Top Cooler Line Fittings Reviews

Stay Afloat

Instantly stop leaks, no mixing, no cure time. Use to water leaks above or below the water line..
Use on broken or leaking thru-hulls, leaking transducers, use to change call cocks in the water.
Use a a temporary boat plug, bait tank plug, cooler plug.
Use to seal window leaks, waterproof fittings, key holes/locks.

Check Stock

FEL-PRO ES 70599 Fuel Injector O-ring Set

Durable Material: Made of heavy plastic, durable, resistant to fuel and solvents, light weight, small size, easy to grip, spring-loaded design, long life..
Function: The Oil Cooler Line Quick Disconnect Kit provides 7 different sized tools for removing/disconnecting the fuel line, heater line, AC cooling line and other accessories on the quick disconnect fittings..
SIMPLE HANDLING: Compact size for easy grip and access to hard-to-reach lines. Hold the notch of the tool against the wire and open the clamp with a push. Then you can plug the line into the tool and disconnect it. (Please check the outer diameter of the fuel/oil/air conditioning piping before use.).
What You Get: Transmission Line Removal Tool Set Contains 7 Opening Sizes: 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"..
Wide applicability: 7 sizes of disconnect tools for a variety of fuel lines and other quick disconnects. If you have any questions about this product, please keep in touch with us in time..

Check Stock

Autoutfit 6AN 3/8" LS Swap EFI Fuel Injection Hose Line Fitting Kit, Nylon Braided PTFE Fuel Hose 25Ft

...ose*1，6AN PTFE straight hose end*6，6AN PTFE 45 Degree hose end*2，6AN to 3/8" hose adapter fitting*2， AN6 to 3/8"quick disconnect male*1，6AN to 5/16" hose adapter fitting*1..
【Premium Material】Nylon braided PTFE fuel line hose and aluminum alloy fittings..
【Product Performance】PTFE fuel line with long service life, wear resistance and high temperature resistance. Withstands Operating Temperatures from -76℉ to 446℉ (-60℃ to 230℃). Maximum working pressure: 3000 psi. Bursting pressure: 10000psi. .
【Application】This PTFE Fuel line Kit can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. This kit can be used in EFI LS system, ls engine swap and EFI conversion fuel line, turbo oil feed and boost line, transmission oil cooler line, carb fuel line, fuel return line, vapor return line, vacuum line, fuel supply line and turbocharger fuel line..
【Installation recommended】 PTFE hose relatively hard, it can't be bend and folding in half..

Check Stock

25PCS Fuel Line Disconnect Tool Set & Master Quick Disconnect Tool Kit for AC Fuel Line Transmission Oil Cooler Line Disconnects，Compatible with Most Ford Chevy GM Models,Blue

...Widely applied for domestic and foreign hoses and automotive lines, compatible with Most GM Ford Dodge Mazda and Chrysler..
[DIFFERENT COMPONENTS & SIZES FOR MUTI-USES]--The fuel line removal tool set includes 6 pcs of color-coded ac disconnect fuel line removal tool set , 7 pcs of removing ac & fuel line disconnect fittings , 4 pcs of quick ac fuel line remover , 2 pcs of oil cooler line remover as well as scissor fuel line disconnect tool , cf fuel line w/hair pin connector and rubber band. Various common tools are easy for operation to cover different purposes..
[DURABLE MATERIAL & High Quality]--The 25 pcs fuel line disconnect tool kit made of high-quality aluminum alloy and plastic steel is durable . Each tool , even the carrying plastic case is designed and tested for strength and longevity..
[HANDY DESIGN & EASY STORAGE]--All cooler line removers are set in unique and organized locations in a blow-molded case for avoiding misplacing your tools between uses, while the outside handy case is lightweight and convenient for carrying or fit on any shelf or storage area..
[SATISFACTORY CUSTOMER SERVICE]--AutoWanderer Tool specializes in high-quality auto parts and auto supplies kits. Any tech or using questions on this master quick disconnect tool kit , ....

