Top Fuel Sender Gauge Assembly Reviews

MOTOR METER RACING 6 Gauge Set Classic with GPS Electrical Speedometer Digital Odometer Black Dial

Speedometer & Tachometer: Standard 3-3/8"(85mm) sized back. For any 1 to 9 cylinder gas powered engine & 12-volt negative ground systems. Volt gauge, Oil pressure gauge, Water temp gauge, Fuel gauge: Standard 2"(52mm) sized back..
FEATURES: In-dash design, Light bulb illumination, Convex lens, Stainless bezel, Plastic housing. Cylinders switch on the gauge back..
Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI..
INCLUDES: GPS Sensor & Converter, Water temp sensor (Thread size: 1/8 NPT), Oil pressure sensor (Thread size: 1/8 NPT), Fuel level sender, Power harness, U-bracket kit, Tachometer Filter x 2, Installation Instructions..
One-year warranty for non-human factor damage and free lifetime technical support..

Check Stock

ARTILAURA 6 Gauge Set-GPS Speedometer 120MPH, Tachometer, Fuel Gauge, Water Temperature Gauge, Oil Pressure Gauge, Voltage 7 Color Backlight for Car AUTO Boat Marine(White)

... Metal, Rubber and Plastic. Scratch resistant curved glass lenses. IP67 waterproof and dustproof grade..
⭐⭐⭐⭐⭐[Attention]: Package Includes GPS Antenna, Tachometer Sensor(M16*1.5), Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), 240-33 ohms Fuel Level Sender & Installation Instructions . Please contact us if you are dissatisfied with our products, the response will be taken in 24 hours and provide proper solutions..

Check Stock

Sunpro 1 1/2' Mini Triple Gauge Kit Black / Black Bezel New CP8094 Warranty

Fuel level measures from E to 1/4 to 1/2 to 3/4 to F.
2-in white face dial with black numbers and red pointer.

Check Stock

Sealed Power 224-51198 Oil Pump Repair Kit

Adjustable Size: This oil pump cap cover has large adjustment range which is suitable for different oil pump caps.185mm maximum diameter, 135mm minimum diameter..
This tool is ideal for removing 5 & 7 hole fuel tank lids.Bending foot type with radian design, more suitable for the installation surface of oil pump cover, to ensure that the operation is not easy to slip..
A Must Have Tool: This fuel sender tank lock ring tool will help tackle the job of replacing the fuel sender fast and effective without damaging the oil pump rings..
Intended Use: This fuel pump removal tool can easily remove and install lock ring on the fuel tank when servicing the fuel pump or fuel sending unit. （use with a 1/2" drive ratchet or breaker bar）.
Applications: This fuel tank ring tool is suitable for vehicles to remove and install the fuel pump retaining ring that holds the fuel pump module on the gas tank.(Check the size before buy).

Check Stock

MOTOR METER RACING EVO Series Digital 6 Gauge Set Includes GPS Sensor mounting kit

...y with the display of precision. It is designed for in-dash usage, while suitable on-dash mounting cups available to be ordered — flat clear acrylic lens with plastic housing, designed to be installed with ease..
Packaged: Speedometer GPS sensor and convector, fuel level sender, water temp sensor (Thread size: 1/8 NPT), oil pressure sensor (Thread size: 1/8 NPT), 3-3/8" mounting stand (2 pcs), wiring harness, installation manual..
Warranty: One-year for non-human factor damage and free lifetime technical support.

