Top Front Camber Plates Reviews

Tenhulzen Automotive - Digital Hands Free Camber/Caster Gauge, 0.1 Degrees Accuracy, No Turn Plates Needed!

  • Measure Camber and Caster at the track or in your garage..
  • Camber measurements accurate to within 0.1 degrees..
  • Measures Caster WITHOUT the need for expensive turn plates..
  • Digital readout can be calibrated for non-level surfaces in a matter of seconds..
Check Stock

Tenhulzen Automotive 2-Wheel Alignment Tool - All-in-one Camber/Caster/Toe Plates - Made in USA

  • All-In-One Tool Measures Camber, Caster, AND Toe!.
  • Patent Pending wheel stand-offs provide unparalleled accuracy..
  • Camber Accurate to Within 0.1 Degrees (much better than a bubble gauge)..
  • Expensive Turn Plates Are NOT Needed for Caster Measurment..
  • Detailed, Step by Step Video Instructions..
Check Stock

MOSTPLUS Full Coilovers Struts Compatible with 1988-1991 Honda Civic/CRX|1990-1993 Acura Integra Shock Absorber Assembly Set of 4

  • Fitment: Compatible with Acura Integra ( all model) 1990 -1993.
  • Compatible with Honda Civic / CRX ( Only fit Rear Forks Model) 1988 -1991. 【NOTE】:....
  • Camber plates / top mounts: adjustable & pillow ball design.
  • Please check your car information before purchase..
  • Installation Included, professional installation is highly recommended.
Check Stock

MOSTPLUS Full Coilovers Struts Compatible for Honda Prelude 1992 1993 1994 1995 1996 1997 1998 1999 2000 2001 Adjustable Height Suspension (Set of 4)

  • Application: Compatible for 1992-2001 Honda Prelude. 【NOTE】: These Coilovers Strut will "Lowering your car" and DOES NOT keep to Original Ride Height..
  • 45° Adjustable Camber plates / top mounts:Yes.
  • Please check your car information before purchase..
  • Professional installation is highly recommended.
Check Stock

MOSTPLUS Adjustable Height Coilovers Struts Compatible for 1993-2001 Acura Integra /1994-2000 Honda Civic (Set of 4)

  • [Application] --- Compatible with 1993-2001 Acura Integra. [ NOTE: These Coilovers Strut will "Lowering your car" about 5~10CM, DOES NOT keep to Original Ride Height ].
  • 20MM Rod with full dust cover will protect the damper and prolong usage time..
  • [Package Including] --- 2 pieces Front & 2 pieces rear, 2 Stainless Steel Wrenches, 2 clips + 2 spacers. Installation Included, professional installation is highly recommended.
  • 45° Adjustable Camber plates/top mounts: Yes.
  • [Twin-tube Structure] --- The twin-tube has longer stroke and higher height adjustability than mono-tube construction, it provide more comfortable riding experience by reducing the pressure and minimizing friction and ensuring sufficient travel with less effort.
Check Stock

Pedders 160033 Xa Adjustable Coilover Suspension Kit for Pontiac GTO

  • ... COLLARS AND UPPER MOUNTS MADE FROM 6061 ALUMINUM WITH T6 FOR INCREASED HARDNESS -Our spring perches, locking collars, top mounts and some lower mounts are made from high quality 6061 aluminum. Benefits include excellent strength and aluminum helps reduce weight..
  • CAMBER ADJUSTMENT ON MANY MODELS - Many of our applications that have pillowball upper mounts also have camber adjustability. This is extremely helpful when you need to dial in your camber for vehicle alignment purposes. This also eliminates the need for a separate camber kit. NOTE: Camber adjustment is not available on all models with pillowball upper mounts..
  • ADJUSTABLE LOWER MOUNT ALLOWING MAXIMUM SUSPENSION TRAVEL - Most of our coilovers feature the ability to adjust your ride height without affecting the shock and spring travel. This way you can set your desired ride height without having to worry about bottoming out the shock..
  • FITMENT AND SPRING RATES - Fits with Toyota Camry SE 2012-2017 XV50 | Lexus ES350 2013-2018. Has Front Spring Rate of 8.7 kg/mm & Rear Spring Rate of 5.1 kg/mm..
Check Stock

MOSTPLUS Coilovers Struts Compatible for XE10 Lexus IS200/IS300 1999 2000 2001 2002 2003 2004 2005 | 99-05 Toyota Altezza Adjustable Height/Tension Suspensions Set of 4

  • Application: Compatible for Lexus IS200/IS300 1999-2005 (usa, for JDM rs200) 4 Door.
  • Compatible for Toyota ALTEZZA 1999-2005 XE10/GXE10/JCE10/SXE10.....
  • 45° Adjustable Camber plates / top mounts:Yes.
  • Please check your car information before purchase..
  • professional installation is highly recommended.
Check Stock

