Top Full Tower Chassis Reviews

GIM ATX Mid-Tower Case White Gaming PC Case 2 Tempered Glass Panels & Front Panel RGB Strip Gaming Computer Case Desktop Case USB 3.0 I/O Port, Magnet Dust Filter, Water-Cooling Ready

  • 【Powerful Cooling System】Mid-Tower Computer Case has enough space for 10pcs 120mm GIM ARGB fans to provide lighting and excellent air performance at the same time, keep cooling. And GIM PC Case supports,ATX, Micro-ATX and Mini-ITX motherboards..
  • 【More Space】GIM Mid-Tower Chassis has 2pcs 4mm-thick tempered glass full-view side panels. The internal space is wide and easy to install 3 x 2.5" SSD ；2 x 3.5" HDD；ATX/Micro ATX/ITX motherboard.
  • 10*120mm ARGB Fan,maximum length 400mm GPU, And the flexible configuration of the cooling system supports 3x designated areas for the installation of water coolers with radiators of 360, 240 and 120 mm..
  • 【Super Cable Management】: A big space behind the motherboard tray for hidden cable management, where would help you clean up the interior and improve air performance. Mid tower gaming PC Case is equipped with 2pcs dust filter , and the top magnetic strip dust filter protects the case..
  • 【TOP I/O PANEL】GIM mid-tower ATX PC case designed with 1 x USB 3.0 Port, 2 x USB 2.0 Port, 1 x HD Audio, LED Button, Power, Reset. Our USB cable is shielded wire so that you can transmit data without interference..
  • 【No Risk to Purchase】: Any quality issue with your case, please feel free to contact us and let us....
Check Stock

Thermaltake The Tower 100 Mini PC Chassis

  • The Tower 100 is a vertically designed case constructed with solid steel all around, the vertical design allows the chassis to have a smaller footprint, and helps to minimize obstruction to your gaming and workspace area.
  • The three 4mm tempered glass windows of The Tower 100 are thicker and more scratch resistant when compared to standard acrylic.
  • The Tower 100 has well-designed removal magnetic fan filters on the back, on inner two sides, and at the inner bottom layer. At the base, the removable filters provide excellent dust protection and dirt reduction, ensuring a dust-free environment..
  • Supports a CPU cooler with a maximum height of 190mm, VGA with maximum length of 330mm, a power supply with a length of up to 180mm, two 2.5” SSDs with the side bracket, and two 2.5” or two 3.5” HDD at the rear (without rear fan).
  • Two 3.0 USB and one USB 3.1 (Gen 2) Type C ports are placed on the top panel to grant direct access when needed..
Check Stock

Strobe Receiver

  • Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
  • The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..
  • 12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
  • The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
  • It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..
Check Stock

GIM ATX Mid-Tower Case Black Gaming PC Case 2 Tempered Glass Panels & Front Panel RGB Strip Gaming Computer Case Desktop Case USB 3.0 I/O Port, Magnet Dust Filter, Water-Cooling Ready (Black)

  • ...erful Cooling System】Mid-Tower Computer Case has enough space for 10pcs 120mm GIM ARGB fans to provide lighting and excellent air performance at the same time, keep cooling. And GIM PC Case supports,ATX, Micro-ATX and Mini-ITX motherboards..
  • 【More Space】GIM Mid-Tower Chassis has 2pcs 4mm-thick tempered glass full-view side panels. The internal space is wide and easy to install 3 x 2.5" SSD ；2 x 3.5" HDD；ATX/Micro ATX/ITX motherboard.
  • 10*120mm ARGB Fan,maximum length 400mm GPU, And the flexible configuration of the cooling system supports 3x designated areas for the installation of water coolers with radiators of 360, 240 and 120 mm..
  • 【Super Cable Management】: A big space behind the motherboard tray for hidden cable management, where would help you clean up the interior and improve cooling performance. Mid tower gaming PC Case is equipped with 1pcs dust filter, and the top magnetic strip dust filter protects the case..
  • 【TOP I/O PANEL】GIM mid-tower ATX PC case designed with 1 x USB 3.0 Port, 2 x USB 2.0 Port, 1 x HD Audio, LED Button, Power, Reset. Our USB cable is shielded wire so that you can....
Check Stock