Check Stock

Rupse Fuel Sender Unit Boat Fuel Tank Sending Unit Fuel Water Level Sensor Stainless Steel Fuel Sender and Fuel Gauge for Boat Car Truck RV (6' (150mm))

[High Precision and Long Life]: The exterior is made of stainless steel, and the interior is controlled by high-quality reed switches. The sensor is corrosion-resistant, does not rust, has a long life, stable output signal, and accurate measurement. Suitable for gasoline, diesel, water, methanol, etc..
[Easy to Read]: The fuel level gauge has 8 adjustable backlight colors, IP67 waterproof, stainless steel frame, anti-fog curved glass, easy to read (Empty-1/2-Full)..
[Easy Installation]: SAE 5 hole mounting pattern, NBR material gasket, good sealing performance, high oil resistance, with M5 5 screws, 10 quick wiring terminals, easy and quick installation by referring to the wiring diagram..
[Multi-Size]: Various sizes can be selected to meet different sizes of fuel tanks for Automobiles, Ships, Yachts, RV, Agricultural vehicles and Industrial equipment..
Note: To allow the sender not hit the bottom of the tank, the length of sender should be 1" less than the depth of the tank if tank is plastic, and 0.5" less than the depth of the tank if tank is metal ..

Check Stock

240-33 ohms 4' (100mm) Fuel Tank Sending Unit for Marine Boat Truck Car Fuel Sending Unit Marine Fuel Gauge Sending Unit Truck Gas Tank Fuel Sender Fuel Water Level Sensor

Wide Range of Application: The fuel gauge sending unit is widely used in boat, truck, bus and marine fields, and can support marine and automotive fuel level gauges and water level gauges.
Simple Installation: The package comes with mounting screws, washers, just remove the old gas tank fuel sender and install the new one, the water level sensor is a standard SAE 5 hole mounting pattern, and the installation takes about 15 minutes in total, you can let the fuel gauge work again, the red wire is positive and the blue wire is negative.
Please Note: In order to keep the fuel water level sensor from touching the bottom of the tank, if the tank is made of metal, the length of the sensor should be 0.5 inch less than the depth of the tank. If the tank is made of plastic, the length of the sensor should be 1inch less than the depth of the tank.

Check Stock

Auto Meter 7004 InVision Direct Fit Digital Dash LCD 73-87 Chevy/GMC Full Size Truck

...ing to Users' Needs in Different Conditions. It is Designed for In-dash Usage, While Suitable On-dash Mounting Cups Available to be Ordered - Flat Clear Acrylic Lens with Plastic Housing, Designed to be Installed with Ease.
Packaged: Speedometer GPS Sensor, Fuel Level Sender, Water Temp Sensor (Thread size: 1/8 NPT), Oil Pressure Sensor (Thread size: 1/8 NPT), 3-3/8" Mounting Stand (2 pcs), Daisy Chain, Wiring Harness, Installation Manual.
Warranty: One-year for Non-human Factor Damage and Free Lifetime Technical Support.

Check Stock

5 Gauge Speedometer Set, Digital Gauge Cluster, Black Face, 3-3/8, Mechanical Speedometer

This complete gauge kit includes the necessary tubing, adapters, and fuel level sender to install it into nearly any vehicle.
Black face with stainless bezel delivers a classy seamless look.
3-3/8" speedometer and 2-1/16" component gauges fit a variety of dash inserts and bezels.
Speedometer has 5/8"-18 connection for a speedometer cable (cable is sold separately).
All five gauges are perimeter lit with white lighting to ensure visibility at night.

Check Stock

MOTOR METER RACING EVO Series Digital 6 Gauge Set - 3-3/8" 85mm Speedometer & Tachometer - 2-1/16" 52mm Voltage, Fuel Level, Water Temperature & Oil Pressure

...ing to Users' Needs in Different Conditions. It is Designed for In-dash Usage, While Suitable On-dash Mounting Cups Available to be Ordered - Flat Clear Acrylic Lens with Plastic Housing, Designed to be Installed with Ease.
Packaged: Speedometer GPS Sensor, Fuel Level Sender, Water Temp Sensor (Thread size: 1/8 NPT), Oil Pressure Sensor (Thread size: 1/8 NPT), 3-3/8" Mounting Stand (2 pcs), Daisy Chain, Wiring Harness, Installation Manual.
Warranty: One-year for Non-human Factor Damage and Free Lifetime Technical Support.