Check Stock

ASD 3/16 and 1/4 Brakeline fittings kit nuts unions compression fittings 70 Pieces

Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
Contains (5) 3/16″ OD Compression Brake Line Fittings.
Contains (5) 1/4″ OD Compression Brake Line Fittings.

Check Stock

Fuel Line Disconnect Tool Set Master Quick Disconnect Tool Kit for AC Fuel Line Transmission Oil Cooler Line Disconnects Compatible with Most Ford Chevy GM Models Red

...Widely applied for domestic and foreign hoses and automotive lines, compatible with Most GM Ford Dodge Mazda and Chrysler..
[DIFFERENT COMPONENTS & SIZES FOR MUTI-USES]--The fuel line removal tool set includes 6 pcs of color-coded ac disconnect fuel line removal tool set , 7 pcs of removing ac & fuel line disconnect fittings , 4 pcs of quick ac fuel line remover , 2 pcs of oil cooler line remover as well as scissor fuel line disconnect tool , cf fuel line w/hair pin connector and rubber band. Various common tools are easy for operation to cover different purposes..
[DURABLE MATERIAL & High Quality]--The 25 pcs fuel line disconnect tool kit made of high-quality aluminum alloy and plastic steel is durable . Each tool , even the carrying plastic case is designed and tested for strength and longevity..
[HANDY DESIGN & EASY STORAGE]--All most popular cooler line removers for for fuel and air conditioning lines are set in unique and organized locations in a blow-molded case for avoiding misplacing your tools between uses , while the outside handy case is lightweight and convenient for carrying or fit on any shelf or storage area..
[SATISFACTORY CUSTOMER SERVICE]--AutoWanderer Tool specializes in high-quality auto parts and auto supplies kits. This master quick....

Check Stock

Lisle 37140 Disconnect Pliers, 45 Degree

The Low Profile Design with 45° Bend Disconnects Fuel Line, EVAP Line Fittings and DEF Fittings in Hard-to-Reach Areas.
Low-profile design with 45° bend allows the tool to fit between the top of the fuel tank and vehicle.

Check Stock

Utah Pneumatic Dot Air Fittings Tee Union 1/4”Od 1/4” Npt Air Push Fittings Male Female brake tube fittings Push In Fitting D.O.T Approved For Sae Brake Line fittings Applications Pack Of 2

Typical application: Air brake systems push dot fittings pneumatic fittings brass air brake fittings dot air line fittings.
Maximum operating pressure of 150 psi dot air brake fittings air line fittings 1/4 dot push union dot compliant air line fittings.
Temperature Range:_65°F to +250°F-40°C to +93°C push-to-connect fittings ptc air fittings push lock fittings.
Material:CA360 ,CA377 brass push air fittings tee brass fitting airline tee fitting air fittings 1/4 dot.

Check Stock

Utah Pneumatic Push To Connect Air Fittings Tube 3/8\ Od Straightair Air Line Union Push Fit Fittings Tube Fittings Air Line Push Connectors 10 Pack(3/8 Straight)

Air Line Quick Disconnect : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.

Check Stock

IQIHUI 7PCS AC Fuel Line Disconnect Tool,AC Line Disconnect Kit,Transmission Oil Cooler Line Quick Disconnect Kit for Ford GM Mazda More Vehicles,Size1/4 5/16 3/8 1/2 5/8 3/4 7/8 Inch

【Material】Fuel line quick disconnect heater hose disconnection tools are made of hard plastic to ensure strength and sturdiness..
【Founction】Oil cooler pipeline quick disconnect kit, used to disassemble/disconnect fuel pipeline, heater pipeline, AC cooling pipeline and other quick disconnect fittings..
【Application】The AC fuel line disconnect tool is compatible for most Ford, GM, Chrysler and Mazda models. It is also suitable for some other vehicles, and the automatic transmission line is within the size range..
【Easy to use】The compact size is easy to grasp, and the inclined design allows access to hard-to-reach areas. Place the notch against the fuel line to release the lock and remove it..
【Package】Transmission Line Removal Tool set contains 7 kinds of opening size: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch, 7/8 inch..

