Top Exhaust Manifold Flange Gasket Reviews

FEL-PRO MS 96696 Intake Manifold Gasket Set

  • A leaking valve cover can be dangerous. The smoke and vapor from the oil burning as it hits a hot exhaust manifold can enter the cabin of the boat. So it is important to install a quality valve cover gasket - GOHAWKTEQ.
  • Replaces# Fel-Pro VS50504R-1, includes 2 gasket, 8 grommet and 1 piece exhaust air pipe flange gasket..
  • Application: Silverado 1500 2500 3500, GMC Sierra 1500 2500 3500,,Buick and more vehicles please check the Part Finder or Product Description.
  • Tips for replacing: 1. Using Spray Adhesive to seal the gaseket on the valve cover and not go anywhere. 2. Using RTV Silicone Gasket Maker to hold the high edge of gasket in position and inside the cover edge.3. Don't scar the valve cover surface when carving the debris.A soft brush can be affective in removing debris..
  • Warranty: This fValve Cover Gasket comes with 30 days HASSLE-FREE RETURN & 1 year UNLIMITED REPLACEMENT PROMISE. If the gasket has any problem, just send us a picture, and we will ship a replacement to you!.
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 3003 Exhaust Gasket for Ford V8 Engine, (Set of 2)

  • 1-1/8 inch width x 1-1/2" height Stock Square Port.
  • Ford V8 - 302 ('81-'95), 351 ('69-'97) Windsor, 1-1/8" x 1-1/2" Square Port, Manifold or Headers, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

2-Bolt 2.5inch 62mm Exhaust Flange Gasket Turbo/Manifold/Header Down/Dump Pipe Flange 5 PCS

  • Brand New Aftermarket Exhaust Flange Gasket, including 5 PCS 120-07610-0005.
  • Multi Layer Stainless Steel to Ensure Long Service Life.
  • Universal Fitment, suitable for Turbo/Manifold/Header Down/Dump Pipe.
Check Stock

Remflex 2008 Exhaust Gasket for Chevy V8 Engine, (Set of 2)

  • Chevy V8 - 4.8L, 5.3L, 6.0L LS2 ('99-'08), 5.7L, LS1 LS6 ('97-'08), includes Vortec, Manifold or Headers, 2/Set.
  • Port configuration comparable to Fel-Pro 1440.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

maXpeedingrods New GT25 GT28 GT2871 Turbo Charger 350BHP+ 0.64 A/R, GT2860 SR20 CA18DET 5-Bolt Flange Universal Turbocharger for 1.5L-2.0L Engine Water + Oil Cooled Turbo W/Gaskets

  • 【Application】：Universal for Turbo Manifold with T25 Flange(T28 Flange can be converted to T25 Flange, Adrapter is needed). Perfect for all 1.5L-2.0L engine.
  • 【Specification Size】Exhaust (Turbo Manifold) Flange: T25 4-Bolt Flange / Exhaust (Downpipe) Flange: 5-Bolt Flange.
  • 【Horse Power】: Boost Horse Power up to 350BHP.
  • 【Cooling Type】: Water and Oil Cooled. Oil Restrictor: Yes . [Oil Thread Size: M12*1.25 & Water Thread Size: M8*1.25].
  • 【Important Notice】:1. This Turbo is not vehicle specific. It is compatible with a wide range of applications therefore please check the specifications and verify compatibility prior to placing your order. 2. Some modification may be required, professional installation is highly recommended (No Instruction Included).
Check Stock

New MLS Head Gasket Set, Head Bolt Kit, Intake & Exhaust Engine Valves Compatible with 99-05 SAAB/SUBARU 2.5L 2458CC H4 SOHC, (16 Valve),”EJ25″

  • Aftermarket OE Replacement : Meets or exceeds OE standard quality and performance requirements..
  • COMPATIBLE WITH: 1999-05 Subaru Saab 2.5L 2458CC H4 “SOHC” (16-Valves) Eng.Code “EJ25”.
  • Includes : MLS (Multi-Layered Steel) Head Gasket (Improved Design) Intake Manifold Gaskets Exhaust Manifold Gaskets Valve Cover Gaskets Spark Plug Tube Seals Grommets Viton Valve Stem Seals Camshaft Front Seals Circular Plug (Valve Cover) EGR Valve Gasket Throttle Body Mounting Gasket Other Small Gaskets, Seals, And O-Rings Head Bolt Set (12 Pcs) RTV Gasket Silicone (Silicone brand may vary depending on availability) Intake & Exhaust Valves (16 Pcs).
  • Note : Upper Intake Manifold Gaskets (Plenum Gaskets) are “NOT” Included.
  • CONFIRM THIS PART FITS YOUR VEHICLE BEFORE PURCHASING (Check Fitment Data Above).
Check Stock

Exhaust Manifold Gasket Spring Rebuild Kit with Clamp for Polaris Ranger RZR 800 2008-2010 Replaces 3610047 7041687 7041804 5811511

  • 【Top quality materials】Made of high temperature resistant graphene material. Strong airtightness, can withstand 800-1000 degrees, more durable than the original..
  • 【Why need to replace】Extreme temperatures, oil and coolant contamination, and constant exhaust blockage can wear out gaskets and cause leaks between the cylinder head and manifold..
  • 【Fitment】Replacement for P-olaris Ranger 700 (Does NOT fit Crew or 6x6) 2009.
  • For P-olaris Ranger 800 Full Size (Including Crew) 2010-2012.
  • 【Replaces part number 】3610047, 5811511, 7041687, 5250091 7041789.
  • 【Package includes】2 exhaust manifold gasket, 3 Exhaust Gasket Seal, 9 Exhaust Spring.
Check Stock

TD04 TD05 VF40 VF46 VF39 VF52 EJ20 EJ25 Turbo Gasket Kit For Subaru 2.0L 2.5L

  • Turbocharger Exhaust Manifold Downpipe Gasket for Subaru WRX TD04 TD05 VF Series.
  • All original gaskets materials uesd the best meterial.
  • No instructions included, professional install recommended.
  • Application : TD04 TD05 and VF series turbos with a 3 bolt flange.
Check Stock

Universal Turbo Turbocharger T3 T4 T04E A/R .50 A/R .63 V-band Oil 1.5-2.5L SCB

  • Exhaust (Downpipe) Flange: V-Band Flange.
  • Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns.
  • Horse Power: Boost Horse Power up to 420HP.
Check Stock

Universal T04E T3/T4 .57 A/R 57 Trim Turbo Charger Compressor 400+HP Boost Stage III Universal Turbocharger

  • Application: Perfect for 1.5L-2.5L engines.
  • Boost pressures are 7psi(.5 Bar) to 21psi(1.5 Bar).
  • Exhaust (Turbo Manifold) Flange: T3 T4 4 bolt Flange Patterns, Exhaust (Downpipe) Flange: Standard T3 5 bolt downpipe flange pattern.
  • Specification: [Compressor: Trim: 55/A/R: .5.
  • Professional installation is highly recommended (No Instruction Included).
Check Stock