Top Fuel Line Fittings Reviews

EVIL ENERGY 6AN to 3/8 Barb Push Lock Hose End Fitting 45 Degree Blue&Red 2PCS

6AN female swivel to 3/8 barb fitting 45 Degree.
Please attention that AN6 push lock fitting only be worked with rubber fuel line. It can not be installed on PTFE Hose, Nylon Braided Hose, or....
Thread Size of 6an 45 Degree push lock fitting is 9/16-18UNF and the rubber fuel line which works with should be 3/8"..
Push on locking fittings are much more easier on installation than swivel and PTFE fittings. (high-pressure system not recommended).
EVIL ENERGY Provide plenty kind of fuel fittings, Swivel, Push-on lock, PTFE hose end and other fitting adapters..

Check Stock

Akozon 16pcs C5 Filter Fuel Injection Line Fitting Adapter Kit OE: GF822 10299146 19239926 Fit for LS1 LS2 LS6 LS3 LQ4

【Application】The Fuel Line Kit fits for LS1, LS2, LS6, LS3, LQ4, LQ9, LM7, L99, L76, LSX..
【OE Number】Replacing OE numbers for reference: GF822, 10299146, 19239926. Built to meet standard specification, strictly follow factory quality control..
【Practical Accessories】The Fuel Line Kit includes 1pcs C5 fuel filter, 1pcs high pressure fuel injection hose, 1pcs LS fuel rail adapter 5/16, 2pcs LS fuel rail adapter 3/8, 1pcs LS filter connector 3/8 (Already Installed in the Filter), 2pcs AN6-1/4NPS, 2pcs AN6-45° straight fittings, 6pcs AN6-0° straight fittings..
【High Quality】New and quality Fuel Line Kit, manufactured with the highest quality aluminum + rubber material, high strength for maximum durability, high reliability..
【Simple Installation】Simple and convenient to install, no complicated tools required. If you understand your vehicle perfectly, you can choose to install it yourself..

Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

...ose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..

Check Stock

JIFETOR Fuel Injection Pump Pressure Tester Gauge Kit, Car Gasoline Gas Fuel Oil Injector Test Manometer Tool Set 0-100PSI, Universal for Auto Truck SUV Motorcycle ATV RV

...gh pressure injection pump or high pressure fuel track on direct-injection engine, due to the fuel gauge's low pressure range. Test fuel pressure is an essential part of the troubleshooting process of fuel injection system..
3 CONNECTION TYPES FOR TU-113 FUEL PRESSURE GAUGE TOOL KIT: The set is equipped with various fittings and hoses to connect for testing. 14"L hose is used for hooking up directly to the 1/4" SAE standard Schrader valve on fuel pump, 11"L hose for the small Schrader valve (for some Ford), and 8"L hose for M6 fuel pressure test port. 1/4" barbed brass fittings is direct for special test outlet on engine, and aluminum tee splices in-line between the fuel pump and engine for most vehicles..
PRIMARY FUEL PRESSURE TEST KIT: Pressure gauge adopts rubber cover protected 2-3/4" large dial with 0-100psi/0-7bar range and dual color coded scale for easy reading. The hoses use rubber nylon resin material, and the build-in nylon can strengthen the hose with increased stress resistance. Please note, there is no pressure relief valve and drain hose, please wrap cloth around hose connection before relieving pressure from fuel line and removing testing components..
CHECK FUEL INJECTOR PUMP PRESSURE: The pressure gauge is designed for checking the fuel....

Check Stock

EVIL ENERGY 6AN to 6AN Male Flare Coupler Union Straight Fuel Hose Adapter Fitting Black 2 PCS

Package Included: 2 pcs x 6AN to 6AN Male Flare Coupling Union Adapter.
Thread size of 6AN male coupler is 9/18-18 JIC, can use to splice or extend a line, works with female thread fitting..
Black 6061-T6 aluminum 6AN flare union work temperature: -65 to +252 degree F, max pressure: 1000 psi, ultimate torque: 25N..
Male to male flares coupler usually used in fuel system,such as fuel hose extend, line connect to fuel filter, fuel pump, cooler system..
Mala union fittings can works with EVIL ENERGY Swivel fitting, push lock fitting and female AN fittings.Please match the correct size..

Check Stock

Actron CP7818 Fuel Pressure Tester Kit,Black

Actron's Fuel Pressure Tester Kit works on most domestic fuel injected vehicles having a Schrader valve test port on the fuel rail.
Use on the following: Ford high pressure central fuel injection and GM, Ford, and Chrysler multi-port fuel injection - multi-port means one fuel injector per cylinder.
Tests: fuel pump check valves (leak down test), fuel pressure regulators, weak fuel pumps, fuel line integrity (clogged or damaged fuel filters), leaking injectors.
Kit includes: large easy-to-read 2-1/2 inch gauge with standard (0-100 psi) and metric (0-700kPa) scales, Ford fuel line adapter, solid brass fittings, & pressure relief valve for safe, clean testing.

Check Stock

Motion Pro 12-0049 Tygon Grey 3/16 x 3 Premium Fuel Line

3/16-inch I.D. x 3 Foot Grey Tygon Premium Fuel Line.
Stronger and more durable than vinyl fuel line.
Fuel line stretches easily over fittings or petcocks and is safe for use with any type of gasoline.
Resistant to direct sunlight, swelling, hardening and/or cracking and remains flexible in temperatures from: 35 F to 165 F.
Warning: Not for use with fuel injected engines.