Thermaltake Tower 100 Turquoise Edition Tempered Glass Mini Tower Computer Chassis Supports Mini-ITX CA-1R3-00SBWN-00

  • The Tower 100 Mini ITX Chassis is the mini version of our iconic case The Tower 900.
  • 4mm Thick Tempered Glass Window Panels: three 4mm thick tempered glass window panel at front, left, and right.
  • Handy I/O Port and unique internal design: with a high speed Type-C connector and two USB 3.0..
  • The Tower 100 supports up to two 3.5’’ HDD or four 2.5’’ SSD, include two bracket for 2.5’’ SSD at right side..
  • Dust Filter Design: Eight super fine filters on the right, left, top, and at the bottom are designed to provide excellent protection against dirt and dust from the outside of the case and is easily removable for cleaning..
Check Stock

Thermaltake LCD Panel Kit for The Tower 500, 3.9" LCD Display, Supported by TT RGB Plus 2.0 Software, Presents Real time Information, Easy custimization, AC-062-OO1NAN-A1

  • Design for Tower 500 Chassis : LCD Panel Kit is an exclusive accessory for the Tower 500 chassis. Fully fitted front panel design provides easy installation..
  • Personalize Your LCD Display : The 3.9'' LCD display presents real-time information and plays JPG and GIF files with 128*480 resolution..
  • Fully Customizable with TT RGB Plus 2.0 : Monitor frequency and real-time temperature directly from the 3.9” LCD display, and upload any images or GIFs to add extra flair with the TT RGB Plus 2.0 software..
  • Unite Your LCD Display : LCD Panel Kit can be easily paired with other Thermaltake Ultra series components and create interaction among the LCD panels..
  • TT RGB PLUS 2.0 Software : The software provides more lighting effects and PC monitoring functions, users can even show the time and weather information on the display..
Check Stock

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- Black

  • New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
  • High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
  • Vertical GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED..
  • Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
  • Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
  • Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
Check Stock

EZDIY-FAB Vertical PCIe 4.0 GPU Mount Bracket Graphic Card Holder with 5V 3 Pin ARGB LED Module, Video Card VGA Support Kit with PCIe 4.0 X16 Gen4 17cm/6.69in Riser Cable 90 Degree Right Angle- White

  • New designed bracket to vertically show off GPU. Supports most 1, 2, and 3 slot graphic cards. Designed for most full/mid ATX tower with at least 7 available PCI slots..
  • High quality material increases structural toughness and supports the large graphics card weight on the market. Beautiful metal surface treatment, installed in the chassis to form a beautiful landscape..
  • Vertical GPU Bracket with ARGB LED lighting effects, Synchronizable ARGB lighting via motherboard (AURA, Mystic, Fusion):Support M/B 3 Pin ARGB Header (5V, D, G), Please note : Not Support 4pin RGB header (+12V, G,R,B), 12 volts can destroy LED..
  • Thanks to Stretchable Structure design, you would be able to connect HDMI, DP cable to your GPU without hassle, compatible to PC chassis with PCI grilles..
  • Please test the riser cable onto the GPU first before installing the GPU to vertical bracket mount./ Please refer to length spec image and confirm that there is enough space of your chassis..
  • Supports PCIE 4.0/3.0/2.0/1.0,Compatible with RTX3090, RTX3080, RTX3070, RTX3060TI, RX6900XT, RX6800..
Check Stock

Thermaltake Tower 100 Racing Green Edition Tempered Glass Mini Tower Computer Chassis Supports Mini-ITX CA-1R3-00SCWN-00

