Top Fiber Terminal Reviews

Electronics-Salon Prototype Screw/Terminal Block Shield Board Kit for Arduino MEGA-2560 R3.

Prototype Screw/Terminal Block Shield Board Kit For Arduino MEGA-2560 R3..
FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm..
Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs )..

Standard DB62HD Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
FR-4 fiber glass PCB, dual copper layers..

Support AC and DC control signal, Relay action LED indicator, relay coil protection by means of a freewheeling diode..
Panasonic PA1a SPST-NO 5Amp power relay. Original Panasonic PA1a-PS pluggable socket for support replacement relay, and with removal key..
Dinkle high quality fireproof nylon material DIN rail mount housing, can support width 35mm, 32mm and 15mm rail..
High quality screw terminal blocks and clear marking label for terminal block position. Pitch 5.08mm/0.2" and 7.62mm/0.3" screw terminal block. Wire range 26 to 12AWG / 2.5mm square. Screws - M2.5, steel, Cr3+ Zn plated. Pin header and Cage - Brass..
High quality glass fiber FR-4 PCB, top and bottom dual copper layers..

Package Include: 2pcs x Top Post Battery Disconnect Switch, 2pcs x Battery Terminal Anti Corrosion Washers Fiber..
Material: Brass Battery Switch Made of Heavy Duty Brass Alloy,Durable Zinc Alloy Terminal.Heavy Duty,Suitable for Most Batteries..
Wide Application: Used for Car, Vehicle, RV and Boat Batteries Which have a Standard 15-17 mm Cone top post terminal, also used for electrical....
Used for top post terminal, 15-17 mm cone battery negative post only, DC 12 V system, rated current: 125 A, On/Off 2 position.under the condition of....
Always remember to turn off your vehicle before disconnecting the battery. This will prolong the lifespan of the battery, the electrical components,....

Standard DB50 Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
FR-4 fiber glass PCB, dual copper layers..
High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....

PCB: FR-4 fiber glass PCB, dual copper layers, size 120mm x 78mm. Pads grid / pitch 2.54mm / 0.1", hole diameter 0.8mm. Terminal block pitch 3.5mm / 0.138", hole diameter 1.2mm..
Terminal Block: Pitch 3.5mm / 0.138" mini terminal blocks, total 84 pins(3pole x24pcs, 2pole x6pcs ). Wire range 26~16AWG, strip length 5mm, screws M2 steel, pin header and cage brass..
Female Header Socket: Pitch 0.1"/2.54mm, pin length 15mm / 0.59" Single row 10pin x1pcs, singal row 8pin x 5pcs, dual row 18pin x1pcs..
Note: This is not original Arduino product.it only a substitute accessories from ARCELI.

Pitch 3.81mm/0.15" screw terminal block..
Terminal block: wire range 26-16AWG, strip length 5mm, Metric M2 slotted screw..
FR-4 fiber glass PCB, dual copper layers..
Module Dimensions: 83mm x 87mm x 45mm (W x L x H)..

PCB Dimensions: 20.3 x 73mm. Thickness : 1.6mm. Material : FR-4 (glass fiber). All holes are plated through, top and bottom solder pad are identical..
CN1 and CN2 3Pin terminal blocks pin pitch 5.0mm/0.197", other pads grid (pitch) 2.54mm / 0.1", hole diameter 0.9mm..
Terminal Block: Pitch 5.0mm/0.197" screw terminal blocks. Wire range 26 to 12AWG / 2.5mm square. Strip length 7mm / 0.28” Screws - M2.5, steel, Cr3+....
Taiwan DINKLE fireproof nylon material DIN rail mount carrier(not China low quality carrier), can support width 35mm, 32mm and 15mm rail..
External dimensions: L22.5mm x W78mm x H40.1mm.

Terminal Block Breakout Module - for Arduino MEGA-2560 R3. the item has been soldered and assembled..
Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
With power on LED indicating. red reset button on the side. with a ICSP adapter connect header..
FR-4 fiber glass PCB, dual copper layers..
NOTE: the item not include Arduino Mega module.

Terminal Block Breakout Shield Module - for Arduino UNO R3. the item has been soldered and assembled..
Terminal block pitch 3.5mm/0.138", wire size range 26AWG to 16AWG, strip length 5mm, screw M2 steel, pin header and cage copper..
Standard IDC40 pitch 0.1" header, you can use 40pin FRC(flat ribbon cable) connector cable connect all Arduino Uno pins to peripheral equipment..
With power on LED indicating. red reset button on the side. with a ICSP adapter connect header. FR-4 fiber glass PCB, dual copper layers..
NOTE: the item not include Arduino Uno module..

UPGRADE YOUR SPEAKER SYSTEM: Simplify the process by utilizing these speaker enclosures to add additional 6-Inch by 9-inch speakers to your vehicle.
ENCLOSURE MATERIALS: The enclosure is constructed of 3/4" MDF carpet with a poly fiber damper lining and nickel-plated spring terminals. Reinforced with glued joints and seams..
COVER MATERIALS: Speaker box comes carpeted with a standard grey trunk liner for maximum durability.
INCLUDED IN PACKAGE: 1 pair of pre-wired enclosures, terminal cup, baffle material, and mounting screws..
CONVENIENT INSTALLATION: Terminal cup connectors allow for speaker wires to easily connect to the speaker boxes.

The item has been soldered and assembled. Support for Raspberry Pi 1 Model B+, Pi 2 Model B, Pi 3 Model B, Pi 3 Model B+, Pi 4 Model B, Pi Zero, Pi Zero-W..
Terminal block pitch 2.54mm/0.1", wire size range 28AWG to 18AWG, strip length 4.5mm, screw M1.6 steel, pin header and cage copper..
FR-4 fiber glass PCB, dual copper layers..
2x20 positions header connect to Raspberry Pi board..
Packing list: 1x terminal block breakout module, 4x M2.5x6mm screws, 4x 10mm nylon standoffs. 2x 11.5mm brass standoffs, 1x small slotted screwdriver (NOTE: the item not include Raspberry Pi Board)..

The item has been soldered and assembled, support for Raspberry Pi Pico..
The terminal block label can clearly identify the position of the functional pins..
FR-4 fiber glass PCB, dual copper layers. 2x20 positions header connect to Raspberry Pi board..