Top Drill Pipe Power Tongs Reviews

DURATECH Inside Pipe Cutter with 2 Replaced Blades, for PVC and Plastic Pipe

Comes with 2 extra replaced blades. Heat-treated steel, 1.2mm blade thickness, black coating ensures durability. Sharp saw-tooth design for faster cutting..
Nickel-plated shaft can effectively prevent the product from corrosion. With high hardness, the tool ensures daily operation needs, and can cut up to 6mm thickness PVC pipe, plastic pipe..
Need to connect with power drill to use, and is easy to installation. Could be a great helper in cutting out drain stubs or repairing broken pipes..
TIPS: Before cutting in a pipe, please make sure the blade is locked tightly into the shaft. Otherwise, the inner pipe cutter may not exert its function well..
Caution: When the cutter is connected with a drill, it could be dangerous. Be aware of the sharp edge, and always wear protection to avoid hurting..

Check Stock

Toledo Pipe KIT HC 3092 Pipe Hole Cutter Chain Vise and Milwaukee 1660-6 1/2" Compact Drill 450 RPM

The Toledo Pipe HC 3092 Easily attaches to various sizes of pipe and conduit..
Making it effortless to drill up to a 4 1/2" hole into the side of pipe or conduit without slipping..
Clamping the drill to the pipe also guarantees perfectly square, centered holes..
Comes with Milwaukee 1660-6 1/2" compact drill..
Max Drill Capacity: 4 1/2", Min Pipe Size: 1 1/4", Max Pipe Size: 12", Chain Length: 36".

Check Stock

Disconnect Tongs Tool with Depth Gauge and Pipe Deburring Tool Combination Set for Push to Connect Fittings Removal Tool for Disconnect Clamp for 1/2",3/4",1" Plastic PEX CPVC Copper Pipe Fittings

【Package Includes】1 pcs disconnect tongs tool.
1 pcs deburr &gauge tool .the disconnect tongs have 3 size teeth available, can easily remove the push fit fitting from pex, cpvc or copper pipe of 1/2 inch, 3/4 inch or 1 inch.it can deburr the cut end of the pipe & bevel the cut edge, ensure complete seal and smooth connection..
【Quality Material】the push to connect fittings removal tool is made of 40cr steel and tpr coated grips prevent slippage in wet conditions and one-handed operation for in-tight situations.good grips, hefty build to allow your free hand the ability to assist in the removal of fittings..
【Deburr and Gauge Tool】 deburring tool is made of lightweight and durable pvc.ideal for marking pipe depth and deburring..deburring tool is compatible with 1/4 to 1 inch sized pex, copper, cpvc, pe-rt and sdr-9 hdpe pipe.
【Fast Disconnection】 simply align the tool with pipe and fitting and squeeze to remove push-to-connect fittings effortless and quickly. deburring pipe and depth gauge tool, easy measure insertion depth and deburring pipe after pipe is inserted..

Check Stock

CTA Tools 9030 Fluted Screw Extractor Set 5-Piece

Bolt, Stud or Screw Size: 1/4 to 5/16-Inch and Drill Size: 1/8-Inch.
Bolt, Stud or Screw Size: 3/8-Inch and Drill Size: 3/16-Inch.
Bolt, Stud or Screw Size: 7/16-Inch and Drill Size: 15/64-Inch and Pipe Size: 1/8-Inch.
Bolt, Stud or Screw Size: 1/2 to 9/16-Inch and DrillSize: 5/16-Inch and Pipe Size: 1/4-Inch.
Bolt, Stud or Screw Size: 5/8-Inch and Drill Size: 3/8-Inch and Pipe Size: 3/8-Inch.