Check Stock

Utah Pneumatic Straight 1/4” Od Air Line Union push air fitting Quick Connect Fittings pneumatic push connect fittings Air Tube Fitting 10 Pack

straight pneumatic fitting : Air And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Air Line Fittings.
Pushlock Air Fittings And Water Pressure Range: 0-1 Mpa145 Psi Max Pressure:1.5 Mpa/ 217 Psi/15 Bar Temperature Range 0-60°C | 32～140°F Applicable Tube: Pu/Nylon/Soft Pe Airline Fittings.
Easy To Install This Quick Connect Tube Fittings Is Available In Various Styles And Models . Each Model To Serve Its Purpose. All Models Of Push Lock Fittings Are Designed To Suit Your Pneumatic Piping Needs Perfectly.
You Can Easily Change The Air Line Quick Connect Direction Even After Installation. The Release Ring Of Conforms With The Ellipse Design To Ensure That The Disconnecting Of Air Line Connections Is In Good Shape.
All Push-To-Connect Fittings Contains Internal Hexagonal Holes This Enhances The Installation Process In A Narrow Space.Push Connect Fittings Can Be Dismantled And Assembled Easily These Plastic Tube Connectors Meet The Pressures And Temperatures Mentioned.

Check Stock

8AN 20FT Fuel Line Hose Kit with End Fittings Nylon Stainless Steel Braid Black 1/2' - 11.12mm ID (AN8)

【Includes】The 8AN nylon and stainless steel braided CPE fuel line kit includes: 10pcs 8an CPE hose ends (4 x Straight Swivel Hose Ends, 2 x 45 Degree Swivel Hose Ends, 2 x 90 Degree Swivel Hose Ends, 2 x 180 Degree Swivel Hose Ends) and 1/2 CPE braided fuel line (Length:20ft/6M).
【Materials】The 8AN CPE fuel line Hose mostly used in cooler system and pump, fuel system, transmission system, Can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, coolant, fuel, and etc, but not applicable to E85..
【Lifetime】The 8AN CPE hose working temperature range: -40℉ to 257℉ (-40℃ to 125℃). It is compatible with nearly every substance or agent used. Maximum Working Pressure (psi): 500 psi. Bursting Pressure (psi): 2000psi..
【CPE Hose】The 8an CPE hose fitting is reused, just replaced a new olive/ferrule when reusing fittings with CPE hose. CPE tube is constructed with a seamless extruded CPE resin inner tube..
【Warranty】Three months limited warranty & Free lifetime technical support..

Check Stock

MuHize Transmission Cooling Hose - Upgraded 70 Inch SS Braided Transmission Cooler Line, Heavy Duty Transmission Cooler Hose Fitting 6AN Compatible with GM Chevy Ford Turbo 700R4 4L60E 4L65E 4L80E

PACKAGE INCLUDE - 2 x 70 inch 3/8 I.D. Stainless Steel Braided Hoses.
2 x AN-6 flared to 1/4 In NPT billet adaptors.
4 x AN-6 flared to 3/8 In NPT billet adaptors.
4 x 90-degree AN-6 inverted flare to AN-6 flare billet adaptors.
COMPATIBILITY - MuHize 70 inch transmission cooler hose fits for GM Chevy 1996-2021 4L80E, for Ford C4-C6-AOD, for Turbo 350/400/200-200R4/700R4 4L60 4L60E 4L65E..
DURABILITY - This transmission cooling line kit is made of high-strength PTFE(Teflon), which is resistant to high & low temperatures and is anti-corrosion. The precision braided stainless steel on the outside of the hose greatly increases the strength of the tube..
ANTI-LEAKAGE - The interface is covered with black rubber, which can effectively prevent leakage and ensure the normal operation of the hose..
DIFFERENT FITTINGS - Different sizes of fittings are for different cars and turbos. Please check as much as possible to make sure the transmission cooling hose is the one that you need..

Check Stock