safely and easily in hard to reach areas.
  • [Easy to Use]: Connect the blow torch and hose to the other end of the hose to a gas tank.
  • After ensuring all connections are sealed, slowly loosen the gas tank valve and check for leaks.
  • Slightly loosen the blow torch flow valve and ignite directly at the nozzle, adjust the blow torch flow valve to reach the desired temperature.
  • Fire will extinguish naturally to remove gases from torch and hose.
  • [Built to Last]: Constructed of stainless steel, these weed burners are resistant to rust and corrosion.
  • The torch features a steel jet nozzle and a durable adjusting valve to control the flame size and temperature.
  • This kit also includes a natural rubber 5-meter hose that has a 300 PSI rating and is explosion proof.
  • Designed for use with 20 lb. propane tanks.
  • [Contents]: This propane torch weed burner kit includes (1) 33.5-inch (85.1 cm) Heat Gun with turbo blast trigger handle, flow valve knob, and jet nozzle torch tip, and (1) 15-foot (5 meters) gas torch hose.
  • The natural rubber hose weighs 1.8 lbs. (.8 kg) and is classified as “Class 2 – 6....
Check Stock

Valterra P23415LF 1/2\ Lead-Free Check Valve

  • Made of PVDF material, safe and non-toxic, can be used for a long time..
  • This check valve effectively prevents flow back of liquid or gas in the line..
  • Suitable for water, petrol, oil, and other fluids..
  • This check valve is simple in design and compact in size for easy installation, making maintenance easier and more efficient..
Check Stock

2 Pieces Air Compressor Valve ,Ball Type Drain Valve Brass Mini Ball Valve, 1/4 Inch NPT Male x NPT Female for Air Compressor

  • ... thoroughly, which can ensure gas quality and prevent corrosion of pneumatic tools and piping components.
  • 1/4 Inch female and male NPT threads: this compressor valve has type-1/4 inch standard connections, female and male NPT threads for connecting male threaded pipe fittings to female threaded pipe fittings, please check the thread information carefully before buying.
  • Besides, it is designed with pre-applied thread sealant for airtight connections and O-ring free construction.
  • Extensive usage: air compressor valve has a wide range of application including air, gas, liquid, steam, air compressor, air tank, water tank, air bottle and more, can drain water or other harmful liquids, gas thoroughly to ensure gas quality and avoid corrosion of pipes.
  • Quality brass to make: air tank drain valve uses quality brass to make, so it is stable and not easy to break, safe and reliable, with corrosion resistance, wear resistance, allowing you to use it with confidence for a long period.
  • Better work performance: brass mini ball valve is equipped with lever handle for convenient on/off manual control and full port flow, giving you higher operating efficiency and better work performance.
  • Also it has quarter-turn, and the double-seal system allows flow to go in either dir....
Check Stock

Uenhoy 5 Pcs 3/8" Check Valve 10mm Plastic Check Valve One Way Valve Non Return Check Valve for Fuel Gas Air Liquid

  • Material & Dimension -- The 3/8" check valve is made of high quality PP material, wear resistant, rust resistant, not easy to break, durable. The check valve measures 43.4mm/1.7" in full length and 10mm/0.39" in diameter..
  • Advantage -- The gas check valve is designed with a pagoda shaped card slot, non-toxic, non-slip, with strong adsorption performance and good air tightness..
  • Performance -- Working tempeture: -30 ℃ - 140 ℃. Under 80 ℃, has strong resistance to acid, alkali, salt and good corrosion resistance to organic solvent..
  • Application -- The one way check valve is applied for fluid system to prevent fluid from flowing backward, or for pneumatic system to prevent reverse flow of compressed air. Widely used in automotive parts, machinery industry, agriculture, household appliances, etc..
  • Satisfactory After-Sales Service -- Uenhoy is devoted to providing high quality service. Please feel free to contact us if the item has any quality problem. Your satisfaction is our biggest power..
Check Stock

HASMX 5140186-73 / E101362 Air Compressor Check Valve Replacement 90 Degree Left Valve for Select Craftsman, Porter Cable, and Husky Models, Black and Decker Part Number E101362 (1-Pack)

  • GAS Air Compressor Pilot check valve unloader valve combo 145-175 NG7 30 scfm Rating.
  • Unloader valve (continuous run unloader) for gas & electric powered air compressors.
  • 145-175 factory setting. pressure can be adjusted 30-40 psi up or down.
  • 1/2" COMPRESSION TOP Inlet x 1/2" MALE Pipe Thread outlet..
Check Stock