Check Stock

scottchen PRO Inside Pipe Cutter 1-1/2\(36mm) Internal PVC Plastic Pipe Cutting Tool Diamond Cutting Blade-1set

【Function】This inner pipe cutting tool excellent to cut the pipe from inside which normal pipe cutter hard to reach..
【Size】The pipe cutter diamond cutting blade is 1-1/2” diameter, suitable for cutting 1-1/2” and above size pipe. The shank 4” length, can reach deeper place to do cutting project..
【Appliance】This plumbing tool ideal for various pipe cutting, such as: PVC, HDPE, CPVC and ABS plastic etc, fast cutting without melting the pipe..
【Guide wheel】The bottom guide wheel great for fast and stable pipe cutting, minimizes vibration during the work progress, form a perfect straight cutting edge appearance..
【Installation】The internal PVC cutter easy to install (detail as image). The shaft with 1/4” hex head quick mount to hand power drill. NOTE: Must rotary Anti-clockwise. Before cutting, please put something in the pipe to prevent it from falling off..

Check Stock

Wheeler-Rex 2290 Internal Plastic Pipe Cutter 2-Inch Schedule 40 Pipe

Easily preset for depth of cut, they are installed in the pipe and make their cuts in seconds..
Recommended user supplied power source: 1/2-Inch capacity, 350-450 rpm drill, rated at 4.6 to 6-Amp.

Check Stock

Wheeler-Rex 4290 Internal Plastic Pipe Cutter 4-Inch Schedule 40 pipe

Easily preset for depth of cut, they are installed in the pipe and make their cuts in seconds.
Recommended user supplied power source: 1/2-Inch capacity, 350-450 rpm drill, rated at 4.6 to 6-Amp.

Check Stock

WADEO HVAC Repairing Tools, Air Conditioner Copper Tube Swaging Tool with Expander Drill Bit, Copper Pipe Cutter and Deburring Tool for Copper, Aluminum and Thin Stainless Steel Tube

Drill Bits: Made of durable and wear-resistant bearing steel, it is not easy to break, When the air conditioner is installed, These drill bits can expand the copper pipe, so you can link the two copper pipes to each other..
Mini Copper Pipe Tubing Cutter(1/8" - 1 1/8"): It can cut copper tube, steel pipe, stainless steel tubing, aluminium piping PVC and iron. But we do not recommend cutting PVC pipe as it’s a lot more difficult to cut..
Deburring Tool: With ergonomic handle for secure grip, the blade is mounted on the handle can be rotated 360 degrees, this tool helps to clean the top of the pipe or tube and it has a compact size which is easy to be carried to anywhere.(The blade is hidden in the pen holder).
Drill Bits Size: 1/4'', 3/8'', 1/2'', 5/8'', 3/4'', 7/8''.
Package Include: 3-28mm（1/8"-1-1/8"）Tube or Pipe Cutter*1.

Check Stock

1.5 Inch PVC Pipe Reamer, Plumbing Fitting Saver Bit Socket Saver Bit for Removing SCH 40 from Hub Practical Plumbing Tools for PVC Pipe Compatible with 1\\/2 Speed Power Drills

Package Content: You will receive a socket saver for removing SCH 40 from a hub and suitable for 1/2 inch variable speed drills. It can easily cut various plastic pipes, such as ABS, PVC and DWV pipes..
Premium Material: Our inside pipe cutter for PVC pipe is made of high quality stainless steel, sturdy enough and durable, not easy to break or bend. You can use it with confidence..
Practical: You only need to cut the broken part of pipes with our plumbing tools. No need to replace the whole pipe, thus it can save your time and energy to repair broken pipes. Very practical..
Easy to Use: You just need to install the socket saver on your power drills, then place it in the pipe and start to drill, lastly clean the inside of pipe and connect with new pipe connector..
Important Tips: Please ensure the size of our product to match your power drills before ordering. Sharp pipe reamer should be away from kids to prevent accidental injuries..