Longacre® Racing 79501 Aluminum Toe-In Plates w/Magnets

  • These plates are the quickest and simplest way to check toe-in - any contact with other cars or retaining walls is likely to change the toe setting.
  • Easy to use - rest one of these plates against the tire on each side and measure toe directly using the 2 tape measures (included).
  • Get the most accurate reading - always remember to turn wheels so they are facing straight ahead on level ground and set caster and camber first.
  • The Longacre toe-in plates formed design is rigid for accuracy and stays put against the tire while the magnets hold the tape in place.
  • The dimensions of the Longacre toe-in plates are 23-1/2" x 9" and are sold as a pair with two 3/4" tapes that feature 1/32" increments.
Check Stock

MOSTPLUS Coilover Compatible with Volkswagen VW 2007-2009 GTI / 2003-2007 Golf MK5 Adjustable Height Suspensions Coil Spring Struts (Set of 4)

  • Application: Compatible with Volkswagen GTI 2006-2009 / Compatible with Volkswagen Golf 2003-2007.【NOTE: These Coilovers Strut will "Lowering your car" and DOES NOT keep to Original Ride Height.】.
  • 20MM Rod with full dust cover will protect the damper and prolong usage time..
  • 45° Adjustable Camber plates / top mounts:Yes.
  • Please check your car information before purchase..
  • Installation Included, professional installation is highly recommended.
Check Stock

MOSTPLUS Coilover Compatible with 1986-1992 Toyota Supra Hatchback 3.0L MK3 MA70 GA70 JZA70 Adjustable Height Suspensions Lowering Struts Kits Set of 4

  • Compatible with Toyota SUPRA 1986 -1992 Hatchback 2-Door 3.0L.
  • Chassis Code: MA70 GA70 JZA70. NOTE: These Coilovers Strut will "Lowering your car"....
  • 20MM Rod with full dust cover will protect the damper and prolong usage time..
  • 45° Adjustable Camber plates / top mounts:Yes.
  • Please check your car information before purchase..
  • Installation Included, professional installation is highly recommended.
Check Stock

MOSTPLUS Coilovers Struts Compatible for E90 E100 E110 AE92 AE101 AE111 1988-1999 Toyota Corolla Adjustable Height Suspensions Shock Struts (Set of 4)

  • [Application] --- Compatible with 1988-1999 Toyota Corolla E90 E100 E110 AE92 AE101 AE111 (Note: NOT compatible with AE102).【NOTE】: These Coilovers Strut will "Lowering your car" and DOES NOT keep to Original Ride Height..
  • [Package Including] --- 2 pieces Front & 2 pieces rear, 2 Stainless Steel Wrenches . Installation Included, professional installation is highly recommended.
  • 4 bolts in top mount is enough and more convenient to install. Customer can adjutst Height based on their own preference..
  • 45° Adjustable Camber plates / top mounts:Yes.
  • [Material] --- Most components are made from 6063 aluminum with T6 to increase hardness -- Excellent strength and aluminum helps to keep the weight down. ( Please check your car information before purchase.).
Check Stock

Caster Camber Tool, Wheel Camber Gauge, DECO Magnetic Caster Camber Gauge Suspension Tool, Aluminum Magnetic Camber Adjustment Tool, Wheel Alignment Tool

  • This DECO caster/camber gauge allows you to take precision caster and camber readings quickly, easily, and accurately.
  • Measures +8° to -4° caster range and +6° to -6° camber range.
  • The gauge is machined at 20 degrees on both ends for easy and accurate caster settings.
  • Anodized purple with laser-etched markings for easy readings.
  • Equipped with a magnetic adapter which woks for many rear wheel drive vehicles with cast iron front hubs or rotors.
Check Stock

MOSTPLUS Adjustable Height Coilovers Struts Compatible for 1994-2001 Acura Integra /1992-2000 Honda Civic /1993-1997 Honda Civic del Sol Shock Absorber Assembly (Set of 4)

  • [Application] --- Compatible with 1994-2001 Acura Integra.
  • Compatible with 1993-1997 Honda Civic del Sol (Need spacers for rear coilover only). [ NOTE: These Coilovers Strut will "Lowering your car" about 5~10CM, DOES NOT keep to Original Ride Height ].
  • 20MM Rod with full dust cover will protect the damper and prolong usage time..
  • [Package Including] --- 2 pieces Front & 2 pieces rear, 2 Stainless Steel Wrenches, 2 clips + 2 spacers. Installation Included, professional installation is highly recommended.
  • 45° Adjustable Camber plates / top mounts:Yes.
  • [Twin-tube Structure] --- The twin-tube has longer stroke and higher height adjustability than mono-tube construction, it provide more comfortable riding experience by reducing the pressure and minimizing friction and ensuring sufficient travel with less effort.
Check Stock