Check Stock

Lisle 39210 Main Fuel Line Disconnect

GET THE JOB DONE: The ABN | Master Deluxe AC Line Disconnect Tool Fuel Disconnect Tool Set offers a wide range of tool sizes to separate quick disconnect fittings on oil/fuel lines, heater lines, and AC cooling lines.
FITS YOUR VEHICLE: Fuel line and AC tools for automotive applications are compatible with several Ford, GM, Mazda, and other vehicles with automatic transmission lines.
Measure your application to ensure correct fitment.
EASY TO USE: Each fuel tool is color-coded by size for easy identification.
Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
Release the fuel line locking mechanism by listening for the slight “click” that means that it has done its job for easily removal.
BUILT TO LAST: Each fuel line quick disconnect heater hose disconnect tool is constructed from hard plastic for strength and longevity that resists rust and corrosion.
Spring-loaded fuel line tools design allows to easy opening and spring closing when pressure is released.
PACKAGE CONTENTS: Package contains (6) fuel line pliers transmission tools – Red 5/16-inch (8mm), gold 3/8-inch (9.5mm), dark gray 1/2-inch (13mm), blue 5/8-inch (16mm), black 3/4-inch (19mm), silver 7/8-inch (22mm).

Check Stock

GlowShift 8mm 5/16 Fuel Line Fuel Pressure Sensor T-Fitting Adapter Compatible with Subaru Impreza WRX STI 2002-2014

GlowShift 8mm Fuel Line Fuel Pressure T-Fitting Adapter Allows Users to Install a Fuel Pressure Sensor to the Fuel Line.
Compatible with 2002-2014 Subaru Impreza WRX STI.
Features 8mm (5/16") Barbed Fittings, 1/8-27 NPT Female Thread Port for Fuel Pressure Gauge Sensor & 2 Hose Clamps to Secure Fuel Line to T-Fitting.
Includes Step-By-Step Installation Instructions.
GlowShift Guarantee with One Year Limited Warranty & Free Lifetime Technical Support.

Check Stock

Five Oceans FO4277 Brass Fuel Hose Barb 1/4 inches NPT Thread x 3/8 inches Hose, Crafted for Fuel Systems, Sharp-Edged Barbs, For Any Portable Tank

This Five Oceans Fuel line connector can be installed with confidence using our pipe-to-hose fittings..
Perfectly crafted for fuel systems, these pipe hose fittings are the ideal use for any portable tank..
This machined brass fitting features a male 1/4 inches NPT thread and sharp-edged barbs for 3/8 inches hose to provide excellent grip. Brass construction resists corrosion..
Barbs provide excellent gripping power for fuel line connections.
We recommend the use of fuel compatible thread sealant to prevent galling and provide the best possible connection.. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.

Check Stock

AutoXscan AC Disconnect Fuel Line Disconnect Tool Set – Fuel Line Tool Fuel Line Removal Tool 7pcs Kit 1/4-7/8 inch

Suitable for : Fuel line and AC tools for automotive applications are compatible with several Ford, GM, Mazda, and other vehicles with automatic transmission lines.
Measure your application to ensure correct fitment..
Package contains (7) fuel line pliers transmission tools:1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
AC Line Disconnect Tool Fuel Disconnect Tool Set offers a wide range of tool sizes to separate quick disconnect fittings on oil/fuel lines, heater lines, and AC cooling lines..
Simple one-handed operation with easy-grasp end and unique offset design to access hard-to-reach confined or obstructed areas.
Release the fuel line locking mechanism by listening for the slight “click” so easily to use..
Each fuel line quick disconnect heater hose disconnect tool is constructed from hard plastic for strength and longevity that resists rust and corrosion.
Spring-loaded fuel line tools design allows to easy opening and spring closing when pressure is released..

Check Stock

Fuel Line Pliers Tweezer Set DEF Exhaust Fluid Lines Disconnect Removal Tools

FUNCTIONS: The Oil Cooler Line Quick Disconnect Kit provides 7 different sizes tool to remove/disconnect fittings on fuel lines, heater lines, AC cooling lines and other quick disconnect couplings..
FIT FOR VEHICLES: The AC Fuel line disconnect tools are compatible with most Ford, GM, Chrysler and Mazda models. It also fits for some other vehicles while the automatic transmission line is within the sizes..
EASY TO USE: The compact size is easy to grasp and the angled design allows to access the hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
WHAT YOU GET: The Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..
DURABILITY: All fuel line quick disconnect heater hose disconnect tools are made of hard plastic to secure the strength and sturdiness..

Check Stock

EVIL ENERGY 10AN Straight Swivel Hose End Fitting for Braided Fuel Line Aluminum Black

The female AN10 swivel fittings are made of lightweight aluminum alloy 6061-T6 material for strong strength and good durability. Black anodized for....
10AN swivel hose end is widely used in oil/ fuel/ water/ fluid/ airline etc. Connect oil gas line, braided fuel line ,clutch hose,turbo line etc. Our....
These new full flow swivel hose ends swivel 360° to allow for a quick alignment of the hose after assembly.Swivel hose end can be reused and recycle....
Weld-free construction that gives better fluid flow and integrity over the normal brazed together hose ends. Swivel fittings are easy to use and don't....
EVIL ENERGY provide this product have 3-month warranty.We value your shopping experience and strive to offer a high-quality product and service..

Check Stock