Check Stock

ABN Exhaust Pipe Expander Tool - Tail Pipe Expander Exhaust Expander, Exhaust Pipe Stretcher Kit 1-5/18 to 4-1/4 Inch

[Increase Engine RPM]: Expanding your tailpipe with the ABN Exhaust Tube Expander Tailpipe Expander Kit to increase exhaust volume and to give you more power for your engine.
[Easy to Use]: Lubricate all parts of the exhaust pipe bender stretch tool and attach correct sleeve.
Insert pipe spread tool into pipe, connect to existing drill, and expand.
Pipe might need to be warmed during winter months to prevent damage while using exhaust flare tool.
[Expand Most Metals]: Tailpipe expander tool kit great for all types of pipes, from aluminum to stainless steel.
Exhaust pipe expanding tool can expand piping from 1-5/18 to 4-1/4 inches (3.3 to 10.8cm).
[Easy Storage]: HVAC pipe expander parts come in a plastic storage case to keep the steel and copper pipe expander kit organized.
[Contents]: Exhaust pipe expansion tool kit includes a 3/4-inch and 1/2-inch (1.9 and 1.3cm) shank collet expander chuck, 5 expander sleeves, and 2 packs of black rubber O ring replacements.

Check Stock

Electric Drill Plate Cutter,Electric Drill Shears,Drill Attachment Metal Cutter,Sheet Metal Cutter Drill Attachment,Double Headed Sheet Metal Nibbler Cutter for Cutting Metal Plates Hard Materials 1

【High Quality】Fits Any Drill That Works Between 1500-3000 , More Easy And Powerful Than Normal Shears And Snips.It Should Used With An 8mm....
【Safe and Durable】No contact with the saw blade or blades, and no injuries to hands. Equipped with a robust metal gear head designed for long life....
【Accurate and Precise】Features a positioning slot for accurate sizing to complete a wide range of metal pieces such as iron. Our metal nibbler....
【Easy to Use】Quickly turn your power drill into power shears with this innovative metal nibbler attachment that fits perfectly into your drill’s....
【Wide Application】The versatile electric drill shears, Perfect For Car And House Maintenance Like Metal Roof Cutting, HVAC Vent Pipe And Other....

Check Stock

HVAC Tools Drill Bit Set Air Conditioner Copper Pipe Expander Swaging Tool Copper Tube Flaring Tool Spin Bit Set 6 Pcs Bit Kit Includes 1/4 3/8 1/2 5/8 3/4 7/8 Bits

【6 Pipe Sizes】6 different sizes of drill bits, including 1/4", 3/8", 1/2", 5/8", 3/4", 7/8", 1/4" triangular handle. Our pipe expansion tool are....
【Working Principle】 When connecting the copper pipes of the air conditioner, the soft copper pipes are expanded by the rotation of the drill bit,....
【High Quality Material】The drill bit is made of ball bearing steel, with high strength, not easy to break, wear-resistant and durable. The....
【Easy to Use】It is very suitable for HVAC installers to perform air conditioning copper pipe expansion operations without complicated learning.....
【Easy to Carry& Store】 Compared with other copper pipe flaring tools, our drill bit set can be carried with you or placed in the tool box, it does....

Check Stock

BTSHUB Pipe Stretcher Kit, 28mm Exhaust Pipe Expander Stretcher Tool Set, 1-5/8 to 4-1/4 Inches, Expander Tool for Tail Pipe Tube

..., which increases vehicle RPM to give you more power for your engine.
Perfect for home DIY or professional auto shops..
[Easy to Use]: Simply lubricate all parts of the exhaust expander tool, attach sleeves as needed, insert pipe spreader into the pipe, connect to existing drill, and expand away.
Pipe might need to be warmed during winter months to prevent damage while using tube expander. Use a 1/2" or 3/4" impact wrench to save even more effort..
[Wide Application ]: Tailpipe expander kit great for all types of pipes, from aluminum to stainless steel.
The exhaust pipe stretcher offers various collets for a broad expansion range from 1-5/8" to 4-1/4"..
[High Quality]: All collets are made of aerospace-grade 6061 Aluminum while the expander utilizes Tempered 40CR Alloy Structural Steel, ensuring rugged rigidity over an extended service life..

Check Stock