  • The Tower 100 Mini ITX Chassis is the mini version of our iconic case The Tower 900.
  • 4mm Thick Tempered Glass Window Panels: three 4mm thick tempered glass window panel at front, left, and right.
  • Handy I/O Port and unique internal design: with a high speed Type-C connector and two USB 3.0..
  • The Tower 100 supports up to two 3.5’’ HDD or four 2.5’’ SSD, include two bracket for 2.5’’ SSD at right side..
  • Dust Filter Design: Eight super fine filters on the right, left, top, and at the bottom are designed to provide excellent protection against dirt and dust from the outside of the case and is easily removable for cleaning..
Check Stock

Asus ROG Strix Helios GX601 RGB Mid-Tower Computer Case for up to EATX Motherboards with USB 3.1 Front Panel Smoked Tempered Glass Brushed Aluminum and Steel Construction and Four Case Fans Black

  • Mid-tower with support for EATX motherboards featuring a metal chassis, 4mm-thick smoked, tempered-glass full view side panels, three easy-to-clean dust filters, and space for 9 Storage drives.
  • Premium cable management includes translucent rear panel, adjustable multi-function cover featuring GPU support brackets and pre-run chassis cables.
  • Keep your cool with built in fan hub, four 140mm fans and up to seven optional fan-mounting points.
  • Custom Liquid Cooling ready features a water pump/ reservoir mounting bracket and support for radiators up to 420mm in length and 90mm thick (with fans).
  • Graphic card mounting options include Up to 2x vertically mounted Graphics cards or 3x horizontally mounted Graphics cards using the 7 expansion Slots.
Check Stock

Lian-Li O11 Dynamic EVO ATX Mid Tower Tempered Glass Computer Case, Black

  • Super Tower Chassis : 16.8 Million-Color RGB-Imbued XL-ATX Tower.
  • 3-Sided Glass Viewing Protection: Surrounded in 5mm Thick Tempered Glass Panels (Front and Both Sides) to Protect and Present.
  • Vertical Radiator View: Supporting Proper Placement for 120mm and 140mm Radiator Applications up to 480mm in Length.
  • Dual GPU Placement: 2-Way GPU Placement Allows Vertical GPU Mounting,I/O Port:USB 3.0 x 4, Type-C x 1,HD Audio x 1.
  • Fully Modular Design: Provides Multiple Configurations and Flexibility for Custom PC Enthusiasts.
Check Stock

Delfield 3516459 3.00 X 7.00 Receiver

  • Directly printing inductor traces on the PCB board greatly simplifies the difficulty of assembly..
  • 12V power supply, 9.2 x 7.5cm PCB board size, which can be directly used in 97 x 40 x 75mm aluminum chassis.
  • It is specially used to receive the call between the aircraft and the tower. With the antenna with good performance (VHF band Yagi antenna), the open area can receive various types of aircraft and tower calls within about 190Km. Please pay attention to your favorite friends..
  • The AGC circuit on the board ensures comfortable listening, while the squelch function avoids long-term noise..
  • The kit uses a band-pass filter, 3355 high-amplifier, NE602 mixing, MC1350 mid-amplifier solution, which can receive AM signals of 118-136MHz..
Check Stock

Thermaltake Tower 100 Metallic Gold Edition Tempered Glass Type-C (USB 3.1 Gen 2) Mini Tower Computer Chassis Supports Mini-ITX CA-1R3-00SDWN-00

  • The Tower 100 Mini ITX Chassis is the mini version of our iconic case The Tower 900.
  • 4mm Thick Tempered Glass Window Panels: three 4mm thick tempered glass window panel at front, left, and right.
  • Handy I/O Port and unique internal design: with a high speed Type-C connector and two USB 3.0..
  • The Tower 100 supports up to two 3.5’’ HDD or four 2.5’’ SSD, include two bracket for 2.5’’ SSD at right side..
  • Dust Filter Design: Eight super fine filters on the right, left, top, and at the bottom are designed to provide excellent protection against dirt and dust from the outside of the case and is easily removable for cleaning..
Check Stock