Check Stock

Suuonee Electronic Boost Gauge Sender, Auto Car Electronic Boost Gauge Sender/Sensor Unit Practical Accessory

Adaptation: Car Electronic Boost Gauge Sender is only fits for Ford Mustang 86-93 gauge. Pressure sensor with vacuum tube for replacing defi link pressure gauge..
High Quality: Electronic Boost Gauge Sender is made of high quality material for maximum durability, which has long service life. Good quality can provide a safer guarantee for your life..
Excellent Performance: Electronic Boost Gauge Sensor adopt advanced manufacturing, high reliability and high performance. Original standard, direct replacement for the old or broken one..
Easy To Install: Electronic Boost Gauge Sensor is easy to install, no complicated tools required, convenient to use. Let you get rid of the trouble of installation..
Quality Assurance: We offer a 12 month warranty, true worry free shopping experience. If you have any problem, feel free to contact us, our professional mechanic will sort things out for you..

Check Stock

JIFETOR Universal Auto Gasoline Gas Fuel Injection Pressure Tester Gauge Tool Set Only for Bosch CIS System Car Truck SUV Motorcycle ATV RV SUV Blue Case

BOSCH CIS DEDICATED SYSTEM: Fuel pressure test gauge kit includes 1PC fuel pressure gauge tester with rubber hose and drain hose, 1PC hose assembly for Bosch CIS (Continuous Injection System), and 9PCS metal adapters. More professional, more efficient. Specifically recommended for use with import and domestic gasoline vehicles including cars, SUVs, and trucks using Bosch CIS systems. If you need a full system of fuel injection pump set please serach for B085TM8577 in our store..
FUEL INJECTION GAUGE TESTER: Fuel pump pressure tester is an essential part of the troubleshooting process of automotive fuel injection systems. Gauge is made to detect bad fuel pumps, bad pressure regulators, leaking injectors and clogged fuel filters. Fuel injection tester features 4" big dial, built-in hoses with pressure relief valve, and quick coupler system. Low pressure range (0-140 psi/0-10 bar) makes it limited to gasoline engines for fuel pressure test..
HOSE WITH METAL ADAPTERS: Fuel pressure gauge set contains 1PC built-in 43" long rubber hose with 44" clear drain hose, and 1PC 27.5" Bosch CIS- specific hose valve assembly for test connection. Rubber hoses endure torsion, temperature and pressure extremes to ensure safe use. Brass for corrosion resistance, and ducti....

Check Stock

MOTOR METER RACING Electrical 6 Gauge Set - 3-3/8\ 85mm Electrical Speedometer & Tachometer - 2-1/16\ 52mm Voltage, Fuel Level, Water Temperature & Oil Pressure - Black Dial - White Needle

MOTOR METER RACING Classic Series 6 Gauge Kit is Designed for Vintage Style, Features the 6 Most Essential Gauges for Any Car or Truck's Instrument Cluster - Includes Speedometer & Tachometer - Voltage, Fuel Level, Water Temperature, Oil Pressure.
Fits any 1 to 9 Cylinder Gas Powered Engine & 12-Volt Negative Ground Vehicle. Works with ECU Signal - Black Dial - 316 Stainless Bezel - White Light bulb Illumination - Convex Lens & White Needle.
Speedometer Readings from 0 to 140 MPH, Tachometer Readings from 0 to 8000 RPM, Volt Readings from 8 to 16V, Fuel Level Readings from E, 1/2, F, Water Temperature Readings from 100° to 250°F, Oil Pressure Readings from 0 to 100 PSI.
Package Includes 2' Speedometer Power Harness, 2' Tachometer Power Harness, Water Temp Sensor (1/8 NPT), Oil Pressure Sensor (1/8 NPT), Fuel Level Sender, U-bracket kit & Installation Instructions.
One-year Limited Warranty & Free Lifetime Technical Support.

Check Stock